MAX3293–MAX3295
20Mbps, +3.3V, SOT23 RS-485/
RS-422 Transmitters
General Description
The MAX3293/MAX3294/MAX3295 low-power, highspeed transmitters for RS-485/RS-422 communication operate from a single +3.3V power supply.
These devices contain one differential transmitter.
The MAX3295 transmitter operates at data rates up
to 20Mbps, with an output skew of less than 5ns, and
a guaranteed driver propagation delay below 25ns.
The MAX3293 (250kbps) and MAX3294 (2.5Mbps) are
slew-rate limited to minimize EMI and reduce reflections
caused by improperly terminated cables.
The MAX3293/MAX3294/MAX3295 output level is guaranteed at +1.5V with a standard 54Ω load, compliant
with RS-485 specifications. The transmitter draws 5mA
of supply current when unloaded, and 1µA in low-power
shutdown mode (DE = GND).
Hot-swap circuitry eliminates false transitions on the data
cable during circuit initialization or connection to a live
backplane, and short-circuit current limiting and thermal-shutdown circuitry protect the driver against excessive power dissipation.
The MAX3293/MAX3294/MAX3295 are offered in a
6-pin SOT23 package, and are specified over the
automotive temperature range.
RS-485/RS-422 Communications
Clock Distribution
Telecom Equipment
Automotive
Security Equipment
Point-of-Sale Equipment
Industrial Control
●● 250kbps/2.5Mbps/20Mbps Data Rates Available
●● Operate from a Single +3.3V Supply
●● ESD Protection
±9kV–Human Body Model
●● Slew-Rate Limited for Errorless Data Transmission
(MAX3293/MAX3294)
●● 1µA Low-Current Shutdown Mode
●● -7V to +12V Common-Mode Input Voltage Range
●● Current Limiting and Thermal Shutdown for
Driver-Overload Protection
●● Hot-Swap Inputs for Telecom Applications
●● Automotive Temperature Range (-40°C to +125°C)
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
MAX3293AUT+T
-40°C to +125°C
6 SOT23-6
MAX3294AUT+T
-40°C to +125°C
6 SOT23-6
MAX3295AUT+T
-40°C to +125°C
6 SOT23-6
MAX3295AUT/V+T
-40°C to +125°C
6 SOT23-6
Selector Guide
MAXIMUM
DATA RATE
(Mbps)
SLEWRATE
LIMITED
TOP
MARK
MAX3293AUT+T
0.25
Yes
ABNI or
ABVH
MAX3294AUT+T
2.5
Yes
ABNJ or
ABVI
MAX3295AUT+T
20
No
ABNK or
ABVJ
MAX3295AUT/V+T
20
No
+ACSB
PART
Typical Operating Circuit
120Ω
DI
●● Space-Saving 6-Pin SOT23 Package
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
/V denotes automotive-qualified package.
Applications
●●
●●
●●
●●
●●
●●
●●
Features
Z
D
Y
R
DE
MAX3293
MAX3294
MAX3295
19-2770; Rev 4; 12/14
MAX3280E
MAX3281E
MAX3283E
MAX3284E
RO
Pin Configuration appears at end of data sheet.
MAX3293–MAX3295
20Mbps, +3.3V, SOT23 RS-485/
RS-422 Transmitters
Absolute Maximum Ratings
(All voltages referenced to GND, unless otherwise noted.)
