4117AZ1012VDC1.2

4117 Open Type>>>>>Dust Covered >> 13.2×14×18 Features Superminiature, heavy power. Low coil power consumption. Switching current up to 2×10A. PC board mounting. Suitable for household appliance, electrical equipment, automation system, and automobile industry application. 18×16.4×20 Ordering Information 4117 C S 10 12VDC 1.0 4 Contact Current：10:10A；20:20A 5 Coil rated Voltage(V)：DC:3,5,6,9,12,18,24 6 Coil power consumption：1.0:1.0W ；1.2:1.2W 1 2 3 4 5 6 1 Part number：4117 2 Contact arrangement：A:1A；B:1B；C:1C；U:IU；W:1W 3 Enclosure：S: Sealed type；Z: Dust cover O: open type Contact Data Contact Arrangement Contact Material Contact Rating (resistive) 1A SPSTNO f1C SPDT(B-M) f1U SPSTNODM f1W Ag SnO2 1Af1C: 10A/120VAC,28VDC 20A/14VDC ; 1U: 2×10A/120VAC,28VDC 2×20A/14VDC ; 1W: 2×10A/120VAC,28VDC 2×20A/14VDC 1C: 280W 1200VA 1W: 2y280W 2y1200VA 75VDC 380VAC Max. Switching Current:20A 50m Item 3.12 of IEC255-7 105 Item 3.30 of IEC255-7 107 Item 3.31 of IEC255-7 SPDTNC-NO Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation Electrical life Mechanical Coil Parameter Coil voltage VDC Pickup voltage VDC(max) (75%of rated voltage ) 2.25 3.75 4.50 6.75 9.00 13.5 18.0 9.00 release voltage VDC(min) (10% of rated voltage) 0.3 0.5 0.6 0.9 1.2 1.8 2.4 1.2 1.2 10 5 1.0 10 5 Dash Numbers Coil resistance ±10% Coil power consumption W Operate Time ms Release Time ms Rated 003-1000 005-1000 006-1000 009-1000 012-1000 018-1000 024-1000 012-1200 3 5 6 9 12 18 24 12 Max. 3.9 6.5 7.8 11.7 15.6 23.4 31.2 15.6 9 25 36 85 145 324 576 120 CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. 115 www.dblectro.com 4117 Operation condition Insulation Resistance Dielectric Strength Between contacts Between contact and coil Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 100M min (at 500VDC) Item 7 of IEC255-5 Item 6 Item 6 1.27mm of IEC255-5 of IEC255-5 50Hz 750V 50Hz 1500V 100m/s2 11ms 10~40Hz double amplitude 10N 235’x2’ 3x0.5s -40~85’ 85% (at 40’) 9g(Open type) 12g IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 IEC68-2-3Test Ca Qualification inspection: Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24. Dimensions (Unit: mm) mm 0.3 0.4 0.5 0.6 0.8 1.0 1.3 2.1 3.3 3.4 3.81 4.6 5.08 8.89 10.16 13.2 14 16.4 18 20 >àçÇá Mounting (Bottomz views) Dimensions Wiring diagram (Bottom views) 0.012 0.016 0.020 0.024 0.031 0.039 0.051 0.083 0.130 0.134 0.150 0.181 0.200 0.350 0.400 0.520 0.511 0.646 0.709 0.787 NOTES 1).Dimensions are in millimeter. 2).Inch equivalents are given for general information only. Reference Data www.dblectro.com