MP801

DC COMPONENTS CO., LTD. R MP8005 THRU MP810 RECTIFIER SPECIALISTS TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 8.0 Amperes FEATURES * Surge overload rating: 125 Amperes peak * Low forward voltage drop * Small size: simple installation MP-6 METAL HEAT SINK MECHANICAL DATA * Case: Molded plastic with heatsink * Epoxy: UL 94V-0 rate flame retardant * Lead: MIL-STD-202E, Method 208 guaranteed * Polarity: Symbols molded or marked on body * Mounting position: Any * Weight: 6.1 grams .620(15.7) .580(14.7) AC AC .270(6.8) .230(5.8) .042(1.1) .039(1.0) .750 MIN (19.1) HOLE FOR NO.6 SCREW .445(11.3) .405(10.3) .620(15.7) .580(14.7) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. .445(11.3) .405(10.3) Dimensions in inches and (millimeters) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Current at TC = 7 5 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage Drop per element at 4.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage per element Operating Temperature Range Storage Temperature Range @T A = 25 oC @T C = 100 oC o MP8005 MP801 50 35 50 100 70 100 MP802 200 140 200 MP804 400 280 400 8.0 125 1.1 10 500 MP806 600 420 600 MP808 800 560 800 MP810 1000 700 1000 UNITS Volts Volts Volts Amps Amps Volts µAmps 0 0 VRRM VRMS VDC IO I FSM VF IR TJ TSTG -55 to +125 -55 to +150 C C RATING AND CHARACTERISTIC CURVES (MP8005 THRU MP810) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) 150 125 100 75 50 25 0 FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD OUTPUT CURRENT, (A) 10 8.3ms Single Half Sine-Wave (JEDEC Mathod) 8 S atHe 6 ink ting un Mo 4 2 Single Phase Half Wave 60Hz Inductive or Resistive Load PC Bo d ar M ou nt in g 1 2 5 10 20 50 100 0 50 100 150 NUMBER OF CYCLES AT 60Hz CASE TEMPERATURE, (oC) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (µA) INSTANTANEOUS FORWARD CURRENT, (A) 100 10 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS TJ=25oC 10 1.0 Pulse Width=300ms 1% Duty Cycle 1 .1 TJ=25oC .1 .6 .7 .8 .9 1.0 1.1 1.2 1.3 .01 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) DC COMPONENTS CO., LTD. R