Supply Voltage (VCC).............................................................+6V
DE, DI.......................................................................-0.3V to +6V
Y, Z.........................................................................-7V to +12.5V
Maximum Continuous Power Dissipation (TA = +70°C)
SOT23 (derate 8.2mW/°C above +70°C)..................654.1mW
Operating Temperature Ranges
MAX32_ _AUT............................................... -40°C to +125°C
Storage Temperature Range............................. -65°C to +160°C
Junction Temperature ......................................................+160°C
Lead Temperature (soldering, 10s).................................. +300°C
Soldering Temperature (reflow)........................................+260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Electrical Characteristics
(VCC = +3.3V ±5%, TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = +3.3V and TA = +25°C.) (Notes 1, 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
3.135
3.300
3.465
V
5
mA
10
µA
POWER SUPPLY
Supply Voltage
Supply Current in Normal
Operation
Supply Current in Shutdown Mode
VCC
IQ
ISHDN
No load, DI = VCC or GND, DE = VCC
No load, DE = GND
1
DRIVER
VOD
R = 50W (RS-422),
Figure 1, DE = VCC, TA ≤ +85°C
DI = GND or VCC
R = 27W (RS-485),
TA ≤ +85°C
Change in Magnitude of
Differential Output Voltage
∆VOD
Figure 1, R = 27W or 50W,
DE = VCC (Note 3)
Driver Common-Mode
Output Voltage
VOC
Figure 1, R = 27W or 50W,
DE = VCC, DI = VCC or GND
Differential Driver Output
Change in Magnitude of
Common-Mode Voltage
∆VOC
2.0
VCC
1.5
V
VCC
-1
Figure 1, R = 27W or 50W (Note 3)
0.2
V
+3
V
0.2
V
DRIVER LOGIC
Input High Voltage
VIH
DE, DI
Input Low Voltage
VIL
DE, DI
Input Current
IIN
DE, DI
IO
Y, Z
DE = GND,
VCC = GND or
+3.3V
Output Leakage
Driver Short-Circuit Foldback
Output Current
IOSFD
Driver Short-Circuit
Output Current
IOSD
2.0
V
0.8
V
-2
+2
µA
VIN = +12V
-20
+20
VIN = -7V
-20
+20
(VCC - 1V) ≤ VOUT ≤ +12V, output high
µA
+25
-7V ≤ VOUT ≤ 1V, output high
0 ≤ VOUT ≤ +12V, output low
-25
-250
-7V ≤ VOUT ≤ VCC, output high
+250
mA
mA
Thermal-Shutdown Threshold
TTS
160
°C
Thermal-Shutdown Hysteresis
TTSH
40
°C
±9
kV
ESD Protection
www.maximintegrated.com
Y, Z
Human Body Model
Maxim Integrated │ 2
MAX3293–MAX3295
20Mbps, +3.3V, SOT23 RS-485/
RS-422 Transmitters
Switching Characteristics (MAX3293)
(VCC = +3.3V ±5%, TA = +25°C, unless otherwise noted. Typical values are at VCC = +3.3V.)
PARAMETER
Driver Propagation Delay
Driver Differential Output Rise
or Fall Time
Driver-Output Skew
Differential Driver-Output Skew
SYMBOL
tPLH
tPHL
tR
tF
CONDITIONS
MIN
TYP
MAX
Figures 2, 3; RDIFF = 54W,
CL = 50pF
400
1300
400
1300
Figures 2, 3; RDIFF = 54W,
CL = 50pF
400
1200
400
1200
UNITS
ns
ns
tSKEW
Figures 2, 3; RDIFF = 54W, CL = 50pF,
tSKEW = | tPLH - tPHL | (Note 5)
-400
+400
ns
tDSKEW
Figures 2, 3; RDIFF = 54W, CL = 50pF
-100
+100
ns
Figures 2, 3; RDIFF = 54W, CL = 50pF
250
Maximum Data Rate
kbps
Driver Enable to Output High
tZH
Figures 4, 5; S2 closed, RL = 500W,
CL = 100pF
2000
ns
Driver Enable to Output Low
tZL
Figures 4, 5; S1 closed, RL = 500W,
CL = 100pF
2000
ns
Driver Disable Time from Low
tLZ
Figures 4, 5; S1 closed, RL = 500W,
CL = 100pF
1000
ns
Driver Disable Time from High
tHZ
Figures 4, 5; S2 closed, RL = 500W,
CL = 100pF
1000
ns
Same power supply, maximum temperature
difference between devices = +30°C (Note 5)
900
ns
MAX
UNITS
Device-to-Device Propagation
Delay Matching
Switching Characteristics (MAX3294)
(VCC = +3.3V ±5%, TA = +25°C, unless otherwise noted. Typical values are at VCC = +3.3V.)
