NSAM2CS109VDC

NSAM 23.1×17.2×16.2 Features Switching capacity up to 20A. PC board mounting. Suitable for automobile auxiliary. Ordering Information NSAM 2C S 15 1 2 3 4 12VDC 5 3 Enclosure：S: Sealed type；Z: Dust cover 4 Contact Current：7A,10A,15A,20A 5 Coil rated Voltage(V)：DC:3,5,6,9,12,18,24 1 Part number：NSAM 2 Contact arrangement：2A:2A；2C:2C； Contact Data Contact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation Electrical life Mechanical 2A DPSTNO f2C DPDT(B-M) Ag SnO2 NO: 15A,20A/15VDC, 10A,15A/24VDC,125VAC ; NC: 10A,15A/15VDC,125VAC; 7A,10A/24VDC 300W 2000VA 30VDC 220VAC Max. Switching Current:20A 50m Item 3.12 of IEC255-7 105 Item 3.30 of IEC255-7 107 Item 3.31 of IEC255-7 Coil Parameter Coil voltage VDC Pickup voltage VDC(max) (75%of rated voltage ) 3.75 4.50 6.75 9.00 13.5 18.0 release voltage VDC(min) (5% of rated voltage) 0.25 0.30 0.45 0.60 0.90 1.20 0.45 10 5 Dash numbers Coil resistance ±10% Coil power consumption W Operate Time ms Release Time ms Rated 005-450 006-450 009-450 012-450 018-450 024-450 5 6 9 12 18 24 Max. 6.5 7.8 11.7 15.6 23.4 31.2 56 80 180 320 720 1280 CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. 123 www.dblectro.com NSAM Operation condition Insulation Resistance Dielectric Strength Between contacts Between contact and coil Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 100M min (at 500VDC) Item 7 of IEC255-5 Item 6 Item 6 1.5mm of IEC255-5 of IEC255-5 50Hz 500V 50Hz 1000V 100m/s2 11ms 10~55Hz double amplitude 5N 235’x2’ 3x0.5s -30~80’ 85% (at 45’) 15g IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 IEC68-2-3Test Ca Qualification inspection: Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24. Dimensions (Unit: mm) mm 0.4 1.0 1.2 1.25 1.3 2.6 3.0 3.5 4.0 5.3 6.0 6.1 8.0 11 11.6 16.2 17.2 23.1 >àçÇá Dimensions Mounting (Bottom views) 2C 2A Wiring diagram(Bottom views) 0.016 0.039 0.047 0.049 0.051 0.102 0.118 0.138 0.157 0.209 0.236 0.240 0.315 0.433 0.457 0.638 0.677 0.909 NOTES 1).Dimensions are in millimeter. 2).Inch equivalents are given for general information only. Reference Data www.dblectro.com