MAX4480AUK-T

MAX4480–MAX4483 Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown General Description The MAX4480–MAX4483 low-cost, general-purpose op amps offer rail-to-rail outputs, draw only 50µA of quiescent current, and operate from a single +2.5V to +5.5V supply. For additional power conservation, the MAX4481 offers a low-power shutdown mode that reduces supply current to 0.5µA (max) and puts the amplifier’s output in a high-impedance state. These devices are unity-gain stable with capacitive loads up to 400pF. The MAX4480– MAX4483 are specified to +125°C, making them suitable for use in a variety of harsh environments, such as automotive applications. The MAX4480 is a single amplifier offered in a tiny 5-pin SC70 package. The MAX4481 is a single amplifier with a low-power shutdown mode that reduces supply current to < 0.5µA and comes in a 6-pin SC70 package. The MAX4482 is a dual amplifier and comes in the spacesaving 8-pin SOT23 or µMAX® package. The MAX4483 is a quad amplifier and comes in a 14-pin TSSOP package. All devices are specified for operation across the -40°C to +125°C automotive temperature range. Features ♦ Single +2.5V to +5.5V Supply Voltage Range ♦ 50µA Quiescent Current per Amplifier ♦ 0.5µA (max) Shutdown Mode (MAX4481) ♦ Available in Space-Saving Packages 5-Pin SC70 (MAX4480) 6-Pin SC70 (MAX4481) 8-Pin SOT23 (MAX4482) ♦ 105dB AVOL with 5kΩ Load ♦ 0.005% THD with 100kΩ Load ♦ Rail-to-Rail Output Voltage Swing ♦ 3.0mA of Sink and Source Load Current ♦ Unity-Gain Stable up to CLOAD = 400pF Ordering Information PART Selector Guide MAX4480AXK+T TEMP RANGE -40°C to +125°C PINTOP PACKAGE MARK 5 SC70 ABU ADPJ MAX4480AUK+T -40°C to +125°C 5 SOT23 MAX4481AXT+T -40°C to +125°C 6 SC70 MAX4481AUT+T -40°C to +125°C 6 SOT23 NO. OF AMPLIFIERS PER PACKAGE SHUTDOWN MODE MAX4480 1 No MAX4481MXT/PR2-W -55°C to +125°C 6 SC70 AEE MAX4481 1 Yes MAX4482AKA+T -40°C to +125°C 8 SOT23 AAEJ MAX4482 2 No MAX4482ASA+ -40°C to +125°C 8 SO MAX4483 4 No MAX4482AUA+ -40°C to +125°C 8 μMAX — MAX4483ASD+ -40°C to +125°C 14 SO — MAX4483AUD+ -40°C to +125°C 14 TSSOP — PART Applications Single-Supply Zero-Crossing Detectors AAN AAOS — +Denotes a lead(Pb)-free/RoHS compliant package. T = Tape and reel. Pin Configurations Instruments and Terminals Portable Communications MAX4480 Electronic Ignition Modules Infrared Receivers Sensor Signal Detection IN+ 1 + MAX4481 5 VDD VSS 2 4 OUT IN- 3 IN+ 1 6 VDD VSS 2 5 SHDN IN- 3 4 OUT SC70-5/SOT23-5 µMAX is a registered trademark of Maxim Integrated Products, Inc. + SC70-6/SOT23-6 Pin Configurations continued at end of data sheet. For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com. 19-1809; Rev 2; 10/12 MAX4480–MAX4483 Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown ABSOLUTE MAXIMUM RATINGS 8-Pin µMAX (derate 4.5mW/°C above +70°C) ............ 