PARAMETER
Driver Propagation Delay
Driver Differential Output Rise or
Fall Time
SYMBOL
CONDITIONS
MIN
TYP
tPLH
24
70
tPHL
Figures 2, 3; RDIFF = 54W,
CL = 50pF
24
70
tR
10
70
tF
Figures 2, 3; RDIFF = 54W,
CL = 50pF
10
70
ns
ns
tSKEW
Figures 2, 3; RDIFF = 54W, CL = 50pF,
tSKEW = | tPLH - tPHL | (Note 5)
-40
+40
ns
tDSKEW
Figures 2, 3; RDIFF = 54W, CL = 50pF
-6
+6
ns
Maximum Data Rate
Figures 2, 3; RDIFF = 54W, CL = 50pF
2.5
Driver Enable to Output High
tZH
Figures 4, 5; S2 closed, RL = 500W,
CL = 100pF
400
ns
Driver Enable to Output Low
tZL
Figures 4, 5; S1 closed, RL = 500W,
CL = 100pF
400
ns
Driver Disable Time from Low
tLZ
Figures 4, 5; S1 closed, RL = 500W,
CL = 100pF
100
ns
Driver Disable Time from High
tHZ
Figures 4, 5; S2 closed, RL = 500W,
CL = 100pF
100
ns
Same power supply, maximum temperature
difference between devices = +30°C (Note 5)
46
ns
Driver-Output Skew
Differential Driver-Output Skew
Device-to-Device Propagation
Delay Matching
www.maximintegrated.com
Mbps
Maxim Integrated │ 3
MAX3293–MAX3295
20Mbps, +3.3V, SOT23 RS-485/
RS-422 Transmitters
Switching Characteristics (MAX3295)
(VCC = +3.3V ±5%, TA = +25°C, unless otherwise noted. Typical values are at VCC = +3.3V.)
PARAMETER
Driver Propagation Delay
Driver Differential Output Rise
or Fall Time
Driver-Output Skew
Differential Driver-Output Skew
SYMBOL
tPLH
tPHL
tR
tF
CONDITIONS
MIN
TYP
25
Figures 2, 3; RDIFF = 54W, CL = 50pF
Figures 2, 3;
RDIFF = 54W,
CL = 50pF
MAX
25
TA = -40°C to +125°C
UNITS
ns
18.5
TA < +85°C
15
TA = -40°C to +125°C
18.5
TA < +85°C
ns
15
tSKEW
Figures 2, 3; RDIFF = 54W, CL = 50pF,
tSKEW = | tPLH - tPHL |
5
ns
tDSKEW
Figures 2, 3; RDIFF = 54W, CL = 50pF
5
ns
Maximum Data Rate
Figures 2, 3; RDIFF = 54W, CL = 50pF,
TA ≤ +85°C
20
Figures 2, 3; RDIFF = 54W, CL = 50pF
16
Mbps
Driver Enable to Output High
tZH
Figures 4, 5; S2 closed, RL = 500W,
CL = 100pF
400
ns
Driver Enable to Output Low
tZL
Figures 4, 5; S1 closed, RL = 500W,
CL = 100pF
400
ns
Driver Disable Time from Low
tLZ
Figures 4, 5; S1 closed, RL = 500W,
CL = 100pF
100
ns
Driver Disable Time from High
tHZ
Figures 4, 5; S2 closed, RL = 500W,
CL = 100pF
100
ns
Device-to-Device Propagation
Same power supply, maximum temperature
25
ns
Delay Matching
difference between devices = +30°C (Note 5)
Note 1: Devices production tested at +25°C. Limits over the operating temperature range are guaranteed by design.
