0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
MAX6468US46D3+T

MAX6468US46D3+T

  • 厂商:

    AD(亚德诺)

  • 封装:

    SOT143-4

  • 描述:

    IC MPU/RESET CIRC 4.625V SOT143

  • 数据手册
  • 价格&库存
MAX6468US46D3+T 数据手册
Click here to ask an associate for production status of specific part numbers. MAX6467/MAX6468 Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset General Description The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the reset mode for a fixed timeout period only, even in the event of a continuously asserted manual reset. The MAX6467/ MAX6468 significantly improve system reliability compared to traditional manual reset supervisory circuits. A variety of factory-trimmed threshold options accommodate different supply voltages and tolerances, eliminating external components. The factory-set thresholds range from +1.575V to +4.625V to monitor +5.0V, +3.3V, +3.0V, +2.5V, and +1.8V supplies with various tolerances. Reset timeout periods of 150ms (min) and 1200ms (min) are available to accommodate different µP platforms. A single, active-low RESET output asserts when VCC drops below its threshold or if the edge-triggered MR asserts low. RESET remains low for the reset timeout period after VCC rises above its threshold and for a fixed, one-shot timeout period after a manual reset input falling edge. RESET remains valid as long as VCC remains above +1V. Open-drain (MAX6467) and pushpull (MAX6468) output options provide additional flexibility in the system design. The MAX6467/MAX6468 are offered in the space-saving 4-pin SOT143 package and the ultra-small 4-pin SC70 package and are specified over the automotive (-40°C to +125°C) temperature range. Features ● Precision Factory-Set Reset Threshold Voltages for +5.0V, +3.3V, +3.0V, +2.5V, and +1.8V Supplies ● Edge-Triggered Manual Reset Input with One-Shot Pulsed Reset Output ● Two Reset Timeout Period Options (150ms min or 1200ms min) ● Immune to Short Voltage Transients ● Low Supply Current (3µA at VCC = +1.8V) ● RESET Valid to VCC = +1V ● Active-Low Open-Drain and Push-Pull RESET Output Options ● -40°C to +125°C Operating Temperature Range ● Small 4-Pin SC70 and SOT143 Packages ● No External Components Required ● Pin Compatible with MAX811, MAX6315, MAX6384, and MAX6386 ● AEC-Q100 Qualified, Refer to Ordering Information for Specific /V Parts Ordering Information appears at end of data sheet. Typical Operating Circuit +1.0V TO +5.5V VCC Applications ● ● ● ● ● ● ● ● ● ● VCC MAX6467 MAX6468 Cell Phones/PDAs Embedded Control Systems Industrial Equipment Automotive Products Portable/Battery-Powered Equipment Medical Devices DSL Modems MP3 Players GPS Systems Digital Cameras MR RESET GND RESET INPUT µP GND 19-2523; Rev 8; 7/21 ©  2021 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. One Analog Way, Wilmington, MA 01887 U.S.A. | Tel: 781.329.4700 | © 2021 Analog Devices, Inc. All rights reserved. MAX6467/MAX6468 Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset Absolute Maximum Ratings VCC to GND..........................................................-0.3V to +6.0V RESET to GND Open-Drain........................................................-0.3V to +6.0V Push-Pull............................................... -0.3V to (VCC + 0.3V) MR to GND................................................ -0.3V to (VCC + 0.3V) Input/Output Current (all pins).............................................20mA Continuous Power Dissipation (TA = +70°C) 4-Pin SC70 (derate 3.1mW/°C above +70°C)..............245mW 4-Pin SOT143 (derate 4mW/°C above +70vC)............320mW Operating Temperature Range.......................... -40°C to +125°C Storage Temperature Range............................. -65°C to +150°C Junction Temperature.......................................................+150°C Lead Temperature (soldering, 10s).................................. +300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Electrical Characteristics (VCC = +1.2V to +5.5V, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1) PARAMETER Operating Voltage Range Supply Current SYMBOL VCC ICC CONDITIONS MIN VTH VCC Reset Delay tRD VCC Reset Timeout Period tRP MAX TA = 0°C to +125°C 1.0 5.5 TA = -40°C to 0°C 1.2 5.5 VCC = +5.5V, no load 7 13 VCC = +3.6V, no load 6 11 VCC = +2.5V, no load 4 8 VCC = +1.8V, no load VCC Reset Threshold (See the Reset Threshold Table) TYP 3 7.5 VTH +1.5% TA = +25°C -1.5% TA = -40°C to +85°C -2.5% +2.5% -3% +3% TA = +85°C to +125°C VCC falling at 10mV/µs from VTH + 100mV to VTH - 100mV 35 UNITS V µA V µs D3 option 150 225 300 D7 option 1200 1800 2400 ms MR Timeout Period tMRP D3 and D7 options 150 225 300 ms MR Rising Debounce Period (Note 2) tDEB D3 and D7 options 150 225 300 ms VIL MR Input Voltage VIH VIL VIH VTH < +4V VTH ≥ +4V MR Minimum Input Pulse 0.3 x VCC 0.7 x VCC 0.8 V 2.4 1 µs MR Glitch Rejection 100 ns MR to RESET Delay 200 ns MR Pullup Resistance RESET Output High (MAX6468 Only) www.analog.com MR to VCC VOH 500 VCC ≥ +2.5V, ISOURCE = 500µA, RESET not asserted 0.8 x VCC VCC ≥ +4.5V, ISOURCE = 800µA, RESET not asserted 0.8 x VCC 1560 3000 Ω V Analog Devices │  2 MAX6467/MAX6468 Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset Electrical Characteristics (VCC = +1.2V to +5.5V, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1) PARAMETER SYMBOL RESET Output Low CONDITIONS VOL RESET Output Leakage Current (MAX6467 Only) ILKG MIN TYP MAX VCC ≥ +1V, ISINK = 80µA, RESET asserted 0.3 VCC ≥ +2.5V, ISINK = 1.2mA, RESET asserted 0.3 VCC ≥ +4.5V, ISINK = 3.2mA, RESET asserted 0.3 RESET not asserted UNITS V 1 µA Note 1: Specifications over temperature are guaranteed by design. Production testing at TA = +25°C only. Note 2: The MR input ignores falling edges that occur within the MR rising debounce period (tDEB) after MR first rises from low to high (after a valid MR reset assertion). This prevents invalid reset assertion due to switch bounce. Typical Operating Characteristics (VCC = +5V, MAX6468US29D3 device, TA = +25°C, unless otherwise noted.) 6 5 4 3 VCC = +2.5V 4 3 MAX6467 toc03 VCC = VTH + 100mV TO VTH - 100mV 24 22 20 18 16 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 -40 -25 -10 5 20 35 50 65 80 95 110 125 SUPPLY VOLTAGE (V) TEMPERATURE (°C) RESET TIMEOUT PERIOD vs. TEMPERATURE NORMALIZED RESET THRESHOLD vs. TEMPERATURE OUTPUT VOLTAGE LOW vs. SINK CURRENT 208 207 206 205 204 203 202 201 -40 -25 -10 5 20 35 50 65 80 95 110 125 TEMPERATURE (°C) www.analog.com 1.010 600 550 500 450 1.005 1.000 0.995 0.990 -40 -25 -10 5 20 35 50 65 80 95 110 125 TEMPERATURE (°C) MAX6467 toc06 TEMPERATURE (°C) NORMALIZED RESET THRESHOLD (V) RESET TIMEOUT PERIOD (ms) 5 0 -40 -25 -10 5 20 35 50 65 80 95 110 125 209 200 6 VCC TO RESET DELAY vs. TEMPERATURE 1 MAX6467 toc04 210 7 2 VCC = +1.8V 1 0 8 26 VOL (mV) 2 9 VCC TO RESET DELAY (µs) 7 MAX6467 toc02 VCC = +3.6V SUPPLY CURRENT vs. SUPPLY VOLTAGE MAX6467 toc05 8 VCC = +5.5V 10 SUPPLY CURRENT (µA) SUPPLY CURRENT (µA) 9 MAX6467 toc01 10 SUPPLY CURRENT vs. TEMPERATURE VCC = 5.0V 400 350 300 250 200 150 100 50 0 0 1 2 3 4 5 6 7 8 9 10 ISINK (mA) Analog Devices │  3 MAX6467/MAX6468 Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset Typical Operating Characteristics (VCC = +5V, MAX6468US29D3 device, TA = +25°C, unless otherwise noted.) 