MAX4372T/F/H
LE
AVAILAB
Low-Cost, UCSP/SOT23, Micropower, High-Side
Current-Sense Amplifier with Voltage Output
General Description
The MAX4372 low-cost, precision, high-side currentsense amplifier is available in a tiny, space-saving
SOT23-5-pin package. Offered in three gain versions
(T = 20V/V, F = 50V/V, and H = 100V/V), this device
operates from a single 2.7V to 28V supply and consumes only 30µA. It features a voltage output that eliminates the need for gain-setting resistors and is ideal for
today’s notebook computers, cell phones, and other
systems where battery/DC current monitoring is critical.
High-side current monitoring is especially useful in battery-powered systems since it does not interfere with
the ground path of the battery charger. The input common-mode range of 0 to 28V is independent of the supply voltage and ensures that the current-sense
feedback remains viable even when connected to a
2-cell battery pack in deep discharge.
The user can set the full-scale current reading by
choosing the device (T, F, or H) with the desired voltage gain and selecting the appropriate external sense
resistor. This capability offers a high level of integration
and flexibility, resulting in a simple and compact current-sense solution. For higher bandwidth applications,
refer to the MAX4173T/F/H data sheet.
Applications
Power-Management Systems
General-System/Board-Level Current Monitoring
Notebook Computers
Functional Diagrams
Portable/Battery-Powered Systems
Smart-Battery Packs/Chargers
Cell Phones
Features
o Low-Cost, Compact Current-Sense Solution
o 30µA Supply Current
o 2.7V to 28V Operating Supply
o 0.18% Full-Scale Accuracy
o 0.3mV Input Offset Voltage
o Low 1.5Ω Output Impedance
o Three Gain Versions Available
20V/V (MAX4372T)
50V/V (MAX4372F)
100V/V (MAX4372H)
o High Accuracy +2V to +28V Common-Mode
Range, Functional Down to 0V, Independent of
Supply Voltage
o Available in a Space-Saving 5-Pin SOT23 Package
and 3 x 2 UCSP™ (1mm x 1.5mm) Package
Ordering Information
PART
TEMP RANGE PIN-PACKAGE
MAX4372TEUK-T
MAX4372TEUK+T
MAX4372TESA+T
MAX4372TEBT-T
MAX4372TEBT+T
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
5 SOT23-5
8 SO
3 x 2 UCSP
Typical Operating Circuit
Pin Configurations
OUT
VCC
1
2
3
ILOAD
TOP VIEW
(BUMPS ON BOTTOM)
+
GND
5
GND
1
2
3
A
VCC
GND
OUT
A/D
CONVERTER
B
RS+
RS-
VCC
+2.7V TO +28V
RS-
MAX4372T/F/H
ADIU
—
ACX
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
Note: Gain values are as follows: 20V/V for the T version, 50V/V
for the F version, and 100V/V for the H version.
Ordering Information continued at end of datasheet.
Precision-Current Sources
TOP VIEW
TOP
MARK
RS-
MAX4372T/F/H
RSENSE
OUT
VSENSE
LOAD/
BATTERY
MAX4372T/F/H
4
RS+
UCSP
Pin Configurations
appear at end of data sheet.
SOT23-5
Functional Diagrams continued at end of data sheet.
Pin Configurations continued at end of datasheet.
UCSP is a trademark of Maxim Integrated Products, Inc.
VCC
RS+
0.1µF
VIN
0 TO 28V
UCSP is a trademark of Maxim Integrated Products, Inc.