Note 2: All currents into the device are positive; all currents out of the device are negative. All voltages are referenced to device
ground, unless otherwise noted.
Note 3: ∆VOD and ∆VOC are the changes in VOD and VOC, respectively, when the DI input changes state.
Note 4: The maximum current applies to peak current just prior to foldback current limiting.
Note 5: Guaranteed by design; not production tested.
www.maximintegrated.com
Maxim Integrated │ 4
MAX3293–MAX3295
20Mbps, +3.3V, SOT23 RS-485/
RS-422 Transmitters
Test Circuits and Timing Diagrams
Y
R
OUTPUT
UNDER TEST
VOD
R
CL
VOC
S2
Z
Figure 1. Driver DC Test Load
Figure 4. Enable/Disable Timing Test Load
DE
3V
DE
DI
3V
0V
Y
VID
CL
RDIFF
Z
Y, Z
VOL
CL
1.5V
1.5V
tZL(SHDN), tZL
0V
3V
0V
Z
Y
VOL+ 0.25V
OUTPUT NORMALLY HIGH
2.3V
tZH(SHDN), tZH
Figure 2. Driver Timing Test Circuit
tLZ
2.3V OUTPUT NORMALLY LOW
Y, Z
DI
VCC
S1
RL
VOH- 0.25V
tHZ
Figure 5. Driver Enable and Disable Times
f = 1MHz, tR 3ns, tF 3ns
1.5V
1.5V
tPLH
tPHL
1/2 VO
VO
1/2 VO
VO
VDIFF 0V
-VO
VDIFF = V (Y) - V (Z)
90%
90%
10%
10%
tR
tF
tSKEW = | tPLH - tPHL |
Figure 3. Driver Propagation Delays
www.maximintegrated.com
Maxim Integrated │ 5
MAX3293–MAX3295
20Mbps, +3.3V, SOT23 RS-485/
RS-422 Transmitters
Typical Operating Characteristics
(VCC = +3.3V, TA = +25°C, unless otherwise noted.)
TA = +25C
TA = -40C
0
0
5
10
15
0.5
0
20
-40
-10
DATA RATE (Mbps)
20
10
2.25 2.50 2.75
3.00 3.25
3.50
3.0
RDIFF = 100Ω
2.5
2.0
RDIFF = 54Ω
140
DRIVER-OUTPUT CURRENT
vs. DRIVER-OUTPUT HIGH VOLTAGE
-40
-10
20
50
80
-80
110
80
60
40
0
110
0
2
2
1
4
6
8
10
OUTPUT LOW VOLTAGE (V)
12
DRIVER PROPAGATION DELAY
vs. TEMPERATURE
MAX3293-95 toc08
3
OUTPUT SKEW (ns)
-60
80
20
4
MAX3293-95 toc07
-40
50
100
OUTPUT SKEW vs. TEMPERATURE
-20
20
120
1.5
1.0
MAX3293-95 toc03
-10
DRIVER-OUTPUT CURRENT
vs. DRIVER-OUTPUT LOW VOLTAGE
TEMPERATURE (C)
0
OUTPUT CURRENT (mA)
-40
TEMPERATURE (C)
3.5
DIFFERENTIAL OUTPUT VOLTAGE (V)
20
0.4
0
110
MAX3293-95 toc05
MAX3293-95 toc04
30
1.75 2.00
80
DRIVER DIFFERENTIAL OUTPUT VOLTAGE
vs. TEMPERATURE
DIFFERENTIAL OUTPUT VOLTAGE (V)
OUTPUT CURRENT (mA)
40
0
50
0.8
TEMPERATURE (C)
OUTPUT CURRENT
vs. DIFFERENTIAL OUTPUT VOLTAGE
50
20
1.2
MAX3293-95 toc06
5
1.0
DE = GND
1.6
OUTPUT CURRENT (mA)
10
1.5
2.0
SUPPLY CURRENT (µA)
15
DE = VCC
NO LOAD
NO SWITCHING
40
PROPAGATION DELAY (ns)
SUPPLY CURRENT (mA)
SUPPLY CURRENT (mA)
TA = +85C
TA = +125C
MAX3293-95 toc02
DE = VCC
NO LOAD
20
2.0
MAX3293-95 toc01
25
SHUTDOWN SUPPLY CURRENT
vs. TEMPERATURE
SUPPLY CURRENT vs. TEMPERATURE
MAX3293-95 toc09
MAX3295
SUPPLY CURRENT vs. DATA RATE
RDIFF = 54Ω
CL = 50pF
30
tPHL
20
tPLH
10
-100
-120
-7
-5
-3
-1
1
3
OUTPUT HIGH VOLTAGE (V)
www.maximintegrated.com
5
0
-40
-10
20
50
80
TEMPERATURE (C)
110
0
-40
-10
20
50
80
110
TEMPERATURE (C)
Maxim Integrated │ 6
MAX3293–MAX3295
20Mbps, +3.3V, SOT23 RS-485/
RS-422 Transmitters
Typical Operating Characteristics (continued)
(VCC = +3.3V, TA = +25°C, unless otherwise noted.)
