19-0420; Rev 2; 7/02
10Ω, Quad, SPST, CMOS Analog Switches
________________________Applications
____________________________Features
♦ Pin Compatible with DG411/DG412/DG413
♦ Low On-Resistance (6.5Ω typical)
♦ Guaranteed RON Match Between Channels (1.5Ω max)
♦ Guaranteed RON Flatness over Specified Signal
Range (2Ω max)
♦ Guaranteed ESD Protection > 2000V per Method
3015.7
♦ Crosstalk > 96dB at 20kHz
♦ Single-Supply Operation: +4.5V to +30V
Dual-Supply Operation: ±4.5V to ±20V
♦ Rail-to-Rail® Signal Handling
______________Ordering Information
PART
TEMP RANGE
MAX312CPE
0°C to +70°C
16 Plastic DIP
MAX312CSE
0°C to +70°C
16 Narrow SO
Test Equipment
Communication Systems
PBX, PABX Systems
PIN-PACKAGE
MAX312CUE
0°C to +70°C
16 TSSOP
MAX312C/D
0°C to +70°C
Dice*
MAX312EPE
-40°C to +85°C
16 Plastic DIP
MAX312ESE
-40°C to +85°C
16 Narrow SO
MAX312EUE
-40°C to +85°C
16 TSSOP
MAX312MJE
-55°C to +125°C
16 CERDIP**
Ordering Information continued at end of data sheet.
* Contact factory for dice specifications.
**Contact factory for availability.
Audio Signal Routing
Avionics
Sample-and-Hold Circuits
Data Acquisition Systems
Rail-to-Rail is a registered trademark of Nippon Motorola Ltd.
_____________________Pin Configurations/Functional Diagrams/Truth Tables
TOP VIEW
IN1 1
16 IN2
COM1 2
15 COM2
NC1 3
14 NC2
V- 4
13 V+
MAX312
GND 5
NC4 6
COM4
GND
NO4 6
9
DIP/SO/TSSOP
SO/MAX312
LOGIC
SWITCH
0
1
ON
OFF
IN3
15 COM2
14 NO2
V- 4
11 NC3
IN4 8
16 IN2
NO1 3
12 VL
10 COM3
7
IN1 1
COM1 2
13 V+
MAX313
5
GND
NO4 6
9
IN3
0
1
OFF
ON
14 NC2
13 V+
MAX314
5
12 VL
11 NC3
10 COM3
COM4 7
9
IN4 8
DIP/SO/TSSOP
MAX313
LOGIC
SWITCH
15 COM2
V- 4
11 NO3
IN4 8
16 IN2
NO1 3
12 VL
10 COM3
COM4 7
IN1 1
COM1 2
IN3
DIP/SO/TSSOP
LOGIC
MAX314
SWITCHES
1, 4
SWITCHES
2, 3
0
1
OFF
ON
ON
OFF
SWITCHES SHOWN FOR LOGIC "0" INPUT
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX312/MAX313/MAX314
General Description
Maxim’s MAX312/MAX313/MAX314 analog switches
feature low on-resistance (10Ω max) and 1.5Ω on-resistance matching between channels. These switches conduct equally well in either direction. They offer low
leakage over temperature (2.5nA at +85°C). Low power
consumption and ESD tolerance greater than 2000V per
Method 3015.7 are guaranteed.
The MAX312/MAX313/MAX314 are quad, singlepole/single-throw (SPST) analog switches. The MAX312
is normally closed (NC), and the MAX313 is normally
open (NO). The MAX314 has two NC switches and two
NO switches. All three devices operate from a single
supply of +4.5V to +30V or from dual supplies of ±4.5V
to ±20V.