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
19-1548; Rev 5; 5/11
MAX4372T/F/H
Low-Cost, UCSP/SOT23, Micropower, High-Side
Current-Sense Amplifier with Voltage Output
ABSOLUTE MAXIMUM RATINGS
VCC, RS+, RS- to GND ...........................................-0.3V to +30V
OUT to GND ...........................................................-0.3V to +15V
Differential Input Voltage (VRS+ - VRS-) ..............................±0.3V
Current into Any Pin..........................................................±10mA
Continuous Power Dissipation (TA = +70°C)
5-Pin SOT23 (derate 3.9mW/°C above +70°C)..........312.6mW
8-Pin SO (derate 7.4mW/°C above +70°C)................588.2mW
3 x 2 UCSP (derate 3.4mW/°C above +70°C) ...........273.2mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s). ................................+300°C
Soldering Temperature (reflow). ......................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VRS+ = 0 to 28V, VCC = 2.7V to 28V, VSENSE = 0V, RLOAD = 1MΩ, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.) (Note 1)
PARAMETER
Operating Voltage Range
(Note 2)
SYMBOL
CONDITIONS
MIN
TYP
UNITS
VCC
2.7
28
V
Common-Mode Input Range
(Note 3)
VCMR
0
28
V
Common-Mode Rejection
CMR
Supply Current
Leakage Current
ICC
IRS+, IRSIRS+
Input Bias Current
IRSFull-Scale Sense Voltage
(Note 4)
Input Offset Voltage
(Note 5)
Full-Scale Accuracy
(Note 5)
VSENSE
VOS
VRS+ > 2V
85
VRS+ > 2V, VSENSE = 5mV
30
60
µA
0.05
1.2
µA
VCC = 0V, VRS+ = 28V
Total OUT Voltage Error
(Note 6)
dB
VRS+ > 2V
0
1
VRS+ ≤ 2V
-25
2
VRS+ > 2V
0
2
VRS+ ≤ 2V
-50
150
Gain = 100V/V
100
mV
TA = +25°C
VCC = VRS+ = 12V
MAX4372_ESA
0.3
±0.8
MAX4372_EUK, _EBT
0.3
±1.3
TA = TMIN to TMAX
VCC = VRS+ = 12V
MAX4372_ESA
±1.1
MAX4372_EUK, _EBT
±1.9
VSENSE = 100mV, VCC = 12V,
VRS+ = 12V, TA = +25°C (Note 7)
µA
2
Gain = 20V/V or 50V/V
±0.18
VSENSE = 100mV, VCC = 12V,
VRS+ = 12V (Note 7)
2
MAX
±3
mV
%
±6
VSENSE = 100mV, VCC = 28V,
VRS+ = 28V (Note 7)
±0.15
±7
VSENSE = 100mV, VCC = 12V,
VRS+ = 0.1V (Note 7)
±1
±28
VSENSE = 6.25mV, VCC = 12V,
VRS+ = 12V (Note 8)
±0.15
%
Maxim Integrated
MAX4372T/F/H
Low-Cost, UCSP/SOT23, Micropower, High-Side
Current-Sense Amplifier with Voltage Output
ELECTRICAL CHARACTERISTICS (continued)
(VRS+ = 0 to 28V, VCC = 2.7V to 28V, VSENSE = 0V, RLOAD = 1MΩ, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
OUT Low Voltage
(MAX4372T, MAX4372F)
VOL
OUT Low Voltage
(MAX4372H)
VOL
OUT High Voltage
VCC - VOH
-3dB Bandwidth
BW
CONDITIONS
VCC = 2.7V,
VSENSE = -10mV
VRS+ = 28V
VCC = 2.7V,
VSENSE = -10mV
VRS+ = 12V
MIN
2.6
IOUT = 100µA
9
IOUT = 10µA
2.6
IOUT = 100µA
9
65
0.1
0.25
VSENSE = 20mV,
gain = 20V/V
275
VSENSE = 20mV,
gain = 50V/V
200
VSENSE = 20mV,
gain = 100V/V
110
VSENSE = 6.25mV
50
MAX4372T
Gain
65
UNITS
mV
mV
V
kHz
20
MAX4372F
50
MAX4372H
100
Gain Accuracy
TA = +25°C
VSENSE = 20mV
to 100mV,VRS+ =12V TA = -40°C to +85°C
OUT Settling Time to 1% of
Final Value
Gain = 20V/V,
VCC = 12V,
VRS+ = 12V,
CLOAD = 10pF
Capacitive-Load Stability
MAX
IOUT = 10µA
VRS+ = 28V, VCC = 2.7V, IOUT = -500µA,
VSENSE = 250mV
VRS+ = 12V,
VCC = 12V,
CLOAD = 10pF
TYP
±0.25
20
VSENSE = 100mV to
6.25mV
20
VSENSE = 100mV
Power-Supply Rejection
PSR
VOUT = 2V, VRS+ > 2V
%
µs
No sustained oscillations
ROUT
±2.5
±5.5
VSENSE = 6.25mV to
100mV
OUT Output Resistance
V/V
1000
75
pF
1.5
Ω
85
dB
Power-Up Time to 1% of
Final Value
VCC = 12V, VRS+ = 12V,
VSENSE = 100mV, CLOAD = 10pF
0.5
ms
Saturation Recovery Time
(Note 9)
VCC = 12V, VRS+ = 12V, CLOAD = 10pF
0.1
ms
Note 1: All devices are 100% production tested at TA = +25°C. All temperature limits are guaranteed by design.
Note 2: Guaranteed by PSR test.
Note 3: Guaranteed by OUT Voltage Error test.
