MXL1014CN

Not Recommended for New Designs This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains available for existing users. A Maxim replacement or an industry second-source may be available. Please see the QuickView data sheet for this part or contact technical support for assistance. For further information, contact Maxim’s Applications Tech Support. 19-0133; Rev. 3; 4/98 Dual/Quad Precision Op Amps ____________________________Features The Maxim MXL1013 is a precision dual op amp that upgrades the performance of popular devices such as the MC1458/MC1558, LM158 and OP221. The Maxim MXL1014 is a precision quad op amp that directly upgrades designs in the industry-standard 14-pin DIP configuration and has specifications similar to the LT1013. The MXL1013 and MXL1014 are pin compatible with industry standards such as the LT1013 and LT1014. Precision specifications include: 40µV offset voltage, 0.3µV/°C drift (TCVOS), 117dB CMRR, and 120dB PSRR. While supply current is typically only 350µA per amplifier, the outputs can source and sink more than 20mA. Both the MXL1013 and the MXL1014 can be operated from a single +5V power supply. The input voltage range includes ground and the outputs swing to within a few millivolts of ground. ♦ Single-Supply Operation Input Voltage Range Extends to Ground Output Swings to Ground while Sinking Current ♦ 150µV Max Offset Voltage ♦ Low Drift: 2µV/°C Max ♦ 0.8nA Max Offset Current ♦ Guaranteed High Gain 5mA Load Current: 1.5 Million Min 17mA Load Current: 0.8 Million Min ♦ 500µA Max Supply Current per Amplifier ♦ Low Voltage Noise: 0.1Hz to 10Hz, 0.55µVp-p ♦ Lower Current Noise than OP07: 0.07 pA/√Hz Ordering Information PART ________________________Applications Battery-Powered Precision Instrumentation Strain-Gauge Signal Conditioners Thermocouple Amplifiers Instrumentation Amplifiers TEMP. RANGE PIN-PACKAGE MXL1013CN8 0°C to +70°C 8 Plastic DIP MXL1013DN8 0°C to +70°C 8 Plastic DIP MXL1013DS8 0°C to +70°C 8 SO MXL1013DC/D 0°C to +70°C Dice* 4mA to 20mA Current-Loop Transmitters MXL1013IN8 -40°C to +85°C 8 Plastic DIP Multiple-Limit Threshold Detection MXL1013IS8 -40°C to +85°C 8 SO Active Filters MXL1013AMJ8 -55°C to +125°C 8 CERDIP** Multiple Gain Blocks MXL1013MJ8 -55°C to +125°C 8 CERDIP** Ordering Information continued on last page. * Dice are specified at TA = +25°C, D.C. parameters only. **Contact factory for availability and processing to MIL-STD-883. Pin Configurations TOP VIEW OUTA 1 16 OUTD INA- 2 15 IND- 14 IND+ 13 V- 12 INC+ 11 INC- OUTB 7 10 OUTC N.C. 8 9 N.C. A INA+ 1 MXL1013 8 INA- V- 2 A 7 OUTA INB+ INB- 6 3 4 B 5 V+ OUTB SO OUTA+ 1 INA- 2 INA+ V- MXL1013 V+ 7 OUTB 6 3 B 5 4 INA+ 3 8 A D INBINB+ DIP NOTE: SO PIN CONFIGURATION DIFFERS FROM DIP. V+ 4 MXL1014 INB+ 5 INB- 6 B C Wide SO Pin Configurations continued on last page. _________________________________________________________________ Maxim Integrated Products For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800. For small orders, phone 1-800-835-8769. 