W04

W005 • • • • THRU W10 1.5Amp Glass Passivated Bridge Rectifier 50 to 1000 Volts WOM A B Features High Current Capability Ideal for printed circuit boards High Temperature Soldering: 260 oC for 10 seconds Reliable low cost construction technique results in inexpensive products • • • Maximum Ratings Operating Temperature: -55°C to +150 °C Storage Temperature: -55°C to +150 °C For capacitive load. Derate current by 20% Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V D MCC Part Number W 005 W01 W02 W04 W06 W08 W10 Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V C F AC - Electrical Characteristics @ 25° C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage IF(AV) IFSM VF 1.5 A 50A 1.10V 10µA 500uA TC = 50°C E + AC E 8.3ms, half sine IFM = 1.0A; TC = 25°C TC = 25°C TC = 125°C DIM A B C D E F DIMENSIONS INCHES MIN ------1.000 1.200 .180 .030 MM MIN ----------25.40 30.50 4.60 0.76 IR MAX .358 .225 ----.220 .032 MAX 9.10 5.70 ----5.60 0.81 NOTE W005G thru W10G 50 FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 1.6 1.4 1.2 1.0 .8 .6 .4 .2 0 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE 40 30 20 10 0 1 2 10 20 40 60 100 20 40 60 80 100 o 120 140 160 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE. ( C) FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 20 10 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 10 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) Tj=100 0C 1.0 Tj=25oC Pulse Width=300 s 1% Duty Cycle 1.0 0.1 .10 Tj=25 0C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 .01 0 20 40 60 80 100 120 140 FORWARD VOLTAGE. (V) PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)