4.5 4.0 VOH (V) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 1 2 3 4 5 6 7 400 300 200 RESET ASSERTS ABOVE THIS LINE 100 0 10 20 30 MR TO RESET DELAY vs. TEMPERATURE 40 50 60 PROPAGATION DELAY (WITH 100mV OVERDRIVE) MAX6467 toc10 MAX6467 toc09 MR TO RESET DELAY (ns) 500 RESET THRESHOLD OVERDRIVE (mV) ISOURCE (mA) 120 600 0 8 MAXIMUM TRANSIENT DURATION vs. RESET THRESHOLD OVERDRIVE MAX6467 toc08 VCC = +5.0V 5.0 MAXIMUM TRANSIENT DURATION (µs) 5.5 MAX6467 toc07 OUTPUT VOLTAGE HIGH vs. SOURCE CURRENT 115 110 3.0V VCC 100mV/div AC-COUPLED 105 100 95 2.8V 90 3V 85 80 75 70 65 60 RESET 1V/div 0 -40 -25 -10 5 20 35 50 65 80 95 110 125 TEMPERATURE (°C) RESET PULLUP AND PULLDOWN RESPONSE MAX6467 toc11 CRESET = 47pF, RPULLUP = 100kΩ, VPULLUP = 1.6V 4µs/div RESET TIMEOUT PERIOD MAX6467 toc12 3.3V 1.675V VCC 200mV/div 1.475V VCC 2V/div 0 1.6V 3.3V RESET 500mV/div MAX6467_S16D3-T 40µs/div www.analog.com RESET 2V/div 0 0 40ms/div Analog Devices │  4 MAX6467/MAX6468 Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset Pin Configurations TOP VIEW GND 1 RESET 2 MAX6467XS MAX6468XS 4 VCC GND 1 3 MR RESET 2 MAX6467US MAX6468US 4 VCC 3 MR SOT143 SC70 Pin Description PIN NAME 1 GND FUNCTION Ground Reset Output. RESET is an active-low open-drain (MAX6467) or push-pull (MAX6468) output. RESET asserts low when VCC drops below the selected threshold and remains low for the VCC reset timeout period after VCC rises above the threshold. The RESET one-shot asserts low for a fixed MR reset timeout period on the falling edge of the manual reset input. The open-drain output requires an external pullup resistor. 2 RESET 3 MR Manual Reset Input. Drive MR low to initiate a reset output. MR controls an edge-triggered one-shot that asserts RESET low for a fixed MR timeout period when MR is driven low. Internal timing circuitry ignores switch close and open bounce to ensure proper one-shot reset timing. 4 VCC Power-Supply Input. VCC provides power to the device and is also a monitored voltage. When VCC drops below the selected threshold, RESET asserts low and remains low for the reset timeout period after VCC rises above the threshold. For better noise immunity, bypass VCC to GND with a 0.1µF capacitor. www.analog.com Analog Devices │  5 MAX6467/MAX6468 Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset VCC VTH GND SWITCH BOUNCE MR SWITCH BOUNCE SWITCH BOUNCE GND RESET tRP tMRP tDEB tMRP GND Figure 1. Timing Diagram Detailed Description Reset Output The MAX6467 provides an active-low open-drain RESET output. The MAX6468 provides an active-low push-pull RESET output. RESET asserts low if VCC drops below the selected threshold or if a falling edge occurs on MR. RESET remains low for the VCC reset timeout period after VCC increases above the threshold voltage or is one-shot pulsed low for the MR timeout period after a falling edge on MR. Manual Reset Input Many µP-based products require manual reset capability, allowing the operator, a test technician, or external logic