1 MXL1013/MXL1014 General Description MXL1013/MXL1014 Dual/Quad Precision Op Amps ABSOLUTE MAXIMUM RATINGS Supply Voltage.....................................................................±22V Input Voltage ............................Equal to Positive Supply Voltage ........................5V Below Negative Supply Voltage Output Short-Circuit Duration.....................................Continuous Differential Input Voltage .....................................................±30V Continuous Power Dissipation (TA = +70°C) 8-Pin Plastic DIP (derate 9.09mW/°C above +70°C)......727mW 8-Pin SO (derate 5.88mW/°C above +70°C) ..................471mW 8-Pin CERDIP (derate 8.00mW/°C above +70°C) ..........640mW 14-Pin Plastic DIP (derate 10.00mW/°C above +70°C)..800mW 14-Pin CERDIP (derate 9.09mW/°C above +70°C) ........727mW 16-Pin Wide SO (derate 9.52mW/°C above +70°C).......762mW Operating Temperature Ranges: MXL1013/MXL1014C_ ........................................0°C to +70°C MXL1013/MXL1014I_.......................................-40°C to +85°C MXL1013/MXL1014AM_,M_ ..........................-55°C to +125°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10sec) .............................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (Note 1) (VS = ±15V, VCM = 0V, TA = +25°C, unless otherwise noted.) PARAMETER Input Offset Voltage SYMBOL VOS MXL1013AM MXL1014AM MIN TYP MAX MXL1013C/D/I/M MXL1014C/D/I/M MIN TYP MAX MXL1013 40 150 60 300 MXL1014 50 180 60 300 200 800 CONDITIONS MXL101_D/I Long-Term Input Offset Voltage Stability Input Offset Current 0.4 0.5 µV µV/Mo. IOS 0.15 0.80 0.2 1.5 nA Input Bias Current IB 12 20 15 30 nA Input Noise Voltage en Input Noise-Voltage Density en Input Noise-Current Density in Large-Signal Voltage Gain 0.1Hz to 10Hz 0.55 0.55 fO = 10Hz 24 24 fO = 1000Hz 22 22 0.07 0.07 pA/√Hz 300 MΩ 4 GΩ fO = 10Hz Differential Input Resistance (Note 2) 100 Common mode AVOL 400 70 5 VO = ±10V, RL = 2kΩ 1.5 8.0 1.2 7.0 VO = ±10V, RL = 600Ω 0.8 2.5 0.5 2.0 +13.5 +13.8 +13.5 +13.8 -15.0 -15.3 -15.0 -15.3 Common-Mode Rejection Ratio 100 117 97 114 µVp-p nV/√Hz V/µV Input Voltage Range 2 UNITS V CMRR VCM = +13.5V, -15.0V _______________________________________________________________________________________ dB Dual/Quad Precision Op Amps MXL1013/MXL1014 ELECTRICAL CHARACTERISTICS (continued) (Note 1) (VS = ±15V, VCM = 0V, TA = +25°C, unless otherwise noted.) PARAMETER Power-Supply Rejection Ratio SYMBOL PSRR Channel Separation Output Voltage Swing VOUT MXL1013AM MXL1014AM MIN TYP MAX MXL1013C/D/I/M MXL1014C/D/I/M MIN TYP MAX VS = ±2V to ±18V 103 120 100 117 dB VO = ±10V, RL = 2kΩ 123 140 120 137 dB RL = 2kΩ ±13 ±14 ±12.5 ±14 V 0.2 0.4 0.2 0.4 V/µs CONDITIONS Slew Rate Supply Current Note 1: Note 2: IS Per amplifier 0.35 0.50 0.35 0.55 UNITS mA When amplifier is sinking current at the output a minimum load of 1kΩ is recommended. Guaranteed by design. ELECTRICAL CHARACTERISTICS (Note 1) (VS+ = +5V, VS- = 0V, VOUT = +1.4V, VCM = 0V, TA = +25°C, unless otherwise noted.) PARAMETER Input Offset Voltage SYMBOL VOS MXL1013AM MXL1014AM MIN TYP MAX MXL1013C/D/I/M MXL1014C/D/I/M MIN TYP MAX MXL1013 60 250 90 450 MXL1014 70 280 90 450 250 950 