MAXREFDES100HDK#

hSENSOR PLATFORM Quick and Easy Evaluation of Custom Health Sensor Applications Designing a custom wearable product can be complex. The MAXREFDES100 Health Sensor (hSensor) Platform eliminates the extra time it typically takes to develop a prototype, so you can quickly evaluate and validate the right solution for your health sensor application. The platform supports the measurement of motion, precision skin temperature, bio-potential measurements (including ECG, EMG, and EEG) and reflective PPG (including pulse oximetry and heart-rate). MAXREFDES100 includes an hSensor board, complete firmware with drivers, a debugger board, and a graphical user interface (GUI). It is ideal for development of highend health, wellness, and fitness applications, such as chest straps, ECG patches, wrist-worn devices, thermometers, disposable temperature patches, blood oxygen measurement, smart weigh scales, and bio authentication. The entire platform is optimized to maximize battery life in a tiny 7.75cm2 footprint, ideal for the latest wearable applications. 25.4mm 30.5mm TOP SIDE KEY PRODUCTS Part Number MAX30003 MAX30205 Description Ultra-low power, singlechannel, integrated biopotential analog front-end (AFE) MAX30101 High-sensitivity, pulse oximeter and heart-rate sensor MAX30205 Industry’s only clinical grade temperature sensor MAX32620 Ultra-low power ARM® Cortex®-M4F microcontroller optimized for wearables MAX14720 Industry’s lowest quiescent current PMIC MAXREFDES100 hSensor Platform for medical, fitness, and wearable applications KEY ADVANTAGES Order CLINICAL GRADE TEMPERATURE SENSOR MAX30003 MAX30101 BIOPOTENTIAL AFE PULSE OXIMETER AND HEART RATE SENSOR 3-AXIS ACCELEROMETER HR DETECTION ALGORITHM (R-R) MAX32620 ARM CORTEX-M4F MCU 32MB FLASH MEMORY 6 DoF ACCELEROMETER/ GYROSCOPE BLUETOOTH® LOW ENERGY BAROMETRIC PRESSURE SENSOR MAX14720 ULTRA-LOW IQ POWER MANAGEMENT IC USB TYPE-C • Complete, flexible solution—Supports development of a wide variety of health and fitness sensor applications • Saves design time—Fully working hardware and firmware allows you to quickly validate your concept • Fast time to market—Build on top of existing hardware and firmware to quickly validate your hardware design • Easy to use—PC GUI and Android application available; Powered by USB connection or coin cell battery; Data stored on an external flash drive or streamed via Bluetooth for low energy October 31, 2016 1-LEAD ECG BATTERY RELATED RESOURCES MAXREFDES100 on ARM® mbed™ Quick Start Guide and Design Files hSensor Platform Enables Quick and Easy Design for Wearable Health and Fitness Applications Maxim Integrated www.maximintegrated.com © Maxim Integrated Products, Inc. All rights reserved. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc., in the United States and other jurisdictions throughout the world. All other marks are the property of their respective owners.