MB6S

MB2S SINGLE PHASE 0.5 AMPS. GLASS PASSIVATED BRIDGE RECTIFIERS Voltage Range 200 to 1000 Volts Current 0.5 Amperes MBS Features *Ideal for printed circuit board .193(4.90) .177(4.50) .033(0.84) .022(0.56) .157(4.00) .142(3.60) ~ + ~ .276(7.0) MAX Lead: Reliable low cost construction utilizing molded plastic technique *High surge current capability *High temperature soldering guaranteed: 260OC / 10 seconds at 5 lbs.,(2.3kg) tension *Small size,simple installation *Leads solderable per MIL-STD-202 Method 208 .102(2.60) .087(2.20) .106(2.70) .090(2.30) .053(1.53) .037(0.95) .014(0.35) .006(0.15) .008(0.20) .118(3.0) MAX MAX .083(2.12) .043(1.10) .043(1.10) .028(0.70) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% MB2S MB4S mb4s 400 280 400 MB6S mb6s 600 420 600 0.5 0.8 IFSM VF IR CJ R*JA TJ TSTG 35 1.0 5.0 100 15 75 -55 to +150 -55 to +150 o o MB8S mb8s 800 560 800 MB10S mb10s 1000 700 1000 Type Number Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximunm Average Forward Rectified Current at TA = 30oC On glass-epoxy P.C.B. On aluminum substrate Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method) Maximum Instantaneous Forward Voltage Drop Per Leg@0.4A Maximun DC Reverse Current TA = 25 C o at Rated DC Blocking Voltage TA = 100 C Typical Junction Capacitance Per Leg (Note3) Typical Thermal Resistance Per Leg Operating Temperature Range Storage Temperature Range o UNITS V V V A mb2s VRRM VRMS VDC IF(AV) 200 140 200 A V uA uA pF C/W o o C C Note:1.On glass epoxy P.C.B mounted on 0.05x 0.05"(1.3x1.3mm)pads 2.On aluminum substrate P.C.B with on area of 0.8"x 0.8"(20x20mm) mounted on 0.05x 0.05"(1.3x1.3mm)solder pad 3.Measured at 1.0MHz and applied reverse valtage of 4.0 volts.