CONDITIONS MXL101_D/I Input Offset Current Input Bias Current Large-Signal Voltage Gain Supply Current µV IOS 0.2 1.3 0.3 2.0 nA IB 15 35 18 50 nA AVOL VO = 5mV to 4V, RL =500Ω Input Voltage Range Output Voltage Swing UNITS VOUT IS 1.0 1.0 +3.5 +3.8 +3.5 +3.8 0 -0.3 0 -0.3 V/µV V Output low, no load 15 25 15 25 Output low, 600Ω to ground 5 10 5 10 220 350 220 350 Output low, ISINK = 1mA Output high, no load 4.0 4.4 4.0 4.4 Output high, 600Ω to ground 3.4 4.0 3.4 4.0 Per amplifier mV V 0.31 0.45 0.32 0.50 mA _______________________________________________________________________________________ 3 MXL1013/MXL1014 Dual/Quad Precision Op Amps ELECTRICAL CHARACTERISTICS (Note 1) (VS = ±15V, VCM = 0V, TA = -40°C to +85°C for MXL1013I and MXL1014I, TA = 0°C to +70°C for MXL1013C/D and MXL1014C/D, unless otherwise noted.) PARAMETER Input Offset Voltage Input Offset-Voltage Drift Input Offset Current Input Bias Current SYMBOL VOS TCVOS IOS IB CONDITIONS MXL101_C 80 400 MXL101_D/I 230 1000 MXL101_C: VS = 5V, 0V, VO = 1.4V 110 570 MXL101_D/I: VS = 5V, 0V; VO =1.4V 280 1200 (Note 2) 0.4 2.5 MXL101_D/I (Note 2) 0.7 5.0 0.3 2.8 0.5 6.0 16 38 24 90 UNITS µV µV/°C nA VS = 5V, 0V; VO = 1.4V VS = 5V, 0V; VO = 1.4V nA Large-Signal Voltage Gain AVOL VO = ±10V, RL = 2kΩ 0.7 4.0 V/µV Common-Mode Rejection Ratio CMRR VCM = +13.0V, -15.0V 94 113 dB VS = ±2V to ±18V 97 116 dB ±12.0 ±13.9 V Power-Supply Rejection Ratio PSRR RL = 2kΩ Output Voltage Swing Supply Current per Amplifier 4 MXL1013C/D/I MXL1014C/D/I MIN TYP MAX VOUT IS VS = 5V,0V, RL = 600Ω Output low Output high 6 3.2 13 3.9 mV V 0.37 0.60 0.34 0.55 mA VS = 5V, 0V, VO = 1.4V _______________________________________________________________________________________ Dual/Quad Precision Op Amps (VS = ±15V, VCM = 0V, TA = -55°C to +125°C, unless otherwise noted.) PARAMETER SYMBOL Input Offset Voltage VOS Input OffsetVoltage Drift TCVOS Input Offset Current IOS Input Bias Current MXL1013AM MIN TYP MAX MXL1014AM MIN TYP MAX MXL1013M MXL1014M MIN TYP MAX 80 300 90 350 110 550 TA = -55°C to +100°C (Note 3) 80 450 90 480 100 750 TA = +125°C, VCM = 0.1V 120 450 150 480 200 750 TA = +125°C, VCM = 0V 250 900 300 960 400 1500 0.4 2.0 0.4 2.0 0.5 2.5 0.3 2.5 0.3 2.8 0.4 5.0 0.6 6.0 0.7 7.0 0.9 10.0 15 30 15 30 18 45 20 80 25 90 28 120 CONDITIONS VS = 5V, 0V, VO = 1.4V (Note 2) µV µV/°C nA VS = 5V, 0V; VO = 1.4V IB UNITS nA VS = 5V, 0V; VO = 1.4V Large-Signal Voltage Gain AVOL VO = ±10V, RL = 2kΩ 0.5 2.0 0.4 2.0 0.25 2.0 V/µV CommonMode Rejection Ratio CMRR VCM = +13.0V, -14.9V 97 114 96 114 94 113 dB Power-Supply Rejection Ratio PSRR VS = ±2V to ±18V 100 117 100 117 97 116 dB RL = 2kΩ Output Voltage Swing Supply Current per Amplifier VOUT VS = 5V,0V, RL = 600Ω to ground ±12.0 ±13.8 Output low Output high 6 3.2 ±12.0 ±13.8 15 3.8 6 3.2 ±11.5 ±13.8 15 3.8 6 3.1 V 18 3.8 mV V 0.38 0.60 0.38 0.60 0.38 0.70 0.34 0.55 0.34 0.55 0.34 0.65 IS mA VS = 5V, 0V; VO = 1.4V Note 1: When amplifier is sinking current at the output, a minimum load of 1kΩ is recommended. Note 2: Guaranteed by design. Note 3: This parameter is guaranteed by design and is not