circuitry to initiate a reset. A falling edge on MR asserts www.analog.com RESET low. RESET is one-shot pulsed low for the MR timeout period after a falling edge on MR. An internal 1.5kΩ pullup resistor to VCC allows MR to be left unconnected if not used. MR can be driven with TTL or CMOSlogic levels, or with open-drain/collector outputs. Connect a normally open momentary pushbutton switch from MR to GND to realize a manual reset function. External debounce circuitry is not required, as the MAX6467/ MAX6468 respond to the first falling edge on MR and ignore subsequent falling edges within the reset timeout period and during the MR debounce period (see Figure 1). After MR goes high for 150ms (tDEB), the manual reset one-shot is ready to trigger a reset on the next MR falling edge. Connect a 0.1µF capacitor from MR to GND when using long cables to provide additional noise immunity. Analog Devices │  6 MAX6467/MAX6468 Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset Reset Timeout Delay* RESET TIMEOUT SUFFIX VCC RESET TIMEOUT PERIOD (min/max) (ms) MR TIMEOUT PERIOD (min/max) (ms) MR RISING DEBOUNCE PERIOD (min/max) (ms) D3 150/300 150/300 150/300 D7 1200/2400 150/300 150/300 *Additional reset timeout options may be available. Contact factory for availability. Applications Information Falling VCC Transients In addition to issuing a reset to the µP during power-up, power-down, and brownout conditions, the MAX6467/ MAX6468 are relatively immune to short-duration falling VCC transients (glitches). The Typical Operating Characteristics section shows the Maximum Transient Duration vs. VCC Overdrive for which the MAX6467/ MAX6468 do not generate a reset pulse. This graph was generated using a falling pulse applied to VCC starting above the actual reset threshold and ending below the threshold by the magnitude indicated (VCC Overdrive). The graph indicates the typical maximum pulse width a falling VCC transient can have without initiating a reset pulse. As the magnitude of the transient increases (goes farther below the reset threshold), the maximum allowable pulse width decreases. A 0.1µF bypass capacitor from VCC to GND provides additional transient immunity. Ensuring a Valid RESET Output Down to VCC = 0V The MAX6467/MAX6468 guarantee proper operation down to VCC = +1V. In applications that require valid reset levels down to VCC = 0V, a pulldown resistor to active-low outputs (MAX6468 only, Figure 3) ensures that RESET remains valid while the RESET output can no longer sink current. This scheme does not work with the open-drain outputs of the MAX6467. Ensure that the resistor value used does not overload the RESET output when VCC is above the reset threshold. For most applications, use 100kΩ to 1MΩ. VCC MAX6467 MAX6468 1.5kΩ VCC MR VCC MR ONE-SHOT/ DEBOUNCE MAX6468 RESET R1 100kΩ VCC RESET TIMEOUT PERIOD RESET OUTPUT RESET GND 1.23V GND Figure 2. Functional Diagram Figure 3. RESET Valid to VCC = 0V Chip Information TRANSISTOR COUNT: 748 PROCESS: BiCMOS www.analog.com Analog Devices │  7 MAX6467/MAX6468 Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset Standard Versions Reset Threshold (-40°C to +85°C) PART TOP MARK MAX6467XS16D3 AGL MAX6467XS22D3 AGM MAX6467XS26D3 AGN MAX6467XS29D3 AGO MAX6467XS46D3 AGP MAX6467US16D3 KAFN MAX6467US22D3 KAFO MAX6467US26D3 KAFP MAX6467US29D3 KAFQ MAX6467US46D3 KAFR MAX6468XS16D3 AGQ MAX6468XS22D3 AGR MAX6468XS26D3 AGS MAX6468XS29D3 