ABSOLUTE MAXIMUM RATINGS
Voltages Referenced to GND
V+ ...........................................................................-0.3V to +44V
V- ............................................................................+0.3V to -44V
V+ to V-...................................................................-0.3V to +44V
VL .....................................................(GND - 0.3V) to (V+ + 0.3V)
All Other Pins (Note 1) ................................(V- - 2V) to (V+ + 2V)
or 30mA (whichever occurs first)
Continuous Current (COM_, NO_, NC_).........................±100mA
Peak Current (COM_, NO_, NC_) ...................................±300mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 10.53mW/°C above +70°C) ..........842mW
Narrow SO (derate 8.70mW/°C above +70°C) ............696mW
CERDIP (derate 10.00mW/°C above +70°C) ...............800mW
TSSOP (derate 6.7mW/°C above +70°C) ....................457mW
Operating Temperature Ranges
MAX31_C_ ..........................................................0°C to +70°C
MAX31_E_ .......................................................-40°C to +85°C
MAX31_M_.....................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Note 1: Signals on NC_, NO_, COM_, or IN_ exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to
maximum current rating.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = 15V, V- = -15V, VL = 5V, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
MIN
CONDITIONS
TYP
(Note 2)
MAX
UNITS
ANALOG SWITCH
On-Resistance
On-Resistance Match Between
Channels (Note 4)
On-Resistance Flatness
(Note 5)
Off Leakage Current
(NO_ or NC_)
(Note 6)
COM Off Leakage Current
(Note 6)
COM On Leakage Current
(Note 6)
2
VCOM_,
VNO_,
VNC_
(Note 3)
V-
RON
ICOM = 10mA,
VNO_ or VNC_ = ±10V
∆RON
ICOM = 10mA,
VNO_ or VNC_ = ±10V
ICOM = 10mA,
RFLAT(ON) VNO_ or VNC_ = -5V,
0V, 5V
INO
INC
INC(OFF)
ICOM(ON)
VCOM = ±10V,
VNO_ or VNC_ =
TA =
+25°C
C, E
V+
6.5
M
9
TA = TMIN to TMAX
Ω
15
TA = +25°C
0.3
TA = TMIN to TMAX
1.5
3
TA = +25°C
0.2
TA = TMIN to TMAX
2
4
-0.5
TA = TMIN C, E
to TMAX
M
-2.5
2.5
-40
40
TA = +25°C
-0.5
C, E
10V TA = TMIN
to TMAX
M
-2.5
2.5
-40
40
TA = +25°C
-1
TA = TMIN C, E
to TMAX
M
-5
5
-100
100
VCOM = ±10V,
VNO_ or VNC_ = ±10V
V
10
TA = +25°C
VCOM = 10V,
VNO_ or VNC_ = ±10V
±
Analog Signal Range
±
MAX312/MAX313/MAX314
10Ω, Quad, SPST, CMOS Analog Switches
-0.02
-0.02
-0.04
_______________________________________________________________________________________
Ω
Ω
0.5
nA
0.5
nA
1
nA
10Ω, Quad, SPST, CMOS Analog Switches
(V+ = 15V, V- = -15V, VL = 5V, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
(Note 2)
MAX
UNITS
LOGIC INPUT
Input Current with Input Voltage
High
IINH
IN_ = 2.4V, all others = 0.8V
-0.500
0.005
0.500
µA
Input Current with Input Voltage
Low
IINL
IN_ = 0.8V, all others = 2.4V
-0.500
0.005
0.500
µA
±20.0
V
POWER SUPPLY
Power-Supply Range
Positive Supply Current
Negative Supply Current
Logic Supply Current
Ground Current
±4.5
I+
I-