tested. _______________________________________________________________________________________ 5 MXL1013/MXL1014 ELECTRICAL CHARACTERISTICS (Note 1) __________________________________________Typical Operating Characteristics (TA = +25°C, unless otherwise noted.) COMMON-MODE REJECTION RATIO vs. FREQUENCY POWER-SUPPLY REJECTION RATIO vs. FREQUENCY VS = ±15V 60 VS = +5V,0V 40 20 0 10 100 1k 10k 100k 100 NEGATIVE SUPPLY 80 POSITIVE SUPPLY 60 40 VS = ±15V+1Vp-p SINE WAVE 20 0 0.1 1M 1 10 FREQUENCY (Hz) 100 1k 10k 100k 1M 380 NOISE SPECTRUM 340 260 -50 GAIN, PHASE vs. FREQUENCY VS = ±2V TO ±18V 20 VOLTAGE GAIN (dB) 100 CURRENT NOISE VOLTAGE NOISE 120 120 100 ±15V 10 0 140 ±15V GAIN 160 +5V, 0V +5V, 0V 180 200 1k 0.1 0.3 FREQUENCY (Hz) 6 3 10 8 100 125 80 60 VS = +5V,0V VS = ±15V 40 -20 0.01 0.1 1 10 100 1k 10k 100k 1M 10M FREQUENCY (Hz) SMALL-SIGNAL TRANSIENT RESPONSE (VS = ±15V) VOLTAGE (5V/div) LARGE-SIGNAL TRANSIENT RESPONSE (VS = ±15V) 10 TIME (2µs/div) TIME (sec) AV = +1 6 1 VOLTAGE (20mV/div) 4 75 CL = 100pF FREQUENCY (MHz) 0.1Hz to 10Hz NOISE 50 0 -10 10 100 25 20 1/f CORNER 2Hz 2 0 VOLTAGE GAIN vs. FREQUENCY PHASE SHIFT (DEGREES) 300 0 -25 140 VCM =0V CL = 100pF 100 PHASE 10 VS = +5V, 0V 300 TEMPERATURE (°C) 80 1 VS = ±15V FREQUENCY (Hz) 1000 30 420 VOLTAGE GAIN (dB) 80 460 SUPPLY CURRENT PER AMPLIFIER (µA) 100 VOLTAGE NOISE DENSITY (nV/√Hz) CURRENT NOISE DENSITY (fA/√Hz) SUPPLY CURRENT vs. TEMPERATURE 120 POWER-SUPPLY REJECTION RATIO (dB) COMMON-MODE REJECTION RATIO (dB) 120 NOISE VOLTAGE (200nV/div) MXL1013/MXL1014 Dual/Quad Precision Op Amps TIME (50µs/div) AV = +1 ______________________________________________________________________________________ Dual/Quad Precision Op Amps SMALL-SIGNAL TRANSIENT RESPONSE (VS = 5V, 0V) LARGE-SIGNAL TRANSIENT RESPONSE (VS = 5V, 0V) LARGE-SIGNAL TRANSIENT RESPONSE (VS = 5V, 0V) 4V 4V 2V 2V 0v 0v 100mV 50mV 0v TIME (20µs/div) TIME (10µs/div) TIME (10µs/div) AV = +1 RL = 4.7kΩ to 5V AV = +1 RL = 600Ω to GND AV = +1 No load _____Pin Configurations (continued) OUTA 1 14 OUTD INA- 2 13 IND- INA+ 3 12 IND+ V+ 4 11 V- INB+ 5 A D MXL1014 10 INC+ INB- 6 9 INC- OUTB 7 8 OUTC B C ___________________Chip Topography 0.099" (2.514 mm) OUTA V+ OUTB DIP _Ordering Information (continued) PART TEMP. RANGE PIN-PACKAGE 0°C to +70°C 14 Plastic DIP MXL1014DS 0°C to +70°C 16 Wide SO MXL1014DN 0°C to +70°C 14 Plastic DIP MXL1014IN -40°C to +85°C 14 Plastic DIP MXL1014IS -40°C to +85°C 16 Wide SO MXL1014AMJ -55°C to +125°C 14 CERDIP** MXL1014MJ -55°C to +125°C 14 CERDIP** MXL1014CN INA- INB- INA+ INB+ 0.085" (2.16 mm) V- **Contact factory for availability and processing to MIL-STD-883. _______________________________________________________________________________________ 7 MXL1013/MXL1014 ____________________________Typical Operating Characteristics (continued) _______________________________________________________Package Information PDIPN.EPS MXL1013/MXL1014 Dual/Quad Precision Op Amps Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 8 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 © 1998 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.