362mW 8-Pin SO (derate 5.9mW/°C above +70°C)................. 471mW 14-Pin TSSOP (derate 9.1mW/°C above +70°C) .........727mW 14-Pin SO (derate 8.33mW/°C above +70°C)............. 667mW Operating Temperature Range .........................-40°C to +125°C Military Operating Temperature Range .............-55°C to +125°C Junction Temperature ........................................................150°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10s) ...............................+3000°C Soldering Temperature (reflow) .......................................+240°C Power-Supply Voltage (VDD to VSS) .........................-0.3V to +6V All Other Pins ...................................(VSS - 0.3V) to (VDD + 0.3V) Output Short-Circuit Duration (OUT shorted to VSS or VDD)................................. Continuous Continuous Power Dissipation (TA = +70°C) 5-Pin SC70 (derate 3.1mW/°C above +70°C) ............. 247mW 6-Pin SC70 (derate 3.1mW/°C above +70°C) ..............245mW 5-Pin SOT23 (derate 3.1mW/°C above +70°C)............247mW 6-Pin SOT23 (derate 8.7mW/°C above +70°C)............696mW 8-Pin SOT23 (derate 5.1mW/°C above +70°C)............408mW Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VDD = +5V, VSS = 0V, VCM = 0V, VOUT = VDD/2, RL ≥ 1MΩ connected to VDD/2, SHDN = VDD (MAX4481 only), TA = +25°C, unless otherwise noted.) PARAMETER Supply Voltage Range SYMBOL VDD Supply Current per Amplifier IDD Supply Current in Shutdown ISHDN Input Offset Voltage CONDITIONS MIN TYP 2.5 Inferred from PSRR test VDD = 2.5V 45 VDD = 5.0V 50 SHDN = VSS (MAX4481 only) VOS MAX UNITS 5.5 V 100 µA 0.05 0.5 µA ±1 ±5.5 mV pA IB (Note 1) ±0.1 ±100 Input Offset Current IOS (Note 1) ±0.1 ±100 Input Resistance RIN Differential or common mode 1000 Input Common-Mode Voltage Range VCM Inferred from CMRR test VSS Common-Mode Rejection Ratio CMRR VSS ≤ VCM ≤ VDD - 1.3V 71 86 dB Power-Supply Rejection Ratio PSRR 2.5V ≤ VDD ≤ 5.5V 82 92 dB Input Bias Current Large-Signal Voltage Gain AVOL VSS + 0.02V ≤ VOUT ≤ VDD - 0.03V RL = 100kΩ VSS + 0.10V ≤ VOUT ≤ VDD - 0.20V RL = 5kΩ VDD - 1.3 dB 94 105 VOH Specified as VDD - VOUT RL = 100kΩ 4 RL = 5kΩ 80 Output Voltage Low VOL Specified as VOUT - VSS RL = 100kΩ 1 RL = 5kΩ 8 Output Short-Circuit Current ISC Sourcing 3 Sinking 17 Shutdown Mode Output Leakage IOUTSHDN Device in shutdown mode, SHDN = VSS, VSS < VOUT < VCC (MAX4481 only) SHDN Logic Low VIL MAX4481 only SHDN Logic High VIH MAX4481 only SHDN Input Current Gain-Bandwidth Product GBW 2 V 110 Output Voltage High IIL, IIH pA MΩ SHDN = VDD or VSS (MAX4481 only) 150 30 mV mA ±0.01 ±0.1 0.3 ✕ VDD 0.7 ✕ VDD ±0.001 mV µA V V ±1 140 ±500 nA kHz Maxim