DRIVER PROPAGATION DELAY
UNLOADED DRIVER-OUTPUT
WAVEFORM (fIN = 16Mbps)
ENABLE RESPONSE TIME
MAX3293-95 toc10
MAX3293-95 toc12
MAX3293-95 toc11
DI
DE
0V
0V
Y-Z
0V
Y, Z
Y, Z
0V
0V
Y, Z: 1V/div
DI: 2V/div
20ns/div
40ns/div
LOADED DRIVER-OUTPUT WAVEFORM
(fIN = 16Mbps)
EYE DIAGRAM (fIN = 20Mbps)
MAX3293-95 toc13
MAX3293-95 toc14
Y, Z
Y, Z
0V
0V
Y, Z: 500mV/div
20ns/div
20ns/div
Y, Z: 1V/div
Y, Z, DE: 2V/div
Y, Z: 500mV/div
10ns/div
Pin Description
PIN
NAME
FUNCTION
1
DI
Driver Input. A logic low on DI forces the noninverting output (Y) low and the inverting output (Z) high.
A logic high on DI forces the noninverting output (Y) high and the inverting output (Z) low.
2
VCC
3
DE
4
Z
5
GND
6
Y
www.maximintegrated.com
Positive Supply. VCC = +3.3V ±5%. Bypass VCC to GND with a 0.1µF capacitor.
Driver Output Enable. Force DE high to enable driver. Pull DE low to disable the driver. Hot-swap
input, see the Hot-Swap Capability section.
Inverting RS-485/RS-422 Output
Ground
Noninverting RS-485/RS-422 Output
Maxim Integrated │ 7
MAX3293–MAX3295
20Mbps, +3.3V, SOT23 RS-485/
RS-422 Transmitters
Detailed Description
The MAX3293/MAX3294/MAX3295 are low-power transmitters for RS-485/RS-422 communication. The MAX3295
operates at data rates up to 20Mbps, the MAX3294 up
to 2.5Mbps (slew-rate limited), and the MAX3293 up to
250kbps (slew-rate limited). These devices are enabled
using an active-high driver enable (DE) input. When
disabled, outputs enter a high-impedance state, and the
supply current reduces to 1µA.
cause coupling of VCC or GND to DE. These factors could
improperly enable the driver.
The MAX3293/MAX3294/MAX3295 eliminate all above
issues with hot-swap circuitry. When VCC rises, an internal pulldown circuit holds DE low for approximately 10µs.
After the initial power-up sequence, the pulldown circuit
becomes transparent, resetting the hot-swap tolerable
input.
The MAX3293/MAX3294/MAX3295 have a hot-swap input
structure that prevents disturbance on the differential signal
lines when a circuit board is plugged into a “hot” backplane (see the Hot-Swap Capability section). Drivers are
also short-circuit current limited and are protected against
excessive power dissipation by thermal-shutdown circuitry.
