MAX4051CPE

19-0463; Rev 2; 10/05 Low-Voltage, CMOS Analog Multiplexers/Switches ____________________________Features ♦ Pin Compatible with Industry-Standard 74HC4051/74HC4052/74HC4053 The MAX4051/MAX4052/MAX4053 and MAX4051A/ MAX4052A/MAX4053A are low-voltage, CMOS analog ICs configured as an 8-channel multiplexer (MAX4051/A), two 4-channel multiplexers (MAX4052/A), and three single-pole/double-throw (SPDT) switches (MAX4053/A). The A-suffix parts are fully characterized for on-resistance match, on-resistance flatness, and low leakage. ♦ Guaranteed On-Resistance: 100Ω with ±5V Supplies ♦ Guaranteed Match Between Channels: 6Ω (MAX4051A–MAX4053A) 12Ω (MAX4051–MAX4053) These CMOS devices can operate continuously with dual power supplies ranging from ±2.7V to ±8V or a single supply between +2.7V and +16V. Each switch can handle rail-to-rail analog signals. The off-leakage current is only 0.1nA at +25°C or 5nA at +85°C (MAX4051A/MAX4052A/MAX4053A). ♦ Guaranteed Low Off-Leakage Currents: 0.1nA at +25°C (MAX4051A–MAX4053A) 1nA at +25°C (MAX4051–MAX4053) ♦ Guaranteed Low On-Leakage Currents: 0.1nA at +25°C (MAX4051A–MAX4053A) 1nA at +25°C (MAX4051–MAX4053) All digital inputs have 0.8V to 2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility when using ±5V or a single +5V supply. ♦ Single-Supply Operation from +2.0V to +16V Dual-Supply Operation from ±2.7V to ±8V ♦ TTL/CMOS-Logic Compatible ________________________Applications ♦ Low Distortion: < 0.04% (600Ω) Battery-Operated Equipment ♦ Low Crosstalk: < -90dB (50Ω) Audio and Video Signal Routing ♦ High Off-Isolation: < -90dB (50Ω) Low-Voltage Data-Acquisition Systems Ordering Information Communications Circuits PART TEMP RANGE PIN-PACKAGE MAX4051ACPE 0°C to +70°C 16 Plastic DIP MAX4051ACSE MAX4051ACEE 0°C to +70°C 0°C to +70°C 16 Narrow SO 16 QSOP Ordering Information continued at end of data sheet. ___________________________________Pin Configurations/Functional Diagrams TOP VIEW MAX4052 MAX4051 NO4 1 16 V+ NO6 2 MAX4053 NO0B 1 16 V+ NOB 1 16 V+ 15 NO2 NO2B 2 15 NO2A NCB 2 15 COMB COM 3 14 NO1 COMB 3 14 NO1A NOA 3 14 COMC NO7 4 13 NO0 NO3B 4 13 COMA COMA 4 13 NOC NO5 5 12 NO3 NO1B 5 12 NO0A NCA 5 12 NCC 11 ADDA INH 6 11 NO3A INH 6 11 ADDC 10 ADDB V- 7 10 ADDA V- 7 10 ADDB INH 6 V- 7 LOGIC GND 8 9 DIP/SO/QSOP ADDC LOGIC GND 8 9 DIP/SO/QSOP ADDB GND 8 9 ADDA DIP/SO/QSOP ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. 1 MAX4051/A, MAX4052/A, MAX4053/A General Description MAX4051/A, MAX4052/A, MAX4053/A Low-Voltage, CMOS Analog Multiplexers/Switches ABSOLUTE MAXIMUM RATINGS Voltages Referenced to GND V+ ........................................................................-0.3V to +17V V-..........................................................................+0.3V to -17V V+ to V- ................................................................-0.3V to +17V Voltage into Any Terminal (Note 1) ..........(V- - 2V) to (V+ + 2V) or 30mA (whichever occurs first) Continuous Current into Any Terminal..............................±30mA Peak Current, NO or COM (pulsed at 1ms, 10% duty cycle) .................................±100mA Continuous Power Dissipation (TA = +70°C) Plastic DIP (derate 10.53mW/°C above +70°C)............842mW Narrow SO (derate 8.70mW/°C above +70°C)..............696mW QSOP (derate 8.00mW/°C above +70°C) .....................640mW CERDIP (derate 10.00mW/°C above +70°C) ................800mW Operating Temperature Ranges MAX405_C_ E/MAX405_AC_E .............................0°C to +70°C MAX405_E_ E/MAX405_AE_E...........................-40°C to +85°C MAX405_MJE/MAX405_AMJE ........................