Integrated MAX4480–MAX4483 Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown ELECTRICAL CHARACTERISTICS (continued) (VDD = +5V, VSS = 0V, VCM = 0V, VOUT = VDD/2, RL ≥ 1MΩ connected to VDD/2, SHDN = VDD (MAX4481 only), TA = +25°C, unless otherwise noted.) PARAMETER Phase Margin SYMBOL CONDITIONS MIN φM Gain Margin TYP MAX UNITS 70 degrees 30 dB Slew Rate SR 80 V/ms Input Voltage Noise Density en f = 10kHz 100 nV/√Hz Input Current Noise Density in f = 10kHz 1 fA/√Hz Capacitive-Load Stability CLOAD AV = +1V/V 400 pF Shutdown Delay Time tSHDN MAX4481 only 0.4 µs tEN MAX4481 only 12 µs Enable Delay Time Power-On Time tON 15 µs Input Capacitance CIN 2.0 pF Total Harmonic Distortion THD 0.005 % 50 µs Settling Time to 0.1% tS f = 1kHz, VOUT = 2Vp-p, AV = +1V/V RL = 100kΩ VOUT = 2V step ELECTRICAL CHARACTERISTICS (VDD = +5V, VSS = 0V, VCM = 0V, VOUT = VDD/2, RL ≥ 1MΩ connected to VDD/2, SHDN = VDD (MAX4481 only), TA = -40°C to +125°C, unless otherwise noted.) (Note 2) PARAMETER SYMBOL Supply Voltage Range VDD Supply Current per Amplifier IDD Supply Current in Shutdown ISHDN Input Offset Voltage Input Offset Voltage Drift CONDITIONS MIN TYP 2.5 Inferred from PSRR test SHDN = VSS, (MAX4481 only) VOS MAX V 120 µA 1.0 µA 9 mV ±3 TCVOS UNITS 5.5 µV/°C IB (Note 1) ±100 pA Input Offset Current IOS (Note 1) ±100 pA Input Common-Mode Voltage Range VCM Inferred from CMRR test VSS Common-Mode Rejection Ratio CMRR VSS ≤ VCM ≤ VDD - 1.4V 67 dB Power-Supply Rejection Ratio PSRR 2.5V ≤ VCC ≤ 5.5V 77 dB Input Bias Current Shutdown Mode Output Leakage IOUTSHDN Device in shutdown mode, SHDN = VSS, VSS < VOUT < VCC (MAX4481 only) SHDN Logic Low VIL MAX4481 only SHDN Logic High VIH MAX4481 only VDD - 1.4 ±0.5 -40°C to +85°C µA ±2.5 +85°C to +125°C SHDN Input Current IIL, IIH SHDN = VDD or VSS (Note 1) (MAX4481 only) Large-Signal Voltage Gain AVOL VSS + 0.1V ≤ VOUT ≤ VDD - 0.20V, RL = 5kΩ Output Voltage High VOH Specified as VDD - VOUT, RL = 5kΩ 0.3 ✕ VDD 0.7 ✕ VDD V V 1 µA 200 mV 84 dB 50 Output Voltage Low VOL Specified as VOUT - VSS, RL = 5kΩ Note 1: Guaranteed by design. Note 2: Specifications are 100% tested at TA = +25°C (exceptions noted). All temperature limits are guaranteed by design. Maxim Integrated V mV 3 MAX4480–MAX4483 Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown Typical Operating Characteristics (VDD = +5V, VSS = 0V, VCM = VDD/2, V SHDN = 5V, RL ≥ 1MΩ connected to VDD/2, TA = +25°C, unless otherwise noted.) 