Présente / Presents:
DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com
NHG RELAYS
P
P
R
C haracteristics
Electrostatic capacitance Between open Contacts Between coil & Contacts Between Contact Poles Insulation Resistance Dielectric Strength Between open Contacts Between coil & Contacts Between Contact Poles Surge Withstand Voltage Between open Contacts Between coil & Contacts Between Contact Poles Shock resistance 1000VAC 1min 1000VAC 1min 1000VAC 1min 1500V 1500V 2500V Functional:500m/s 2 11ms; Survival:1000 m/s2 6ms 10~55Hz Double amplitude Functional 3mm Survival:5mm 5N 235 2 3 0.5s -40~70 (-40~158 F) 1.5g Item 6 of IEC255-5 Item 6 of IEC255-5 Item 6 of IEC255-5 FCC68 FCC68 FCC68 IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 Approx.0.4pF Approx.0.9pF Approx.0.2pF 1 000M m in (at 500VDC) Item 3.41 of IEC255-7 Item 3.41 of IEC255-7 Item 3.41 of IEC255-7 Item 7 of IEC255-5
1 4.0 9.0 5.0
R5604271 C US E158859 Patent No 02217796.5
Features
DIL Pitch Terminals .High Sensitivity :0.14W or 0.10W Nominal Power Conforms to FCC Part 68 1.5kV Surge and Dielectric 1000VAC Monostable or bistable relays Single and double Coil magnet latching Type available Application for Telecommunication Equipment,Office Equipment,Security Alarm Systems, Measuring instruments, Medical Monitoring Equipment,Audio Visual Equipment, Flight Simulator,Sensor Control
Ordering Information
P
L
12 W
3 Coil rated voltage(V) DC:3,4.5,5,6,9,12,24 4 Contact material NIL: AgPd W: AgNi
1 2 3 4 1 Part number P 2 Operating function NIL: Single Side Stable L:1 Coil Latching; K:2 Coil Latching
Vibration resistance Terminals strength Solderability Temperature Range Mass
Contact Data
C ontact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage C ontact Resistance or V oltage drop Operation life Electrical M echanical 2C DPDT(B-M) Bifurcated Crossbar AgPd(Stationary Contact: Gold clad ) AgNi(Gold clad 1A,2A/30VDC; 0.5A/125VAC 60W 62.5VA M in. Switching load 0.01mA/10mV Reference Value 220VDC 250VAC M ax. Swit ching Curr ent:2A 5 0m 1 A/30VDC 2 10 5 Ag Ni 1 10 5 0 .5A/125VAC 1 10 5 10 8 Item 3.12 of IEC255-7 Item 3.30 of IEC255-7 Item 3.31 of IEC255-7 DC or peak AC open circuit are not
Qualification inspection:
P erform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24.
Safety approvals
Safety approval Load UL&CUR 1A,2A/30VDC, 0.5A/125VAC TU V 1A/30VDC, 0.5A/125VAC
CAUTION:
R elays previously tested or used above 10mA resistive at 6V maximum recommended for subsequent use in low level applications.
Dimensions
mm/inch
C oil Parameter
Dash numbers
P-003 P -004 P-005 P-006 P-009 P-012 P-024
Rated
3 4.5 5 6 9 12 24 3 4.5 5 6 9 12 24 3 4.5 5 6 9 12 24
Max.
7.5 11.25 12.5 15.0 22.5 30.0 48.0 8.7 13.0 14.5 17.4 26.1 34.8 57.6
Coil resistance 10%
64.3 144.6 178 257 579 1028 2880 90 202.5 250 360 810 1440 3840
S et Coil Reset Coil
Index Mark
9max. 0.354max.
Coil voltage VDC
5 +0.4 0.197 +0.016
3.5 0.187
Pick up voltage VDC(max) (75%of rated voltage )
2.25 3.38 3.75 4.50 6.75 9.00 18.0 2.25 3.38 3.75 4.50 6.75 9.00 18.0 2.25 3.38 3.75 4.50 6.75 9.00 18.0
Release voltage VDC(min) (10% of rated voltage)
0.3 0.45 0.5 0.6 0.9 1.2 2.4
Coil power W
0.14 0.14 0.14 0.14 0.14 0.14 0.20 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.30
Operate Time ms
Release /Reset Time ms
4.75 0.187
0.5 0.02
0.25 0.01
Approx.2
Approx.1
14max. 0.55max.
2.54 0.1
7.62 0.3
Dimensions Reset
1 Single Side stable 2 3 4 5 1 SR S R S: Set R: Reset (Bottom View) 1 Coil latching 2 3 4 5 1 2 Coil latching 2 3 4 5
2.54 0.1 2.54 0.1
1 Coil Latching
P L-003 P L-004 PL-005 PL-006 PL-009 PL-012 PL-024
Reset(Max)
-2.25 -3.38 -3.75 -4.50 -6.75 -9.00 -18.0
Approx.2
Approx.1
2 Coil Latching
PK-003 PK-004 PK-005 PK-006 PK-009 PK-012 PK-024 6 9 10 12 18 24 36
R eset(Max)
2.25 3.38 3.75 4.50 6.75 9.00 18.0
Reset
10
9
8
7
6
10
9
8
7
6
10
9
8
7
6
10- 1 0.04
45 101 125 180 405 720 1920
45 101 125 180 405 720 1920
Index mark (De-energized Position)
Index mark (Reset Position)
Index mark (Reset Position)
Approx.2
Approx.1
Wiring diagram (Bottom view)
Tolerance: 0 .1/ 0.004
Mounting (Bottom view)
C AUTION: 1 .The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release(reset) voltage are for test purposes only and are not to be used as design criteria. 3.When latching relays are installed in equipment, the latch and reset coil should not be pulsed simultaneously. Coil should not be pulsed with less than the nominal coil voltage and pulse width should be a minimum of three times the specified operate time of the relay. If these conditions are not followed, it is possible for the relay to be in the magnetically neutral position .
NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only.
N ingbo Huaguan R elay Corporation LTD.
很抱歉,暂时无法提供与“P4W”相匹配的价格&库存,您可以联系我们找货
免费人工找货