MPSH10

Order this document by MPSH10/D VHF/UHF Transistors NPN Silicon COLLECTOR 3 1 BASE 2 EMITTER MPSH10 MPSH11 Motorola Preferred Devices MAXIMUM RATINGS Rating Collector – Emitter Voltage Collector – Base Voltage Emitter – Base Voltage Total Device Dissipation @ TA = 25°C Derate above 25°C Total Device Dissipation @ TC = 25°C Derate above 25°C Operating and Storage Junction Temperature Range Symbol VCEO VCBO VEBO PD PD TJ, Tstg Value 25 30 3.0 350 2.8 1.0 8.0 – 55 to +150 Unit Vdc Vdc Vdc mW mW/°C Watts mW/°C °C 1 2 3 CASE 29–04, STYLE 2 TO–92 (TO–226AA) THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Case Symbol RqJA RqJC Max 357 125 Unit °C/W °C/W ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector – Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) Collector – Base Breakdown Voltage (IC = 100 mAdc, IE = 0) Emitter – Base Breakdown Voltage (IE = 10 mAdc, IC = 0) Collector Cutoff Current (VCB = 25 Vdc, IE = 0) Emitter Cutoff Current (VEB = 2.0 Vdc, IC = 0) V(BR)CEO V(BR)CBO V(BR)EBO ICBO IEBO 25 30 3.0 — — — — — 100 100 Vdc Vdc Vdc nAdc nAdc MPSH10 MPSH11 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued) Characteristic Symbol Min Max Unit ON CHARACTERISTICS DC Current Gain (IC = 4.0 mAdc, VCE = 10 Vdc) Collector – Emitter Saturation Voltage (IC = 4.0 mAdc, IB = 0.4 mAdc) Base – Emitter On Voltage (IC = 4.0 mAdc, VCE = 10 Vdc) hFE VCE(sat) VBE(on) 60 — — — 0.5 0.95 — Vdc Vdc SMALL– SIGNAL CHARACTERISTICS Current – Gain — Bandwidth Product (IC = 4.0 mAdc, VCE = 10 Vdc, f = 100 MHz) Collector–Base Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Common–Base Feedback Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Collector Base Time Constant (IC = 4.0 mAdc, VCB = 10 Vdc, f = 31.8 MHz) MPSH10 MPSH11 rb’Cc fT Ccb Crb 0.35 0.6 — 0.65 0.9 9.0 ps 650 — — 0.7 MHz pF pF MPSH10 MPSH11 PACKAGE DIMENSIONS NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.115 ––– 0.135 ––– MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 2.93 ––– 3.43 ––– A R P SEATING PLANE B F L K D XX G H V 1 J C N N SECTION X–X DIM A B C D F G H J K L N P R V CASE 029–04 (TO–226AA) ISSUE AD STYLE 2: PIN 1. BASE 2. EMITTER 3. COLLECTOR