FR3G

DC COMPONENTS CO., LTD. R FR3A THRU FR3K RECTIFIER SPECIALISTS TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE - 50 to 800 Volts CURRENT - 3.0 Amperes FEATURES * ldeal for surface mounted applications * Low leakage current * Glass passivated junction SMC ( DO-214AB ) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant *Terminals: Solder plated, solderable per M IL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Weight: 0.24 gram .128(3.25) .108(2.75) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current T A = 7 5oC Peak Forward Surge Current I FM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage at 3.0A DC Maximum DC Average Reverse Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time (Note 3) Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range @T A = 25 o C @T A = 125 o C VRRM VRMS VDC IO I FSM VF IR trr RθJL CJ T J , T STG FR3A 50 35 50 FR3B 100 70 100 FR3D 150 105 150 3.0 100 1.2 10 300 FR3G 200 140 200 FR3J 300 210 300 FR3K 400 280 400 UNITS Volts Volts Volts Amps Amps Volts uAmps 150 10 60 250 500 nSec 0 C/ W pF 0 -65 to + 175 C NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2. Thermal Resistance (Junction to Ambient), 0.4x0.4in2 (10.0X10.0mm2) copper pads to each terminal. 3. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A. 338 EXIT EXI BACK NEXT BACK EXIT NEXT BACK NEXT RATING AND CHARACTERISTIC CURVES ( FR3A THRU FR3K ) DC COMPONENTS CO., LTD. R 339 NEXT NEXT BACK BACK EXIT EXIT