BTP-183GBCQ-XX-08

BriLux 1W Light Source BTP-183XXCQ-XX-XX Package Dimension [Note 1] Features Highest Lumen Per Watt Long Operational Life More Energy Efficient IC Compatible Low DC Voltage Superior ESD Protection Smallest Footprint Applications Accent Lighting Automotive Exterior/Interior Light High Power Back Light Reading Light Marine/Miner’s Lighting Portable Lighting Tolerance: ± see spec Unit: mm Optical Characteristics at Ta=25ºC, IF=300mA PART NUMBER LED CHIP MATERIAL Lens Color Water Clear Water Clear Water Clear Wavelength/CCT Range (nm/K) Drive Voltage Luminous VIEW ANGLE Flux @300mA(lm) 2θ1/2 Typ. 8 lm 8 lm 20 lm (deg) Min/Max 460~475 475~485 5000K 8000K Typ. 3.40V 3.40V 3.40V BTP-183BLCQ-XX-08 BTP-183GBCQ-XX-08 BTP-183WHCQ-XX-20 AlInGaN AlInGaN AlInGaN 60 60 60 Note: 1) Picture for illustration purpose only. Please refer to outline dimension for actual package size. DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Light Source BTP-183XXCQ-XX-XX Absolute Maximum Ratings at Ta=25ºC Parameter White/Blue DC Forward Current (mA)[1] Peak Pulsed Forward Current (mA) Average Forward Current (mA) Reverse Voltage (V) LED Junction Temperature (°C) [3] Thermal Resistance without heatsink (°C/W) Storage Temperature (°C) Operating Temperature (°C) 300 500 300 5 120 80 -20 to +80 -10 to +70 Application Notes: 1. Proper forward current must be observed to maintain the junction temperature below maximum rating 2. Although all products listed are class one ESD protection (+/- 1KV by HBM mode), care must be fully taken when handling products 3. Specification is subjected to change without notice. DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Light Source BTP-183XXCQ-XX-XX Typical Electro-Optical Characteristics Curves at Ta=25ºC DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Light Source BTP-183XXCQ-XX-XX Note: The recommended maximum reflow temperature is less than 220ºC Recommended Soldering Pattern BT-Rev. 1.0a Specifications are subject to change without notice. Copyright © 2003 Brilliance Technologies Co., Ltd. All rights reserved. DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com