AGC MAX6468XS46D3 AGB MAX6468US16D3 KAFS MAX6468US22D3 KAFT MAX6468US26D3 KAFU MAX6468US29D3 KAEW MAX6468US46D3 KAFV www.analog.com SUFFIX VTH (min) VTH (typ) VTH (max) 46 4.509 4.625 4.741 45 4.388 4.500 4.613 44 4.266 4.375 4.484 43 4.193 4.300 4.408 42 4.095 4.200 4.305 41 3.998 4.100 4.203 40 3.900 4.000 4.100 39 3.803 3.900 3.998 38 3.705 3.800 3.895 37 3.608 3.700 3.793 36 3.510 3.600 3.690 35 3.413 3.500 3.588 34 3.315 3.400 3.485 33 3.218 3.300 3.383 32 3.120 3.200 3.280 31 2.998 3.075 3.152 30 2.925 3.000 3.075 29 2.852 2.925 2.998 28 2.730 2.800 2.870 27 2.633 2.700 2.768 26 2.559 2.625 2.691 25 2.438 2.500 2.563 24 2.340 2.400 2.460 23 2.255 2.313 2.370 22 2.133 2.188 2.242 21 2.048 2.100 2.153 20 1.950 2.000 2.050 19 1.853 1.900 1.948 18 1.755 1.800 1.845 17 1.623 1.665 1.707 16 1.536 1.575 1.614 Analog Devices │  8 MAX6467/MAX6468 Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset Ordering Information PART TEMP RANGE Package Information PINPACKAGE MAX6467XS_ _D_-T -40°C to +125°C 4 SC70-4 MAX6467XS_ _D_/V+T* -40°C to +125°C 4 SC70-4 MAX6467XS29D3/V+T -40°C to +125°C 4 SC70-4 MAX6467XS32D3/V+T -40°C to +125°C MAX6467XS16D3/V+T For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. 4 SC70-4 PACKAGE TYPE PACKAGE CODE OUTLINE NO. -40°C to +125°C 4 SC70-4 4 SC70 X4+1 21-0098 LAND PATTERN NO. 90-0187 MAX6467US_ _D_-T -40°C to +125°C 4 SOT143-4 4 SOT143 U4+1 21-0052 90-0183 MAX6468XS_ _D_-T -40°C to +125°C 4 SC70-4 MAX6468US_ _D_-T -40°C to +125°C 4 SOT143-4 Note: Insert reset threshold suffix (see Reset Threshold table) after XS or US. Insert reset timeout delay (see Reset Timeout Delay table) after D to complete the part number. Sample stock is generally held on standard versions only (see Standard Versions table). Standard versions have an order increment requirement of 2500 pieces. Nonstandard versions have an order increment requirement of 10,000 pieces. Contact factory for availability. Devices are available in both leaded and leadfree packaging. Specify lead-free by replacing “T” with “+T” when ordering. T = Tape and reel. /V denotes an automotive qualified part. +Denotes a lead(Pb)-free/RoHS-compliant package. *Future product—contact factory for availability. www.analog.com Analog Devices │  9 MAX6467/MAX6468 Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset Revision History REVISION NUMBER REVISION DATE 2 3/14 Added /V OPNs 1 4/14 Removed automotive reference from Applications section 1 6/14 Reversed 4/14 change and added automotive reference back to Applications section 1 4 10/14 Fixed typo in Package Information section 9 5 10/15 Fixed MR Pullup Resistance specification in Electrical Characteristics table 6 3/18 Updated Benefits and Features and Ordering Information table 3 6.1 DESCRIPTION Reformatted Standard Versions table 7 3/20 Updated Features, Absolute Maximum Ratings, Detailed Description, Applications Information, and Package Information table 8 7/21 Updated Ordering information table PAGES CHANGED 2 1, 9 8 1, 2, 6, 7, 9 9 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use.Specifications subject to change without notice. No license is granted by implicationor otherwise under any patent or patent rights of Analog Devices. Trademarks andregistered trademarks are the property of their respective owners. w w w . a n a l o g . c o m Analog Devices │  10
MAX6468US46D3+T 价格&库存

很抱歉,暂时无法提供与“MAX6468US46D3+T”相匹配的价格&库存,您可以联系我们找货

免费人工找货