NG8N

NG8N on Pending 14.3×7.5×13.8 Features Small size, light weight. Low coil consumption. Switching capacity up to 25A motor lock load High performance PCB relay Suitable for household electrical appliance, automation system Ordering Information NG8N 1S C DC12V 0.80 1 2 3 4 5 3 Contact arrangement：C:1C 4 Coil rated Voltage(V)：DC:12 5 Coil power consumption：0.64:0.64W ；0.80:0.80W 1 Part number：NG8N 2 Sensitivity：1:Standard；1S:High sensitivity 1L:High temperature； 1H:High temperature/High sensitivity Contact Data Contact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation life Electrical Mechanical 1C SPDT(B-M) Ag SnO2 25A motor load (14VDC) 480W 16VDC 250mV (at 10A 105 106 Max. Switching Current:30A Item 3.12 of IEC255-7 Item 3.30 of IEC255-7 Item 3.31 of IEC255-7 Coil Parameter Coil voltage VDC Model Rated 1 1S 1L IH 12 12 12 12 Max. 16 16 16 16 225 180 225 180 7.2 6.5 7.2 6.5 release voltage VDC(min) (8.3% of rated voltage) 1.0 1.0 1.0 1.0 Coil resistance ±10% Pickup voltage VDC(max) Coil power consumption W Operate Time ms Release Time ms 0.64 0.80 0.64 0.80 10 5 CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. 149 www.dblectro.com NG8N Operation condition Insulation Resistance Dielectric Strength Between contacts Between contact and coil Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 100M min (at 500VDC) Item 7 of IEC255-5 Item 6 Item 6 of IEC255-5 of IEC255-5 50Hz 500V 50Hz 1000V 980m/s2 11ms 10Hz~500Hz acceleration 43.1m/s2 5N 235’x2’ 3x0.5s -40~85’(1LfIH 105’) 85% (at 40’) 4.1g IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 IEC68-2-3 Test Ca Qualification inspection: Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24. Dimensions (Unit: mm) mm 0.3 0.4 0.6 0.9 1.0 1.2 1.6 2.5 3.5 4.0 4.8 7.5 8.4 13.8 14.3 >àçÇá Mounting (Bottom views) Wiring diagram Dimensions (Bottom views) 0.012 0.016 0.024 0.035 0.039 0.047 0.063 0.098 0.138 0.157 0.189 0.295 0.331 0.543 0.563 NOTES 1).Dimensions are in millimeter. 2).Inch equivalents are given for general information only. www.dblectro.com