NG8QNCS10DC12V0.69

NG8QN 16.0×12.5×14.4 on Pending Features Small size, light weight. Low coil consumption. PC board mounting. Suitable for household electrical appliance, automobile system, windowfwipe motor ,hours, doorlock Ordering Information NG8QN C S 10 DC12V 0.69 1 2 3 4 5 6 4 Contact rating：10A/14VDC 5 Coil rated Voltage(V)：DC:12 6 Coil power consumption：0.69:0.69W 1 Part number：NG8QN 2 Contact arrangement：C:1C 3 Enclosure：S: Sealed type；NIL: Dust cover Contact Data Contact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation life Electrical Mechanical 1C SPDT(B-M) Ag CdO Ag SnO2 5A, 10A/14VDC inrush current 30A (L/R=7mS; 15mS max) 150W 16VDC Max. Switching Current:30A 100m Item 3.12 of IEC255-7 250mV(at10A) Item 3.12 of IEC255-7 105 Item 3.30 of IEC255-7 107 Item 3.31 of IEC255-7 Coil Parameter Coil voltage VDC Pickup voltage VDC(max) (61%of rated voltage ) 7.3 012-690 12 16 210 9.0(at 80’) 0.9 0.69 release voltage VDC(min) (7.5% of rated voltage) Dash numbers Coil resistance ±10% Coil power consumption W Operate Time ms Release Time ms Rated Max. 10 5 CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. 85 www.dblectro.com NG8QN Operation condition Insulation Resistance Dielectric Strength Between contacts Between contact and coil Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 20M min (at 500VDC) Item 7 of IEC255-5 Item 6 Item 6 1.5mm of IEC255-5 of IEC255-5 50Hz 500V 50Hz 500V 100m/s2 11ms 10~55Hz double amplitude 5N 235’x2’ 3x0.5s -40~85’ 85% (at 40’) 5.5g IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 IEC68-2-3Test Ca Qualification inspection: Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24. Dimensions (Unit: mm) mm 0.3 0.4 0.5 1.0 1.2 1.3 1.5 1.6 2.5 3.5 10 10.2 12.5 14.4 15.3 16.0 >àçÇá Mounting (Bottom views) Dimensions Wiring diagram (Bottom views) 0.012 0.016 0.020 0.039 0.047 0.051 0.059 0.062 0.098 0.138 0.394 0.401 0.492 0.480 0.602 0.630 NOTES 1).Dimensions are in millimeter. 2).Inch equivalents are given for general information only. www.dblectro.com