VCC
10µs
TIMER
Driver
The driver accepts a single-ended, logic-level input
(DI) and translates it to a differential RS-485/RS-422
level output (Y and Z). Driving DE high enables the
driver, while pulling DE low places the driver outputs
(Y and Z) into a high-impedance state (see Table 1).
Low-Power Shutdown
Force DE low to disable the MAX3293/MAX3294/
MAX3295. In shutdown mode, the device consumes a
maximum of 10µA of supply current.
TIMER
5.6kΩ
EN
DE
(HOT SWAP)
2mA
100µA
M1
Hot-Swap Capability
M2
Hot-Swap Input
When circuit boards are inserted into a “hot” or powered backplane, disturbances to the enable can lead
to data errors. Upon initial circuit board insertion, the
processor undergoes its power-up sequence. During
this period, the output drivers are high impedance
and are unable to drive the DE input of the MAX3293/
MAX3294/MAX3295 to a defined logic level. Leakage
currents up to 10µA from the high-impedance output could cause DE to drift to an incorrect logic state.
Additionally, parasitic circuit board capacitance could
Table 1. MAX3293/MAX3294/
MAX3295 (RS-485/RS-422) Transmitting
Function Table
INPUTS
OUTPUTS
DE
DI
Y
Z
0
X
Shutdown
Shutdown
1
0
0
1
1
X = Don’t care.
1
1
0
www.maximintegrated.com
Figure 6. Simplified Structure of the Driver Enable Input (DE)
DIFFERENTIAL POWER-UP GLITCH
(0.1V/µs)
2V/div
VCC
0V
Y
10mV/div
AC-COUPLED
Z
10mV/div
AC-COUPLED
20mV/div
Y-Z
4µs/div
Figure 7. Differential Power-Up Glitch (0.1V/µs)
Maxim Integrated │ 8
MAX3293–MAX3295
20Mbps, +3.3V, SOT23 RS-485/
RS-422 Transmitters
Hot-Swap Input Circuitry
The MAX3293/MAX3294/MAX3295 enable input features hot-swap capability. At the input, there are two
NMOS devices, M1 and M2 (Figure 6). When VCC
ramps from zero, an internal 10µs timer turns on
M2 and sets the SR latch, which also turns on M1.
Transistors M2, a 2mA current sink, and M1, a 100µA
current sink, pull DE to GND through a 5.6kΩ resistor.
M2 is designed to pull DE to the disabled state against
an external parasitic capacitance up to 100pF that may
drive DE high. After 10µs, the timer deactivates M2
while M1 remains on, holding DE low against threestate leakages that can drive DE high. M1 remains on
until an external source overcomes the required input
current. At this time, the SR latch resets and M1 turns
DIFFERENTIAL POWER-UP GLITCH
(1V/µs)
2V/div
VCC
off. When M1 turns off, DE reverts to a standard,
high-impedance CMOS input. Whenever VCC drops
below 1V, the hot-swap input is reset.
Hot-Swap Line Transient
During a hot-swap event when the driver is connected to
the line and is powered up, the driver must not cause the
differential signal to drop below 200mV. Figures 7, 8, and
9 show the results of the MAX3295 during power-up for
three different VCC ramp rates (0.1V/µs, 1V/µs, and 10V/
µs). The photos show the VCC ramp, the single-ended
signal on each side of the 100Ω termination, as well as
the differential signal across the termination.
ESD Protection
Human Body Model
Figure 10 shows the Human Body Model, and Figure 11
shows the current waveform it generates when discharged
into low impedance. This model consists of a 100pF capacitor charged to the ESD voltage of interest, which is then
discharged into the device through a 1.5kΩ resistor.