1 10 100 1k 10k 100k PSRR (dB) -90 AVCL = +1000V/V 1 100k 10 1M 1k 10k 100k FREQUENCY (Hz) SUPPLY CURRENT vs. TEMPERATURE MAX4481 SHUTDOWN SUPPLY CURRENT vs. TEMPERATURE 100k MAX4480 toc05 56 54 52 50 48 46 1M VSHDN = VSS 10k 44 0.1 100 FREQUENCY (Hz) SUPPLY CURRENT (pA) 10 10k 58 SUPPLY CURRENT (μA) OUTPUT IMPEDANCE (Ω) 100 -110 1k 100 10 60 MAX4480 toc4 1000 -50 -70 FREQUENCY (Hz) OUTPUT IMPEDANCE vs. FREQUENCY MAX4480 toc03 -30 1 1M -10 MAX4480 toc06 AVCL = +1000V/V 10 MAX4480 toc02 MAX4480 toc01 80 60 40 20 0 -20 -40 -60 -80 -100 -120 -140 -160 -180 GAIN (dB)/PHASE (degrees) GAIN (dB)/PHASE (degrees) 80 60 40 20 0 -20 -40 -60 -80 -100 -120 -140 -160 -180 POWER-SUPPLY REJECTION RATIO vs. FREQUENCY GAIN AND PHASE vs. FREQUENCY (CL = 400pF) GAIN AND PHASE vs. FREQUENCY (NO LOAD) 1k 100 10 42 40 1 10 100 1k 10k 100k 1 -40 -20 1M 0 20 40 60 80 MAX4481 OUTPUT LEAKAGE CURRENT vs. TEMPERATURE 100k 1500 1000 1k 0 -500 100 40 60 80 TEMPERATURE (°C) 4 100 120 100 120 RL = 5kΩ to VDD/2 90 80 70 60 40 -1500 20 80 50 -1000 10 60 100 VDD - VOUT (mV) VOS (μV) ILEAK (pA) 500 10k 40 OUTPUT VOLTAGE SWING HIGH vs. TEMPERATURE MAX4480 toc08 VSHDN = VSS VOUT = VDD/2 20 TEMPERATURE (°C) INPUT OFFSET VOLTAGE vs. TEMPERATURE MAX4480 toc07 1000k 0 0 TEMPERATURE (°C) FREQUENCY (Hz) -40 -20 -40 -20 100 120 MAX4480 toc09 0.01 -40 -20 0 20 40 60 80 TEMPERATURE (°C) 100 120 -40 -20 0 20 40 60 80 100 120 TEMPERATURE (°C) Maxim Integrated MAX4480–MAX4483 Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown Typical Operating Characteristics (continued) (VDD = +5V, VSS = 0V, VCM = VDD/2, V SHDN = 5V, RL ≥ 1MΩ connected to VDD/2, TA = +25°C, unless otherwise noted.) COMMON-MODE REJECTION RATIO vs. TEMPERATURE RL = 5kΩ to VDD/2 10 130 MAX4480 toc11 -80 MAX4480 toc10 11 LARGE-SIGNAL GAIN vs. OUTPUT VOLTAGE -82 120 115 8 7 -84 GAIN (dB) CMRR (dB) -86 110 105 100 95 6 90 -88 5 85 -90 4 -40 -20 0 20 40 60 80 80 -40 -20 100 120 0 40 60 80 100 120 0.5 1.0 1.5 2.0 TEMPERATURE (°C) TEMPERATURE (°C) 1.8 10 THD + N (%) VDD (MIN) 4.0 RL = 5kΩ VOUT = 2VP-P AV = +1 BW = 30kHz 1.7 100 3.5 100 MAX4480 toc14 1.9 105 3.0 4.5 TOTAL HARMONIC DISTORTION PLUS NOISE vs. FREQUENCY 2.0 MAX4480 toc13 RL = 5kΩ to VDD/2 2.5 VOUT (V) MINIMUM OPERATING VOLTAGE vs. TEMPERATURE LARGE-SIGNAL GAIN vs. TEMPERATURE 110 20 1.6 1.5 1.4 MAX4480 toc15 VOUT - VSS (mV) RL = 5kΩ to VDD/2 125 9 GAIN (dB) MAX4480 toc12 OUTPUT VOLTAGE SWING LOW vs. TEMPERATURE 1 0.1 1.3 95 1.2 0.01 1.1 90 1.0 -40 -20 0 20 40 60 80 20 40 60 10 80 100 120 100 1k 10k 100k TEMPERATURE (°C) FREQUENCY (Hz) TOTAL HARMONIC DISTORTION PLUS NOISE vs. FREQUENCY TOTAL HARMONIC DISTORTION PLUS NOISE vs. INPUT AMPLITUDE TOTAL HARMONIC DISTORTION PLUS NOISE vs. INPUT AMPLITUDE 0.1 0.01 1 0.1 100 1k FREQUENCY (Hz) Maxim Integrated 10k 100k MAX4480 toc18 0.1 0.001 0.001 10 1 0.01 0.01 0.001 RL = 100kΩ f = 1kHz BW = 22kHz 10 THD + N (%) 1 RL = 5kΩ f = 1kHz BW = 22kHz 10 100 MAX4480 toc17 100 MAX4480 toc16 RL = 100kΩ VOUT = 2VP-P AV = +1 BW = 30kHz THD + N (%) THD + N (%) 0 TEMPERATURE (°C) 100 10 0.001 -40 -20 100 120 0 1 2 VIN (Vp-p) 3 0 0.5 1.0 1.5 2.0 2.5 3.0 VIN (Vp-p) 5 MAX4480–MAX4483 Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown Typical Operating Characteristics (continued) (VDD = +5V, VSS = 0V, VCM = VDD/2, V SHDN = 5V, RL ≥ 1MΩ connected to VDD/2, TA = +25°C, unless otherwise noted.) NONINVERTING SMALL-SIGNAL TRANSIENT RESPONSE AV = +1V/V TA = +25°C RL // CL MAX4480 roc20 20 MAX4480 toc19 CAPACITIVE-LOAD STABILITY CAPACITIVE LOAD (nF) 15 IN UNSTABLE REGION AV = 1V/V RL = 5kΩ 10 50mV/div STABLE REGION 5 OUT 0 1k 10k 100k 20μs/div RESISTIVE LOAD (Ω) NONINVERTING LARGE-SIGNAL TRANSIENT RESPONSE PERCENT OVERSHOOT vs. CAPACITIVE LOAD OVERSHOOT (%) 1V/div POSITIVE OVERSHOOT 20 IN MAX4480 toc22 MAX4480 roc21 25 15 10 NEGATIVE OVERSHOOT 5 OUT AV = 1V/V RL = 5kΩ 0 0 100μs/div 100 200 300 400 500 600 CLOAD (pF) CHANNEL-TO-CHANNEL ISOLATION vs. FREQUENCY SUPPLY CURRENT vs. SUPPLY VOLTAGE VOUT = VDD/2 50 SUPPLY CURRENT (μA) 100 90 80 70 60 50 40 MAX4480 toc24 110 40 30 20 10 30 0 20 10 100 1k 10k 100k FREQUENCY (kHz) 6 60 MAX4480 toc23 CHANNEL-TO-CHANNEL ISOLATION (dB) 120 1M 0 1 2 3 4 5 6 SUPPLY VOLTAGE (V) Maxim Integrated MAX4480–MAX4483 Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown Pin Description PIN NAME FUNCTION MAX4480 MAX4481 MAX4482 MAX4483 1 1 — — IN+ — — 3 3 INA+ Noninverting Amplifier Input A — — 5 5 INB+ Noninverting Amplifier Input B — — — 10 INC+ Noninverting Amplifier Input C — — — 12 IND+ Noninverting Amplifier Input D 2 2 4 11 VSS Negative Supply. Connect to ground for single-supply operation. Use a 0.01µF bypass capacitor to GND. 3 3 — — IN- Inverting Amplifier Input — — 2 2 INA- Inverting Amplifier Input A — — 6 6 INB- Inverting Amplifier Input B — — — 9 INC- Inverting Amplifier Input C — — — 13 IND- Inverting Amplifier Input D 4 4 — — OUT Amplifier Output — — 1 1 OUTA Amplifier Output A — — 7 7 OUTB Amplifier Output B — — — 8 OUTC Amplifier Output C — — — 14 OUTD Amplifier Output D 5 6 8 4 VDD — 5 — — SHDN Noninverting Amplifier Input Positive Supply. Use a 0.01µF bypass capacitor to GND. Active-Low Shutdown Input. Connect to VDD for normal operation. Do not leave floating. Detailed Description Rail-to-Rail Output Stage The MAX4480–MAX4483 can drive a 5kΩ load and still typically swing within 80mV of the supply rails. Figure 1 shows the MAX4480 output voltage swing configured with AV = +10V/V. 1V/div Driving Capacitive Loads Driving a capacitive load can cause instability in many op amps, especially those with low quiescent current. The MAX4480–MAX4483 are unity-gain stable for a range of capacitive loads to above 400pF. Figure 2 shows the MAX4480 response with an excessive capacitive load. Adding a series resistor between the output and the load capacitor (Figure 