IL
IGND
All channels on or off,
VIN = 0V or 5V,
V+ = 16.5V
V- = -16.5V
All channels on or off,
VIN = 0V or 5V,
V+ = 16.5V
V- = -16.5V
All channels on or off,
VIN = 0V or 5V,
V+ = 16.5V
V- = -16.5V
All channels on or off,
VIN = 0V or 5V,
V+ = 16.5V
V- = -16.5V
TA = +25°C
-1
TA = TMIN to TMAX
-5
TA = +25°C
-1
TA = TMIN to TMAX
-5
TA = +25°C
-1
TA = TMIN to TMAX
-5
TA = +25°C
-1
TA = TMIN to TMAX
-5
0.0001
1
µA
5
0.0001
1
µA
5
0.0001
1
µA
5
-0.0001
1
µA
5
DYNAMIC
Turn-On Time
tON
Figure 2,
VCOM = ±10V
TA = +25°C
Turn-Off Time
tOFF
Figure 2,
VCOM = ±10V
TA = +25°C
Break-Before-Make Time Delay
tD
70
TA = TMIN to TMAX
65
TA = TMIN to TMAX
MAX314 only, Figure 3,
TA = +25°C
RL = 300Ω,
CL = 35pF
225
275
185
235
1
5
-30
20
ns
ns
ns
Charge Injection
(Note 3)
VCTE
CL = 1.0nF
VGEN = 0V,
RGEN = 0Ω, Figure 4
TA = +25°C
Off Isolation (Note 7)
VISO
RL = 50Ω,
CL = 5pF,
f = 1MHz, Figure 5
TA = +25°C
-65
dB
Crosstalk (Note 8)
VCT
RL = 50Ω,
CL = 5pF,
f = 1MHz, Figure 6
TA = +25°C
-85
dB
NC or NO Capacitance
C(OFF)
f = 1MHz, Figure 7
TA = +25°C
15
pF
COM Off Capacitance
C(COM)
f = 1MHz, Figure 7
TA = +25°C
15
pF
On Capacitance
C(COM)
f = 1MHz, Figure 7
TA = +25°C
47
pF
30
pC
_______________________________________________________________________________________
3
MAX312/MAX313/MAX314
ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)
MAX312/MAX313/MAX314
10Ω, Quad, SPST, CMOS Analog Switches
ELECTRICAL CHARACTERISTICS—Single Supply
(V+ = 12V, V- = 0V, VL = 5V, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
(Note 2)
MAX
UNITS
ANALOG SWITCH
Analog Signal Range
Channel On-Resistance
VCOM_,
VNO_,
VNC_
RON
(Note 3)
0
ICOM = 10mA,
VNC_ or VNO_ +10V
TA = +25°C
V+ = 13.2V
all channels on or off,
VIN = 0V or 5V
TA = +25°C
-1
TA = TMAX
-5
VL = 5.5V
all channels on or off,
VIN = 0V or 5V
TA = +25°C
-1
TA = TMAX
-5
VL = 5.5V
all channels on or off,
VIN = 0V or 5V
TA = +25°C
-1
TA = TMAX
-5
V+
12.5
TA = TMIN to TMAX
25
35
V
Ω
POWER SUPPLY
Positive Supply Current
Logic Supply Current
Ground Current
I+
IL
IGND
0.0001
1
µA
5
0.0001
1
µA
5
-0.0001
1
µA
5
DYNAMIC
Turn-On Time
(Note 3)
tON
Figure 2,
VNO_ or VNC_ = 8V
TA = +25°C
Turn-Off Time
(Note 3)
tOFF
Figure 2,
VNO_ or VNC_ = 8V
TA = +25°C
Break-Before-Make Time Delay
(Note 3)
Charge Injection
(Note 3)
tD
VCTE
100
TA = TMIN to TMAX
325
425
95
TA = TMIN to TMAX
175
225
ns
ns
MAX314 only, Figure 3
RL = 300Ω,
CL = 35pF
TA = +25°C
5
ns
Figure 4,
CL = 1.0nF,
VGEN = 0V,
RGEN = 0V
TA = +25°C
-5
pC
Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Note 3: Guaranteed by design.
Note 4: ∆RON = ∆RON max - ∆RON min.
Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal range.
Note 6: Leakage parameters are 100% tested at maximum-rated hot temperature and guaranteed by correlation at +25°C.
Note 7: Off isolation = 20log10 [VCOM / (VNC or VNO)], VCOM = output, VNC or VNO = input to off switch.
Note 8: Between any two switches.
Note 9: Leakage testing at single supply is guaranteed by testing with dual supplies.