0V
100mV/div
AC-COUPLED
Y
RC
1MΩ
100mV/div
AC-COUPLED
Z
RD
1.5kΩ
CHARGE-CURRENT- DISCHARGE
RESISTANCE
LIMIT RESISTOR
200mV/div
Y-Z
1µs/div
HIGHVOLTAGE
DC
SOURCE
Cs
100pF
DEVICE
UNDER
TEST
STORAGE
CAPACITOR
Figure 8. Differential Power-Up Glitch (1V/µs)
Figure 10. Human Body ESD Test
DIFFERENTIAL POWER-UP GLITCH
(10V/µs)
2V/div
VCC
0V
Y
50mV/div
AC-COUPLED
Z
50mV/div
AC-COUPLED
Y-Z
100mV/div
200ns/div
Ir
IP 100%
90%
PEAK-TO-PEAK RINGING
(NOT DRAWN TO SCALE)
AMPERES
36.8%
10%
0V
0V
TIME
tRL
tDL
CURRENT WAVEFORM
Figure 11. Current Waveform
Figure 9. Differential Power-Up Glitch (10V/µs)
www.maximintegrated.com
Maxim Integrated │ 9
MAX3293–MAX3295
20Mbps, +3.3V, SOT23 RS-485/
RS-422 Transmitters
Reduced EMI and Reflections
(MAX3293/MAX3294)
Driver-Output Protection
The MAX3293/MAX3294 are slew-rate limited, minimizing
EMI and reducing reflections caused by improperly terminated cables. Figure 12 shows Fourier analysis of the
MAX3295 transmitting a 125kHz signal. High-frequency
harmonics with large amplitudes are evident. Figure 13
shows the same information, but for the slew-rate-limited
MAX3293, transmitting the same signal. The high-frequency harmonics have much lower amplitudes, and the
potential for EMI is significantly reduced.
To minimize reflections, the line should be terminated at
both ends in its characteristic impedance, and stub lengths
off the main line should be kept as short as possible. The
slew-rate-limited MAX3293 and MAX3294 are more tolerant of imperfect termination.
Two mechanisms prevent excessive output current and
power dissipation caused by faults or by bus contention.
The first, a foldback current limit on the output stage,
provides immediate protection against short circuits over
the whole common-mode voltage range (see the Typical
Operating Characteristics). The second, a thermal-shutdown circuit, forces the driver outputs into a high-impedance state if the die temperature exceeds +160°C.
Chip Information
PROCESS: BiCMOS
DRIVER-OUTPUT WAVEFORM AND
FFT PLOT OF MAX3295
DRIVER-OUTPUT WAVEFORM AND
FFT PLOT OF MAX3293
10dB/div
10dB/div
Figure 12. Driver-Output Waveform and FFT Plot of MAX3295
Transmitting a 125kHz Signal
Figure 13. Driver-Output Waveform and FFT Plot of MAX3293
Transmitting a 125kHz Signal
Pin Configuration
Package Information
TOP VIEW
DI 1
VCC 2
+
MAX3293
MAX3294
MAX3295
DE 3
SOT23-6
www.maximintegrated.com
6
Y
5
GND
4
Z
For the latest package outline information and land patterns
(footprints), go to www.maximintegrated.com/packages. Note
that a “+”, “#”, or “-” in the package code indicates RoHS status
only. Package drawings may show a different suffix character, but
the drawing pertains to the package regardless of RoHS status.
PACKAGE
TYPE
PACKAGE
CODE
OUTLINE
NO.
LAND
PATTERN NO.
6 SOT23
U6CN+2
21-0058
90-0175
Maxim Integrated │ 10
MAX3293–MAX3295
20Mbps, +3.3V, SOT23 RS-485/
RS-422 Transmitters
Revision History
REVISION
NUMBER
REVISION
DATE
PAGES
CHANGED
3
3/11
Added lead-free parts to the Ordering Information and Selector Guide tables
1
4
12/14
Added MAX3295AUT/V+T to Ordering Information
1
DESCRIPTION
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits)
shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
© 2014 Maxim Integrated Products, Inc. │ 11
工商网监
湘ICP备2023018690号
