BTP-87XXCG-XX-XX

BriLux 1W Emitter BTP-87XXCG-XX-X/X Package Dimension Features Highest Lumen Per Watt Long Operational Life White or Black Housing Superior ESD Protection Instant Light (less than 100ns) Compatible to Luxeon’s “Batwing” Applications Accent Light/Down Light/Spot Light Automotive Exterior/Interior Light Large Area LCD Backlights Reading Light Marine/Miner’s Lighting Portable Flashlight/ General Lighting Tolerance: ± see spec Unit: mm Optical Characteristics at TJ=25ºC, IF=350mA PART NUMBER Emitting Color LED Chip Material Lens Color Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Wavelength (nm) CCT (K) Range Min BTP-87NRCG-XX-X/X BTP-87AMCG-XX-X/X BTP-87YECG-XX-X/X BTP-87BLCG-XX-X/X BTP-87PGCG-XX-X/X Normal Red Amber Yellow Blue Green AlInGaP AlInGaP AlInGaP AlInGaN AlInGaN AlInGaN AlInGaN 620 610 585 460 515 2800K 5000K Max 630 620 595 475 535 3800K 8000K Drive Voltage @ 350mA Typ. 2.20V 2.20V 2.20V 3.50V 3.20V 3.50V 3.50V Luminous Flux (lm) @350mA Typ. 27 lm 30 lm 25 lm 7 lm 25 lm 20 lm 25 lm VIEW ANGLE 2θ1/2 (deg) 90 90 90 90 90 90 90 BTP-87WWCG-XX-X/X Warm White BTP-87WHCG-XX-X/X Notes: 1) 2) 3) 4) Picture for illustration purpose only. White Please refer to outline dimension for actual package size. Flux is measured with the accuracy of ±15%. Please refer to Flux Selection Guide CCT is measured with the accuracy of ± 400K. Please refer to CCT Selection Guide VF is measured with the accuracy of ± 0.15V. Please refer to VF Selection Guide Part No.: BTP-87XXCG-XX-X/X Page 1 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Batwing Emitter BTP-87XXCG-XX-X/X Absolute Maximum Ratings at TJ=25ºC Parameter Red/Amber/Yellow White/Blue/Green Power Dissipation (W) DC Forward Current (mA) [1] [4] 0.77 350 1000 350 5 50 2,000 [3] 1.22 350 1000 350 5 50 2,000 125 15 -2 -40 to +120 -30 to +110 Peak Pulsed Forward Current (mA) Average Forward Current (mA) Reverse Voltage (V) Reverse Current (uA) ESD Sensitivity (V) [2] LED Junction Temperature at 350mA (°C) Temperature Coefficient of VF (mV/°C) Storage Temperature (°C) Operating Temperature (°C) Lead Soldering Temperature (°C)[4] 125 15 -2 -40 to +120 -30 to +110 Thermal Resistance Junction to Board (°C/W) 240°C for 5 seconds max 240°C for 5 seconds max Application Notes: 1. 2. 3. 4. 5. Proper forward current must be observed to maintain the junction temperature below maximum rating Although all products listed are class one ESD protection (+/- 2KV by HBM mode), care must be fully taken when handling products Specification is subjected to change for improvements without notice. Test conditions: tp≤10us, duty cycle = 0.005 CAUTION: When lighting up, the emitter will become very hot if it is not attached to a heat sink. Please provide proper heat management to prevent damage to the emitter. Part No.: BTP-87XXCG-XX-X/X Page 2 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Batwing Emitter BTP-87XXCG-XX-X/X CCT, Flux and VF Selection Guide (@ IF=350mA) BTP-87XXCG-XX-X/W/B White Housing (Optional: B=Black) Wavelength Ranks Selection Flux Ranks Selection Color Bin B5 B6 B7 XX G6 G7 G8 G9 XX XX XX XX λD(nm) Min Max 460 465 465 470 470 475 460 – 475 515 520 520 525 525 530 530 535 515 – 535 620 – 630 610 – 620 585 – 595 Color Bin H J K X M Flux (lumens) 4.5~6 6~8 8~10 Default Full Range 14~18 18~23 23~30 30~39 39~50 Default Full Range Blue Blue Green Red Amber Yellow Red Amber Yellow Green White N P Q R X CCT Ranks Selection VF Ranks Selection Color Red Amber Yellow Color Temp Warm White Bin 00 01 XX 02 03 04 XX CCT(K) Min Max 2800 3300 5000 6000 7000 3300 3800 6000 7000 8000 Bin V04 V05 V06 V07 VXX(Full) V08 V09 V10 V11 V12 VXX(Full) VF (V) Min Max 2.0 2.2 2.2 2.4 2.4 2.6 2.6 2.8 2.0~2.8 2.8 3.0 3.0 3.2 3.2 3.4 3.4 3.6 3.6 3.8 2.8~3.8 2800K – 3800K White 5000K – 8000K White Blue Green (Please specify on order, otherwise, default full range of VF) Part No.: BTP-87XXCG-XX-X/X Page 3 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Batwing Emitter BTP-87XXCG-XX-X/X Typical Radiation Pattern for Batwing Emitter Fig. 1 Typical Radiation Pattern Fig. 2 Forward Current vs Ambient Temperature Part No.: BTP-87XXCG-XX-X/X Page 4 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Batwing Emitter BTP-87XXCG-XX-X/X G Fig. 3. Forward Current vs Forward Voltage Fig. 4 Forward Current vs Luminous Flux Part No.: BTP-87XXCG-XX-X/X Page 5 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Batwing Emitter BTP-87XXCG-XX-X/X Important Notes: The information contained herein is presented only as a Guide for the application of our products. Brilliance Technologies assumes no responsibility for any infringement of intellectual property or other rights of the third parties which may result from its use. Brilliance Technologies continually improves the quality of our products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsible of the customer, when using Brilliance Technologies products, to comply with the standard of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such Brilliance Technologies products cause loss of human life, bodily injury or damage to property. Brilliance Technologies products listed in this data sheet are intended for usage in general electronics and/or non-commercial or industrial lighting products. These products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury. In developing your design, please ensure that Brilliance Technologies products are used within specified operating ranges as set forth in the most recent Brilliance Technologies data sheets. BT-Rev. 1.0B20040917 Specifications are subject to change for improvement without notice. Copyright © 2003 Brilliance Technologies Co., Ltd. All rights reserved. Part No.: BTP-87XXCG-XX-X/X Page 6 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com