Note 4: Output voltage is internally clamped not to exceed 12V.
Note 5: VOS is extrapolated from the gain accuracy tests.
Note 6: Total OUT voltage error is the sum of gain and offset voltage errors.
Note 7: Measured at IOUT = -500µA (RLOAD = 4kΩ for gain = 20V/V, RLOAD = 10kΩ for gain = 50V/V, RLOAD = 20kΩ for gain =
100V/V).
Note 8: 6.25mV = 1/16 of 100mV full-scale voltage (C/16).
Note 9: The device will not reverse phase when overdriven.
Maxim Integrated
3
MAX4372T/F/H
Low-Cost, UCSP/SOT23, Micropower, High-Side
Current-Sense Amplifier with Voltage Output
Typical Operating Characteristics
(VCC = 12V, VRS+ = 12V, VSENSE = 100mV, TA = +25°C, unless otherwise noted.)
AV = +100V/V
AV = +50V/V
30.0
35
AV = +20V/V
30
AV = +100V/V
31.5
SUPPLY CURRENT (μA)
32.5
32.0
MAX4372T toc02
MAX4372 toc01
40
SUPPLY CURRENT (μA)
25
20
15
8
12
16
20
24
-15
28.0
10
35
60
85
8
12
16
20
24
1.0
-0.4
-0.6
-45
-50
-55
AV = +100V/V
0.5
PSR (dB)
G = +50V/V
G = +20V/V
-40
28
MAX4372T toc06
1.5
AV = +50V/V
AV = +20V/V
0
-60
-65
-70
-75
-80
-0.5
-1.0
-85
10
15
20
25
-90
-1.0
30
0
50
1.4
0.8
G = +50V/V
G = +100V/V
0.4
G = +20V/V
10
15
20
300
100
1k
-0.2
25
COMMON-MODE VOLTAGE (V)
30
AV = +100V/V
-0.4
100k
TOTAL OUTPUT ERROR vs. TEMPERATURE
AV = +50V/V
-0.3
10k
FREQUENCY (Hz)
AV = +20V/V
-0.1
GAIN ACCURACY (%)
1.0
5
250
GAIN ACCURACY vs. TEMPERATURE
1.2
0
200
0
MAX4372T toc07
1.6
0.2
150
VSENSE (mV)
TOTAL OUTPUT ERROR
vs. COMMON-MODE VOLTAGE
0.6
100
-0.5
-0.6
-0.7
1.0
0.8
TOTAL OUTPUT ERROR (%)
5
MAX4372T toc08
0
SUPPLY VOLTAGE (V)
OUTPUT ERROR (%)
4
POWER-SUPPLY REJECTION
vs. FREQUENCY
-0.8
4
VSENSE = 5mV
0
TOTAL OUTPUT ERROR vs. VSENSE
OUTPUT ERROR (%)
OUTPUT ERROR (%)
-40
TOTAL OUTPUT ERROR
vs. SUPPLY VOLTAGE
-0.2
0
AV = +20V/V
COMMON-MODE VOLTAGE (V)
0.4
-1.2
29.5
TEMPERATURE (°C)
G = +100V/V
0
AV = +50V/V
SUPPLY VOLTAGE (V)
0.6
0.2
28
MAX4372T toc05
4
VSENSE = 5mV
0
MAX4372 toc04
0
30.0
28.5
5
VSENSE = 5mV
25.0
30.5
29.0
10
27.5
31.0
MAX4372T toc09
SUPPLY CURRENT (μA)
35.0
SUPPLY CURRENT
vs. COMMON-MODE VOLTAGE
SUPPLY CURRENT vs. TEMPERATURE
MAX4372 toc03
SUPPLY CURRENT vs. SUPPLY VOLTAGE
0.6
0.4
AV = +50V/V
0.2
0
-0.2
-0.4
-0.8
-0.6
-0.9
-0.8
AV = +100V/V
AV = +20V/V
-1.0
-1.0
-40
-15
10
35
TEMPERATURE (°C)
60
85
-40
-15
10
35
60
85
TEMPERATURE (°C)
Maxim Integrated
MAX4372T/F/H
Low-Cost, UCSP/SOT23, Micropower, High-Side
Current-Sense Amplifier with Voltage Output
Typical Operating Characteristics (continued)
(VCC = 12V, VRS+ = 12V, VSENSE = 100mV, TA = +25°C, unless otherwise noted.)