3) improves the Maxim Integrated 100μs/div Figure 1. Rail-to-Rail Output Operation 7 MAX4480–MAX4483 Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown RISO 50mV/div MAX4480 MAX4481 MAX4482 MAX4483 CL CL = 1nF 20μs/div Figure 2. Small-Signal Transient Response with Excessive Capacitive Load Figure 3. Capacitive-Load-Driving Circuit VDD 2V/div 2V/div OUT 1V/div RL = 10MΩ TO VSS, CL = 25pF 400μs/div 4μs/div Figure 4. Shutdown Waveform Figure 5. Power-Up/Down Waveform circuit’s response by isolating the load capacitance from the op amp’s output. Applications Information Shutdown Mode The MAX4481 features a low-power shutdown mode. When SHDN goes low, the supply current drops to 0.05µA (typ) and the output enters a high-impedance state. Pull SHDN high to enable the amplifier. Do not leave SHDN floating. Figure 4 shows the shutdown waveform. Power Supplies and Layout The MAX4480–MAX4483 operate from a single +2.5V to +5.5V power supply. Bypass the power supply with a 0.1µF capacitor to ground. Good layout techniques optimize performance by decreasing the amount of stray capacitance at the op amp’s inputs and outputs. To decrease stray capacitance, minimize trace lengths by placing external components close to the op amp’s pins. Chip Information Power-Up The MAX4480–MAX4483 outputs typically settle within 50µs after power-up. Figure 5 shows the output voltage on power-up and power-down. 8 PROCESS: BiCMOS Maxim Integrated MAX4480–MAX4483 Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown Pin Configurations (continued) MAX4483 OUTA 1 14 OUTD INA- 2 13 IND- INA+ 3 12 IND+ VDD 4 11 VSS INB+ 5 10 INC+ INB- 6 9 INC- OUTB 7 8 OUTC MAX4482 OUTA 1 8 VDD INA- 2 7 OUTB INA+ 3 6 INB- VSS 4 5 INB+ SOT23/SO/μMAX TSSOP/SO Package Information For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE PACKAGE CODE OUTLINE NO. LAND PATTERN NO. 5 SC70 X5+1 21-0076 90-0188 5 SOT23 U5+1 21-0057 90-0174 6 SC70 X6SN+1 21-0077 90-0189 6 SOT23 U6SN+1 21-0058 90-0175 8 SOT23 K8+5 21-0078 90-0176 8 SO S8+2 21-0041 90-0096 8 µMAX U8+1 21-0036 90-0092 14 TSSOP U14+1 21-0066 90-0013 14 SO S14+1 21-0041 90-0112 Maxim Integrated 9 MAX4480–MAX4483 Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown Revision History REVISION NUMBER REVISION DATE 0 10/00 Initial release 1 1/01 Released MAX4481, revised Electrical Characteristics and Figures 2 and 4. 10/12 Added MAX4481MXT/PR2-W and lead-free notation to Ordering Information. Revised Absolute Maximum Ratings with military temp range. 2 DESCRIPTION PAGES CHANGED — 1, 2, 3, 8 1, 2 Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. 10 © 2012 Maxim Integrated Products, Inc. Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000 Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.