-55°C to +125°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Note 1: Signals on any terminal exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maximum current rating. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS—Dual Supplies (V+ = +4.5V to +5.5V, V- = -4.5V to -5.5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER SYMBOL MIN CONDITIONS TYP MAX (Note 2) UNITS ANALOG SWITCH Analog Signal Range COM–NO On-Resistance COM–NO On-Resistance Match Between Channels (Note 3) COM–NO On-Resistance Flatness (Note 4) NO Off-Leakage Current (Note 5) 2 VCOM, VNO RON ∆RON RFLAT(ON) C, E, M V+ = 5V, V- = -5V, INO = 1mA, VCOM = ±3V V+ = 5V, V- = -5V, INO = 1mA, VCOM = ±3V V+ 60 C, E, M MAX4051, MAX4052, MAX4053 100 125 MAX4051A, TA = +25°C MAX4052A, MAX4053A C, E, M Ω C, E, M 18 V+ = 5.5V, V- = -5.5V, VNO = 4.5V, VCOM = -4.5V MAX4051, MAX4052, MAX4053 V+ = 5.5V, V- = -5.5V, VNO = -4.5V, VCOM = 4.5V MAX4051A, TA = +25°C MAX4052A, C, E MAX4053A M Ω 12 12 MAX4051A, TA = +25°C MAX4052A, MAX4053A C, E, M V 6 TA = +25°C V+ = 5V, V- = -5V, INO = 1mA, VCOM = -3V, 0V, 3V INO(OFF) V- TA = +25°C 10 Ω 15 TA = +25°C -1 C, E -10 10 M -100 100 -0.1 0.002 0.002 1 0.1 -5 5 -100 100 _______________________________________________________________________________________ nA Low-Voltage, CMOS Analog Multiplexers/Switches (V+ = +4.5V to +5.5V, V- = -4.5V to -5.5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER SYMBOL MIN CONDITIONS TA = +25°C MAX4051A C, E M TA = +25°C MAX4051 V+ = 5.5V, V- = -5.5V, VNO = 4.5V, VCOM = -4.5V COM Off-Leakage Current (Note 5) ICOM(OFF) MAX4051A MAX4051A COM On-Leakage Current (Note 5) ICOM(ON) V+ = 5.5V, V- = -5.5V, VCOM = VNO = ±4.5V 10 -0.1 0.002 -2.5 0.1 2.5 -100 100 TA = +25°C -1 C, E -5 5 M -50 50 TA = +25°C -0.1 C, E 0.002 0.002 1 0.1 -5 5 -100 100 -1 0.002 -10 10 M -100 100 -0.1 0.002 -2.5 0.1 2.5 -50 50 TA = +25°C -1 C, E -5 5 M -50 50 TA = +25°C -0.1 C, E 0.002 0.002 1 0.1 -5 5 -100 100 TA = +25°C -1 C, E -10 M -100 TA = +25°C -0.1 nA 1 C, E MAX4052A, C, E MAX4053A M MAX4052, MAX4053 1 100 M MAX4051 0.002 -10 TA = +25°C MAX4052A, C, E MAX4053A M MAX4052, MAX4053 100 -100 TA = +25°C MAX4051 5 -100 -1 UNITS 0.1 M M V+ = 5.5V, V- = -5.5V, VNO = -4.5V, VCOM = 4.5V 0.002 -5 C, E TA = +25°C MAX4052A, C, E MAX4053A M MAX4052, MAX4053 -0.1 TYP MAX (Note 2) 0.002 1 10 100 0.002 0.1 -2.5 2.5 -50 50 TA = +25°C -1 C, E -5 0.002 5 M -50 50 nA 1 _______________________________________________________________________________________ 3 MAX4051/A, MAX4052/A, MAX4053/A ELECTRICAL CHARACTERISTICS—Dual Supplies (continued) MAX4051/A, MAX4052/A, MAX4053/A Low-Voltage, CMOS Analog Multiplexers/Switches ELECTRICAL CHARACTERISTICS—Dual Supplies (continued) (V+ = +4.5V to +5.5V, V- = -4.5V to -5.5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER SYMBOL MIN CONDITIONS TYP MAX (Note 2) UNITS DIGITAL I/O ADD, INH Input Logic Threshold High VIH C, E, M ADD, INH Input Logic Threshold Low VIL C, E, M ADD, INH Input Current Logic High or Low IIH, IIL VADD, VINH = V+, 0V C, E, M 2.4 -1 V 0.03 0.8 V 1 µA SWITCH DYNAMIC CHARACTERISTICS TA = +25°C 50 175 Turn-On Time (Note 6) tON Figure 3 Turn-Off Time (Note 6) tOFF Figure 3 Transition Time tTRANS Figure 2 TA = +25°C Break-Before-Make Delay tOPEN Figure 4 TA = +25°C Charge Injection (Note 6) Q CL = 1nF, RS = 0Ω, VNO = 0V, Figure 5 TA = +25°C 2 VNO = GND, f = 1MHz, Figure 7 TA = +25°C 2 pF VCOM = GND, f = 1MHz, Figure 7 TA = +25°C 2 pF NO Off-Capacitance COM Off-Capacitance CNO(OFF) CCOM(OFF) C, E, M 225 TA = +25°C 40 C, E, M 150 200 75 2 250 10 ns ns ns ns 10 pC Switch On-Capacitance C(ON) VCOM = VNO = GND, f = 1MHz, Figure 7 TA = +25°C 8 pF Off-Isolation VISO CL = 15pF, RL = 50Ω, f = 100kHz, VNO = 1VRMS, Figure 6 TA = +25°C