4
_______________________________________________________________________________________
10Ω, Quad, SPST, CMOS Analog Switches
ON-RESISTANCE vs. VCOM AND
TEMPERATURE
A: TA = +125°C
B: TA = +85°C
C: TA = +70°C
D: TA = +25°C
E: TA = -55°C
12
A
13
11
100
A
8
C
B
C
D
B
C
6
A: V+ = 2.7V
B: V+ = 3.3V
C: V+ = 5V
D: V+ = 9V
E: V+ = 12V
F: V+ = 15V
A
10
B
9
1000
MAX312-03
14
RON (Ω)
RON (Ω)
15
V+ = 15V,
V+ = -15V
RON (Ω)
A: V+, V- = ±5V,
B: V+, V- = ±10V,
C: V+, V- = ±15V
17
16
MAX312-01
19
ON-RESISTANCE vs. VCOM
(SINGLE SUPPLY, V- = 0V)
MAX312-02
ON-RESISTANCE vs. VCOM
(BIPOLAR SUPPLIES)
E
F
10
D
7
4
5
2
E
10
1
-15
15
-10
-5
ON-RESISTANCE vs. VCOM AND
TEMPERATURE
MAX312-04
100
10
20
A: TA = +125°C
B: TA = +85°C
C: TA = +70°C
D: TA = +25°C
E: TA = -55°C
8
6
4
2
1
2 3
4 5
V+ = 15V,
V- = -15V,
VNC OR VNO = ±10V
VCOM = 10V
6 7
0.01
V+ = 15V,
V- = -15V,
VCOM = 10V
1
0.1
0.01
0.001
0.001
0.0001
0.0001
8 9 10 11 12
-50
-25
0
25
50
100
75
-50
125
-25
0
25
50
75
100
125
TEMPERATURE (°C)
TEMPERATURE (°C)
CHARGE INJECTION
vs. VCOM
30
10
0.1
VCOM (V)
40
100
1
SUPPLY CURRENT
vs. TEMPERATURE
100
MAX312-07
0
ON LEAKAGE CURRENT
vs. TEMPERATURE
A: V+ = 15V, V- = -15V
B: V+ = 12V, V- = 0V
MAX312 TOC08
10
VCOM (V)
ON LEAKAGE (nA)
C
D
E
12
OFF LEAKAGE (nA)
B
A: I+ = 16.5V
B: I- = -16.5V
10 C: IL = 5.5V
A
20
VCTE (pc)
RON (Ω)
16
14
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
±
A
18
15
OFF LEAKAGE CURRENT
vs. TEMPERATURE
V+ = 12V,
V- = 0V
22
10
VCOM (V)
VCOM (V)
24
5
0
MAX312 TOC06
5
0
MAX312 TOC05
-5
B
10
0
-10
I+, I-, IL (µA)
-10
±
-15
1
0.1
A
0.01
B
-20
C
0.001
-30
-40
-14 -12-10 -8 -6 -4 -2 0 2 4 6 8 10 12 14
VCOM (V)
0.0001
-75 -50 -25
0
25
50
75
100 125
TEMPERATURE (°C)
_______________________________________________________________________________________
5
MAX312/MAX313/MAX314
__________________________________________Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
____________________________Typical Operating Characteristics (continued)
(TA = +25°C, unless otherwise noted.)
TOTAL HARMONIC DISTORTION
vs. FREQUENCY
FREQUENCY RESPONSE
1
-60
.1
SIGNAL DISTORTION
.01
MEASUREMENT LIMITS
.001
LOSS (dB)
-40
-80
-10
10
DISTORTION (%)
-20
ON RESPONSE
OFF ISOLATION
-120
0
-30
-10
-20
-40
ON
PHASE
-50
100
1000
10000
-30
-40
2.5pF CAPACITOR
(FOR REFERENCE ONLY)
-50
-70
-60
-80
.0001
10
100000
10
-20
-60
-100
20
PHASE (degrees)
V+ = 15V
V- = -15V
5VRMS SIGNAL
600Ω SOURCE AND LOAD
0
100
MAX312-10
MAX312-09
0
DISTORTION (dB re carrier)
MAX312/MAX313/MAX314
10Ω, Quad, SPST, CMOS Analog Switches
1
10
FREQUENCY (Hz)
100
300
FREQUENCY (MHz)
______________________________________________________________Pin Description
PIN
NAME
6
FUNCTION
MAX312
MAX313
MAX314
1, 8,
9, 16
1, 8,
9, 16
1, 8,
9, 16
IN2, IN4,
IN3, IN2
2, 7,
10, 15
2, 7,
10, 15
2, 7,
10, 15
COM1, COM4,
COM3, COM2
3, 6,
11, 14
—
—
NC1, NC4,
NC3, NC2
Analog Signal Normally Closed Terminals
—
3, 6,
11, 14
—
NO1, NO4,
NO3, NO2
Analog Signal Normally Open Terminals
—
—
3, 6
NO1, NO4
Analog Signal Normally Open Terminals
—
—
11, 14
NC3, NC2
Analog Signal Normally Closed Terminals
4
4
4
V-
5
5
5
GND
12
12
12
VL
Logic Supply Voltage
13
13
13
V+
Positive Analog Supply Input
Logic Level Inputs
Analog Signal Common Terminals
Negative Analog Supply Input (connect to GND for single-supply operation)
Logic Level Ground
_______________________________________________________________________________________
10Ω, Quad, SPST, CMOS Analog Switches
Low-Distortion Audio
The MAX312/MAX313/MAX314, having very low RON
and very low RON variation with signal amplitude, are
well suited for low-distortion audio applications. The
Typical Operating Characteristics show Total Harmonic
Distortion (THD) vs. Frequency graphs for several signal amplitudes and impedances. Higher source and
load impedances improve THD, but reduce off isolation.
