S2D

DC COMPONENTS CO., LTD. R S2A THRU S2M RECTIFIER SPECIALISTS TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES * ldeal for surface mounted applications * Low leakage current * Glass passivated junction SMB ( DO-214AA ) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant *Terminals: Solder plated, solderable per M IL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Weight: 0.093 gram .083(2.11) .075(1.91) .185(4.70) .160(4.06) .060(1.52) .030(0.76) .220(5.59) .200(5.08) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. o Dimensions in inches and (millimeters) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 75 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 2.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time (Note 3) Typical Thermaesistance (Note 2) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range @T A = 25 o C @T A = 100 o C VRRM VRMS VDC IO I FSM VF IR trr R θJL CJ T J, T STG S2A 50 35 50 S2B 100 70 100 S2D 200 140 200 S2G 400 280 400 2.0 60 1.1 5.0 100 2.5 20 30 -65 to + 175 S2J 600 420 600 S2K 800 560 800 S2M 1000 700 1000 UNITS Volts Volts Volts Amps Amps Volts uAmps uSec 0 C/ W pF 0 C NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2. Thermal Resistance (Junction to Ambient), 0.2x0.2in2 (5X5mm2 ) copper pads to each terminal. 3. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A. 344 EXIT EXI BACK NEXT BACK EXIT NEXT BACK NEXT RATING AND CHARACTERISTIC CURVES ( S2A THRU S2M ) DC COMPONENTS CO., LTD. R 345 EXIT EXI BACK NEXT BACK EXIT NEXT BACK NEXT