MAX4372T
SMALL-SIGNAL TRANSIENT RESPONSE
MAX4372F
SMALL-SIGNAL TRANSIENT RESPONSE
MAX4372H
SMALL-SIGNAL TRANSIENT RESPONSE
MAX4372T toc10
MAX4372T toc11
MAX4372T toc12
30mV
30mV
VSENSE
30mV
VSENSE
VSENSE
10mV
10mV
600mV
VOUT
10mV
3V
1.5V
VOUT
VOUT
200mV
1V
0.5V
20μs/div
20μs/div
20μs/div
MAX4372F
LARGE-SIGNAL TRANSIENT RESPONSE
MAX4372T
LARGE-SIGNAL TRANSIENT RESPONSE
MAX4372T toc14
MAX4372T toc13
150mV
VSENSE
150mV
VSENSE
50mV
50mV
3V
7.5V
VOUT
VOUT
2.5V
1V
20μs/div
20μs/div
MAX4372H
LARGE-SIGNAL TRANSIENT RESPONSE
SMALL-SIGNAL GAIN vs. FREQUENCY
MAX4372T toc15
MAX4372T toc16
3
2
1
100mV
VSENSE
G = 50V/V
0
10V
GAIN (dB)
0
G = 20V/V
-1
-2
-3
G = 100V/V
-4
VOUT
-5
-6
0
-7
-8
20μs/div
VSENSE = 20mV
1k
10k
100k
1M
FREQUENCY (Hz)
Maxim Integrated
5
MAX4372T/F/H
Low-Cost, UCSP/SOT23, Micropower, High-Side
Current-Sense Amplifier with Voltage Output
Pin/Bump Description
PIN
BUMP
SOT23
1
SO
3
UCSP
A2
2
4
3
4
NAME
FUNCTION
GND
Ground
A3
OUT
Output Voltage. VOUT is proportional to the magnitude of VSENSE
(VRS+ - VRS-).
1
A1
VCC
Supply Voltage. Use at least a 0.1µF capacitor to decouple VCC from fast
transients.
8
B1
RS+
Power Connection to the External Sense Resistor
5
6
B3
RS-
Load-Side Connection to the External Sense Resistor
—
2, 5, 7
—
N.C.
No Connection. Not internally connected.
_______________Detailed Description
The MAX4372 high-side current-sense amplifier features a 0 to 28V input common-mode range that is independent of supply voltage. This feature allows the
monitoring of current flow out of a battery in deep discharge, and also enables high-side current sensing at
voltages far in excess of the supply voltage (VCC).
Current flows through the sense resistor, generating a
sense voltage (Figure 1). Since A1’s inverting input is
high impedance, the voltage on the negative terminal
equals VIN - VSENSE. A1 forces its positive terminal to
match its negative terminal; therefore, the voltage
across RG1 (VIN - V1-) equals VSENSE. This creates a
current to flow through RG1 equal to VSENSE / RG1. The
transistor and current mirror amplify the current by a
factor of β. This makes the current flowing out of the
current mirror equal to:
IM = β VSENSE / RG1
A2’s positive terminal presents high impedance, so this
current flows through RGD, with the following result:
V2+ = RGD β · VSENSE / RG1
R1 and R2 set the closed-loop gain for A2, which amplifies V2+, yielding:
VOUT = RGD · β · VSENSE / RG1 (1 + R2 / R1)
The gain of the device equals:
VOUT
= RGD · β (1 + R2 / R1) / RG1
VSENSE
__________Applications Information
Recommended Component Values
The MAX4372 operates over a wide variety of current
ranges with different sense resistors. Table 1 lists common resistor values for typical operation of the
MAX4372.
6
VIN
0 TO 28V
RG1
100kΩ
2.7V
TO
28V
V1+
VCC
A1
RG2
100kΩ
RS+
RSENSE
ILOAD
V1CURRENT
MIRROR
RGD
IM
TO
LOAD
MAX4372T/F/H
OUT
VSENSE
RS-
V2+
A2
V2-
R2
R1
GND
Figure 1. Functional Diagram
Choosing RSENSE
Given the gain and maximum load current, select RSENSE
such that VOUT does not exceed VCC - 0.25V or 10V. To
measure lower currents more accurately, use a high
value for RSENSE. A higher value develops a higher sense
voltage, which overcomes offset voltage errors of the
internal current amplifier.
In applications monitoring very high current, ensure
RSENSE is able to dissipate its own I2R losses. If the
resistor’s rated power dissipation is exceeded, its value
may drift or it may fail altogether, causing a differential
voltage across the terminals in excess of the absolute
maximum ratings.
