MAX3120ESA+T

19-1390; Rev 0; 10/98 Low-Profile, 3V, 120µA, IrDA Infrared Transceiver The MAX3120 IrDA 1.2-compatible infrared transceiver is optimized for battery-powered, space-constrained applications. It consumes only 120µA while supporting data rates up to 115kbps over a wide 3V to 5.5V operating range, and features a 10nA shutdown mode to further extend battery life. The MAX3120 reduces the space required for IrDA applications by requiring a minimum of external components: photodiode, infrared LED, and current-setting resistor. Optical components are external to allow maximum flexibility in PC board design. The MAX3120 is available in 8-pin µMAX and SO packages. The µMAX package consumes half the board space of an 8-pin SO. Applications IrDA Applications Features ♦ IrDA 1.2 Compatible: 2.4kbps to 115.2kbps ♦ +3V to +5.5V Single-Supply Operation ♦ Flexible Optics Selection and Layout ♦ 120µA Supply Current ♦ 10nA Shutdown Supply Current ♦ 200mA, High-Current Infrared LED Drive Ordering Information PART TEMP. RANGE MAX3120CUA 0°C to +70°C 8 µMAX PIN-PACKAGE MAX3120CSA MAX3120EUA MAX3120ESA 0°C to +70°C -40°C to +85°C -40°C to +85°C 8 SO 8 µMAX 8 SO Personal Digital Assistants (PDAs) Palmtop Computers Cell Phones Hand-Held Equipment Typical Operating Circuit Peripherals +3.3V Pin Configuration VCC VCC SHDN CS TOP VIEW LED TX SCLK TXD LEDC DIN DOUT TXD 1 8 RXD VCC 2 7 LEDC GND 3 6 PGND PINC 4 5 SHDN MAX3120 µMAX/SO MAX3100 MAX3120 RX GND RXD GND PINC PGND PIN DIODE ________________________________________________________________ Maxim Integrated Products 1 For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800. For small orders, phone 1-800-835-8769. MAX3120 General Description MAX3120 Low-Profile, 3V, 120µA, IrDA Infrared Transceiver ABSOLUTE MAXIMUM RATINGS (Referred to GND) VCC ...........................................................................-0.3V to +6V TXD, SHDN, LEDC ...................................................-0.3V to +6V RXD ............................................................-0.3V to (VCC + 0.3V) PGND ....................................................................-0.1V to +0.1V PINC....................................................................................10mA Continuous LEDC Current.................................................200mA Repetitive Pulsed LEDC Current (