Présente / Presents:
DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com
NHG RELAYS
NVF4-6
NVF4-6
34.5 32.5 34
Features
Miniature. Contact load capacity up to 150A. Suitable for automobile. Terminal types as inserting.
Operation condition
Insulation Resistance1) Dielectric Strength1) Between contacts Between contact and coil Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 100M m in (at 500VDC) Item 7 of IEC255-5
50Hz 750V 50Hz 1000V 147m/s2 11ms 10~40Hz double amplitude 1.5mm 30N 235 2 3 0.5s -40~125 85% (at 40 ) 65g IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua2 IEC68-2-20 Test Ta method 1 IEC68-2-3 Test Ca
Note: 1). When testing, coil terminals should be connected ,If coil transient suppression is installed in relay .
Qualification inspection:
Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24.
Ordering Information
Dimensions
5 6 7 8
3 4.5max. 32.5max.
1.279max. 1.358max.
mm /inch
35 Max. 1.378max. 33 Max. 1.300max.
N VF4-6 C Z 50 a DC12V N D
1
1 2 3 4 5
2
3
4
1.339max.
0.3
0.453 0.012
0.039
1
0.181
4.6
0.8
0.031
6.3
0.248
9.0
0.354
Contact Data
Contact Arrangement Contact Material Contact Rating (resistive) 1A SPSTNO ,1C AgSnO 2 , AgNi 1A 100A,150A/12VDC SPDT(B-M) 1C NO: 50A/24VDC,100A/12VDC NC: 80A,100A/12VDC
0.8 0.031
9.5 0.374
11.5 0.453 15.5 0.610
11.5
35 Max. 0.610max.
34.0max.
Part number NVF4-6 Contact arrangement A:1A C:1C Enclosure S: Sealed type Z: Dust cover Contact Current 50A,100A Terminals a: plug in type
6 Coil rated voltage(V) DC:12,24 7 Contact material N:AgNi NIL: AgSnO 2 8 Coil transient suppression: D: with diode.; 2D:with two diodes.;. R: with resistance.; DR: with diode and resistance; NIL: standard
9 0.354
1.2 0.047
50A Dimensions
100A
Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation life Electrical Mechanical
1800W M ax. Switching Current:150A 75VDC 3 0m Item 3.12 of IEC255-7 200mV (at Contact rating) 10 5 Item 3.30 of IEC255-7 10 7 Item 3.31 of IEC255-7
Coil Parameter
0.331
Dash numbers
Rated
Max.
Coil resistance 10%
Coil power consumption W
Operate Time ms
Release Time ms
Wiring diagram (Bottom view)
0.331
012-2900 024-2900
12 24
15.6 31.2
50 195
7.8 15.6
1.2 2.4
2.9
10
5
NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only.
0.661
Mounting (Bottom view)
CAUTION: 1 .The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.
N ingbo Huaguan Relay Corporation LTD.
0.315
Coil voltage VDC
Pickup voltage VDC(max) (65%of rated voltage )
Release voltage VDC(min) (10% of rated voltage)
0.705
0.354
