19-1181; Rev 3; 2/07
VHF-to-Microwave, +3V,
General-Purpose Amplifiers
____________________________Features
The MAX2630/MAX2631/MAX2632/MAX2633 are lowvoltage, low-noise amplifiers for use from VHF to
microwave frequencies. Operating from a single +2.7V
to +5.5V supply, these devices have a flat gain
response to 900MHz. Their low noise figure and low
supply current make them ideal for receive, buffer, and
transmit IF applications.
♦ Single +2.7V to +5.5V Operation
The MAX2630/MAX2631 are biased internally, eliminating the need for external bias resistors or inductors. The
MAX2632/MAX2633 have a user-selectable supply current, which can be adjusted by adding a single external
resistor. This allows customized output power and gain
according to specific applications requirements. The
MAX2631/MAX2633 feature a shutdown pin that allows
them to be powered down to less than 1µA supply current. Aside from a single bias resistor required for the
MAX2632/MAX2633, the only external components
needed for this family of amplifiers are input and output
blocking capacitors and a VCC bypass capacitor.
The MAX2630 comes in a 4-pin SOT143 package, requiring minimal board space. The MAX2631/MAX2632
come in small 5-pin SOT23 packages. The MAX2633
comes in a 6-pin SOT23 package.
♦ 1µA Shutdown Current (MAX2631/MAX2633)
________________________Applications
Global Positioning Systems
Cellular Phones
Wireless Local Area Networks
ISM Radios
Wireless Local Loops
TV Tuners
Land Mobile Radios
Set-Top Boxes
__________Typical Operating Circuit
♦ 6.6mA Supply Current (insensitive to supply
voltage)
♦ 3.7dB Noise Figure
♦ 13.4dB Gain
♦ Ultra-Small SOT Packages
______________Ordering Information
PART
TEMP RANGE
PINPACKAGE
SOT TOP
MARK*
MAX2630EUS-T
-40°C to +85°C
4 SOT143-4
DG_ _
MAX2631EUK-T -40°C to +85°C
MAX2632EUK-T -40°C to +85°C
MAX2633EUT-T -40°C to +85°C
5 SOT23-5
5 SOT23-5
6 SOT23-6
AABK
AABL
AAAA
*The first two letters in the SOT top mark identify the part,
while the remaining two letters are the lot-tracking code.
_________________Pin Configurations
TOP VIEW
OUT
1
MAX2630
4 VCC
GND
2
SHDN 1
5
IN
4
VCC
6
IN
5
BIAS
4
VCC
MAX2631
GND 2
3 IN
AABK
Cordless Phones
♦ Adjustable Bias (MAX2632/MAX2633)
DG_ _
Personal Communicating Systems
♦ Internally Biased (MAX2630/MAX2631)
OUT 3
SOT143
SOT23-5
CBLOCK
ON
SHDN
OFF
BIAS
IN
IN
BIAS 1
5
IN
SHDN
1
MAX2632
CBLOCK
GND 2
VCC
OUT
OUT
RBIAS
MAX2633
VCC
OUT 3
GND
4
VCC
2
AAAA
BIAS
AABL
GND
MAX2633
OUT 3
CBYP
SOT23-5
SOT23-6
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX2630–MAX2633
_______________General Description
MAX2630–MAX2633
VHF-to-Microwave, +3V,
General-Purpose Amplifiers
ABSOLUTE MAXIMUM RATINGS
VCC to GND ................................................................-0.3V to 6V
Input Power.........................................................................5dBm
OUT Current .....................................................................±12mA
IN to GND Voltage ...................................................-1.2V to 1.2V
Bias to GND Voltage ....................................................0.0V to 3V
Voltage at SHDN Input
(MAX2631/MAX2633) ............................-0.3V to (VCC + 0.3V)
Current into SHDN Input (MAX2631/MAX2633).................100µA
Continuous Power Dissipation (TA = +70°C)
SOT143 (derate 4mW/°C above +70°C) .....................320mW
SOT23-5 (derate 7.1mW/°C above +70°C).................571mW
SOT23-6 (derate 7.1mW/°C above +70°C).................571mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
CAUTION! ESD SENSITIVE DEVICE
ELECTRICAL CHARACTERISTICS
(VCC = +3V, Z0 = 50Ω, fIN = 900MHz, RBIAS = 10kΩ (MAX2632/MAX2633), V SHDN = VCC (MAX2631/MAX2633), TA = +25°C, unless
otherwise noted.)
CONDITIONS
PARAMETERS
Operating Temperature Range
(Note 1)
Supply Voltage
Power Gain
MIN
MAX
UNITS
-40
85
degrees
2.7
5.5
V
TA = +25°C
11
TA = TMIN to TMAX (Note 1)
9.4
TYP
13.4
dB
Noise Figure
3.8
dB
Output 1dB Compression Point
-11
dBm
Output IP3
-1
dBm
Input Voltage Standing-Wave Ratio
fIN = 800MHz to 1000MHz
1.3:1
Output Voltage Standing-Wave Ratio
fIN = 800MHz to 1000MHz
1.25:1
RBIAS = 40kΩ
Supply Current
1.3
1.5
VCC = 3V, TA = +25°C
5.5
6.5
8.0
RBIAS =10kΩ VCC = 3V, TA = TMIN to TMAX (Note1)
4.2
6.5
9.2
5.2
6.5
11.0
15
17
VCC = 2.7V to 5.5V, TA = +25°C
RBIAS = 500Ω
Shutdown Supply Current
MAX2631/MAX2633
SHDN Input Low Voltage
MAX2631/MAX2633, VCC = 2.7V to 5.5V
很抱歉,暂时无法提供与“MAX2633EUT+T”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 1+4.652481+0.56056
- 10+4.5304710+0.54586
- 50+4.4410050+0.53508
- 100+4.35966100+0.52528
- 500+4.33526500+0.52234
- 1000+4.327131000+0.52136
- 2000+4.319002000+0.52038
- 4000+4.319004000+0.52038