tors to a circuit board deemed “average”; that is,
designed with isolation in mind, but not using strip-line
or other special RF circuit techniques. For critical applications above 5MHz, use the MAX440, MAX441, and
MAX442, which are fully characterized up to 160MHz.
V+
Off Isolation at High Frequencies
In 50Ω systems, the high-frequency on-response of
these parts extends from DC to above 100MHz with a
typical loss of -2dB. When the switch is turned off, however, it behaves like a capacitor, and off isolation
decreases with increasing frequency. (Above 300MHz,
the switch actually passes more signal turned off than
turned on.) This effect is more pronounced with higher
source and load impedances.
Above 5MHz, circuit board layout becomes critical, and
it becomes difficult to characterize the response of the
switch independent of the circuit. The graphs shown in
the Typical Operating Characteristics were taken using
a 50Ω source and load connected with BNC connec-
V+
NO_
COM_
Vg
V-
V-
Figure 1. Overvoltage Protection Using External Blocking
Diodes
+5V
LOGIC
INPUT
t r < 20ns
t f < 20ns
+3V
50%
SWITCH V COM1
INPUT
0V
+15V
VL
COM1
VO
0.9V0
0.9V0
t ON
LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES
THAT HAVE THE OPPOSITE LOGIC SENSE.
LOGIC
INPUT
VO
RL
300Ω
IN1
0V
SWITCH
OUTPUT
V+
NO1
OR NC1
t OFF
SWITCH
OUTPUT
MAX312
MAX313
MAX314
GND
V-
0V
-15V
CL
35pF
REPEAT TEST FOR EACH SWITCH. FOR LOAD
CONDITIONS, SEE Electrical Characteristics.
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
RL
VO = VCOM
RL + RON
(
)
Figure 2. Switching-Time Test Circuit
_______________________________________________________________________________________
7
MAX312/MAX313/MAX314
__________Applications Information
MAX312/MAX313/MAX314
10Ω, Quad, SPST, CMOS Analog Switches
LOGIC
INPUT
50%
0V
SWITCH
OUTPUT 1
(VO1)
+5V
+15V
VL
COM_
V+
+3V
VCOM1 = +10V
VCOM2 = +10V
0.9V01
NO_
LOGIC
INPUT
0.9V02
0V
tD
GND
RL1
VO2
RL2
IN_
SWITCH
OUTPUT 2
(VO2)
VO1
NC_
COM_
0V
MAX314
CL2
V-15V
tD
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
RL = 300Ω
CL = 35pF
Figure 3. Break-Before-Make Test Circuit (MAX314 only)
MAX312
MAX313
MAX314
RGEN
+5V
+15V
VL
V+
∆VO
VO
COM
NC OR
NO
VO
VIN
CL
V GEN
GND
IN
OFF
V-
-15V
VIN = +3V
VIN
OFF
ON
ON
OFF
Q = (∆V O )(C L )
VIN DEPENDS ON SWITCH CONFIGURATION;
INPUT POLARITY DETERMINED BY SENSE OF SWITCH.