Maxim Integrated
MAX4372T/F/H
Low-Cost, UCSP/SOT23, Micropower, High-Side
Current-Sense Amplifier with Voltage Output
Table 1. Recommended Component Values
FULL-SCALE LOAD
CURRENT,
ILOAD (A)
0.1
1
5
10
CURRENT-SENSE
RESISTOR,
RSENSE (mΩ)
1000
100
20
10
Using a PC Board Trace as RSENSE
If the cost of RSENSE is an issue and accuracy is not
critical, use the alternative solution shown in Figure 2.
This solution uses copper PC board traces to create a
sense resistor. The resistivity of a 0.1-inch-wide trace of
2-ounce copper is about 30mΩ/ft. The resistance temperature coefficient of copper is fairly high (approximately 0.4%/°C), so systems that experience a wide
temperature variance must compensate for this effect.
In addition, self-heating will introduce a nonlinearity
error. Do not exceed the maximum power dissipation of
the copper trace.
For example, the MAX4372T (with a maximum load current of 10A and an RSENSE of 5mΩ) creates a full-scale
VSENSE of 50mV that yields a maximum VOUT of 1V.
RSENSE, in this case, requires about 2 inches of 0.1inch-wide copper trace.
GAIN
(V/V)
FULL-SCALE OUTPUT
VOLTAGE (FULL-SCALE
VSENSE = 100mV),
VOUT (V)
20
2.0
50
5.0
100
10.0
20
2.0
50
5.0
100
10.0
20
2.0
50
5.0
100
10.0
20
2.0
50
5.0
100
10.0
INPUT
0.3in COPPER
LOAD/BATTERY
RSENSE
0.1in COPPER
0.3in COPPER
VSENSE
RS+
VCC
2.7V TO 28V
MAX4372T/F/H
RS-
OUT
GND
UCSP Applications Information
For the latest application details on UCSP construction,
dimensions, tape carrier information, printed circuit
board techniques, bump-pad layout, and recommended reflow temperature profile, as well as the latest information on reliability testing results, go to the Maxim's
website at www.maxim-ic.com/ucsp to find the
Application Note: UCSP—A Wafer-Level Chip-Scale
Package.
Maxim Integrated
Figure 2. Connections Showing Use of PC Board
7
MAX4372T/F/H
Low-Cost, UCSP/SOT23, Micropower, High-Side
Current-Sense Amplifier with Voltage Output d
Ordering Information (continued)
PART
TEMP RANGE PIN-PACKAGE
Pin Configurations (continued)
TOP
MARK
MAX4372FEUK+T -40°C to +85°C 5 SOT23-5
T -40°C to +85°C 8 SO
MAX4372FESA+T
ADIV
—
MAX4372FEBT+T -40°C to +85°C 3 x 2 UCSP
ACY
MAX4372HEUK+T -40°C to +85°C 5 SOT23-5
+T -40°C to +85°C 8 SO
MAX4372HESA+T
MAX4372HEBT+T -40°C to +85°C 3 x 2 UCSP
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
ADIW
—
ACZ
+
VCC
1
8
RS+
N.C.
2
7
N.C.
GND
3
6
RS-
OUT 4
5
N.C.
MAX4372T/F/H
SO
Chip Information
PROCESS: BiCMOS
Package Information
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
OUTLINE NO.
LAND PATTERN NO.
5 SOT23
PACKAGE CODE
U5+1
21-0057
90-0174
8 SO
S8+2
21-0041
90-0096
5 UCSP
B6+2
21-0097
6L, UCSP.EPS
PACKAGE TYPE
Note: MAX4372_EBT uses package code B6-2.
8
Maxim Integrated
MAX4372T/F/H
Low-Cost, UCSP/SOT23, Micropower, High-Side
Current-Sense Amplifier with Voltage Output
Package Information (continued)
SOICN .EPS
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
Maxim Integrated
9
MAX4372T/F/H
Low-Cost, UCSP/SOT23, Micropower, High-Side
Current-Sense Amplifier with Voltage Output
Package Information (continued)
SOT-23 5L .EPS
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
10
Maxim Integrated
MAX4372T/F/H
Low-Cost, UCSP/SOT23, Micropower, High-Side
Current-Sense Amplifier with Voltage Output
Revision History
REVISION
NUMBER
REVISION
DATE
4
7/09
Updated feature in accordance with actual performance of the product
5
5/11
Updated VRST conditions to synchronize with tested material and added
lead-free designation
DESCRIPTION
PAGES
CHANGED
1
1, 2, 3, 8
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical
Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000
© Maxim Integrated
11
The Maxim logo and Maxim Integrated are trademarks of Maxim Integrated Products, Inc.
工商网监
湘ICP备2023018690号
