0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
MAX339CSE

MAX339CSE

  • 厂商:

    AD(亚德诺)

  • 封装:

    SOIC16

  • 描述:

    IC MUX 8CH DUAL 4CH SOIC

  • 详情介绍
  • 数据手册
  • 价格&库存
MAX339CSE 数据手册
19-0272; Rev 3; 11/04 8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers The MAX338/MAX339 are monolithic, CMOS analog multiplexers (muxes). The 8-channel MAX338 is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual, 4channel MAX339 is designed to connect one of four inputs to a common output by control of a 2-bit binary address. Both devices can be used as either a mux or a demux. On-resistance is 400Ω max, and the devices conduct current equally well in both directions. These muxes feature extremely low off leakages (less than 20pA at +25°C), and extremely low on-channel leakages (less than 50pA at +25°C). The new design offers guaranteed low charge injection (1.5pC typ) and electrostatic discharge (ESD) protection greater than 2000V, per method 3015.7. These improved muxes are pin-compatible upgrades for the industry-standard DG508A and DG509A. For similar Maxim devices with lower leakage and charge injection but higher on-resistance, see the MAX328 and MAX329. The MAX338/MAX339 operate from a single +4.5V to +30V supply or from dual supplies of ±4.5V to ±20V. All control inputs (whether address or enable) are TTL compatible (+0.8V to +2.4V) over the full specified temperature range and over the ±4.5V to ±18V supply range. These parts are fabricated with Maxim’s 44V silicon-gate process. ________________________Applications Data-Acquisition Systems Sample-and-Hold Circuits Test Equipment Heads-Up Displays Military Radios Communications Systems Guidance and Control Systems PBX, PABX ____________________________Features ♦ On-Resistance,
MAX339CSE
物料型号:MAX338/MAX339

器件简介:MAX338/MAX339是单片CMOS模拟多路复用器,MAX338为8通道,MAX339为双4通道。它们可以将多个输入信号中的一个连接到一个公共输出,通过3位或2位二进制地址进行控制。

引脚分配:MAX338有16个引脚,包括地址输入A0-A2,使能输入EN,模拟输入NO1-NO8,公共输出COM,电源V+和地GND。MAX339的引脚分配类似,但有额外的双通道模拟输出。

参数特性:具有最大400Ω的导通电阻,非常低的漏电流(关断时小于20pA,开启时小于50pA),保证的低电荷注入(典型值1.5pC)和ESD保护大于2000V。

功能详解:这些多路复用器可以作为复用器或解复用器使用,支持单电源(+4.5V至+30V)或双电源(±4.5V至±20V)操作,所有控制输入与TTL兼容。

应用信息:适用于采样保持电路、抬头显示、通信系统、PBX、PABX、数据采集系统、测试设备、军事无线电、制导和控制系统等。

封装信息:提供多种封装选项,包括塑料DIP、窄体SOIC、薄型QFN等,适用于不同的工作温度范围。

电气特性:详细列出了在双电源和单电源条件下的电气参数,如开关的模拟信号范围、导通电阻、漏电流、输入电流、供电电流、动态转换时间、使能开关时间、电荷注入、关断隔离、串扰、逻辑输入电容、关断电容等。

典型操作特性:提供了在+25°C环境下的典型导通电阻与VCOM的关系图、漏电流与温度的关系图、关断隔离与温度的关系图、转换时间与电源电压的关系图、电荷注入与VCOM的关系图、供电电流与温度的关系图等。

引脚配置/功能图/真值表:提供了详细的引脚配置图和逻辑真值表,展示了不同地址和使能信号下的通道选择情况。

芯片拓扑图和封装信息:展示了芯片的内部结构和引脚分布,以及不同封装的详细图纸和尺寸。
MAX339CSE 价格&库存

很抱歉,暂时无法提供与“MAX339CSE”相匹配的价格&库存,您可以联系我们找货

免费人工找货