Figure 4. Charge Injection Test Circuit
8
OFF
_______________________________________________________________________________________
CL1
10Ω, Quad, SPST, CMOS Analog Switches
+15V
+5V
V+
VL
SIGNAL
GENERATOR 0dBm
MAX312
MAX313
MAX314
SIGNAL
GENERATOR 0dBm
COM
0V,
2.4V
IN
COM
ANALYZER
C
NC OR NO
V+
VL
N01
IN1
IN2
50Ω
0V, 2.4V
COM2
N02
V-
NC
C
RL
-15V
-15V
Figure 5. Off-Isolation Test Circuit
C
MAX312
MAX313
MAX314
COM1
GND
C
RL
+5V
0V, 2.4V
ANALYZER
V-
GND
+15V
MAX312/MAX313/MAX314
C
Figure 6. Crosstalk Test Circuit
+15V
+5V
V+
VL
MAX312
MAX313
MAX314
C
+15V
+5V
V+
VL
MAX312
MAX313
MAX314
COM
COM
CAPACITANCE
METER
IN
IN
0V or
2.4V
CAPACITANCE
METER
NC OR NO
NC OR NO
f = 1MHz
GND
0V or
2.4V
f = 1MHz
V-
-15V
Figure 7. Channel-Off Capacitance Test Circuit
C
GND
V-
C
-15V
Figure 8. Channel-On Capacitance Test Circuit
_______________________________________________________________________________________
9
MAX312/MAX313/MAX314
10Ω, Quad, SPST, CMOS Analog Switches
Ordering Information (continued)
PART
TEMP. RANGE
MAX313CPE
0°C to +70°C
16 Plastic DIP
MAX313CSE
0°C to +70°C
16 Narrow SO
MAX313CUE
MAX313C/D
MAX313EPE
MAX313ESE
MAX313EUE
MAX313MJE
MAX314CPE
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
0°C to +70°C
16 TSSOP
Dice*
16 Plastic DIP
16 Narrow SO
16 TSSOP
16 CERDIP**
16 Plastic DIP
MAX314CSE
0°C to +70°C
16 Narrow SO
MAX314CUE
MAX314C/D
MAX314EPE
MAX314ESE
MAX314EUE
MAX314MJE
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
16 TSSOP
Dice*
16 Plastic DIP
16 Narrow SO
16 TSSOP
16 CERDIP**
___________________Chip Topography
PIN-PACKAGE
COM1 IN1
IN2 COM2
A
D
V-
V+
GND
VL
B
0.140"
(3.56mm)
C
* Contact factory for dice specifications.
**Contact factory for availability.
COM4 IN4
IN3 COM3
0.085"
(2.16mm)
MAX312
MAX313
PIN
NAME
PIN
NAME
PIN
NAME
A
NC1
A
NO1
A
NO1
B
NC4
B
NO4
B
NO4
C
NC3
C
NO3
C
NC3
D
NC2
D
NO2
D
NC2
TRANSISTOR COUNT: 100
SUBSTRATE CONNECTED TO V+
10
MAX31
MAX314
______________________________________________________________________________________
10Ω, Quad, SPST, CMOS Analog Switches
TSSOP.EPS
PDIPN.EPS
______________________________________________________________________________________
11
MAX312/MAX313/MAX314
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
Package Information (continued)
CDIPS.EPS
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
DIM
A
A1
B
C
e
E
H
L
N
E
H
INCHES
MILLIMETERS
MAX
MIN
0.053
0.069
0.004
0.010
0.014
0.019
0.007
0.010
0.050 BSC
0.150
0.157
0.228
0.244
0.016
0.050
MAX
MIN
1.75
1.35
0.25
0.10
0.49
0.35
0.19
0.25
1.27 BSC
3.80
4.00
5.80
6.20
0.40
SOICN .EPS
MAX312/MAX313/MAX314
10Ω, Quad, SPST, CMOS Analog Switches
1.27
VARIATIONS:
1
INCHES
TOP VIEW
DIM
D
D
D
MIN
0.189
0.337
0.386
MAX
0.197
0.344
0.394
MILLIMETERS
MIN
4.80
8.55
9.80
MAX
5.00
8.75
10.00
N MS012
8
AA
14
AB
16
AC
D
A
B
e
C
0 -8
A1
L
FRONT VIEW
SIDE VIEW
PROPRIETARY INFORMATION
TITLE:
PACKAGE OUTLINE, .150" SOIC
APPROVAL
DOCUMENT CONTROL NO.
21-0041
REV.
B
1
1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2002 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
工商网监
湘ICP备2023018690号
