SS310F

SS32F DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS SS320F TECHNICAL SPECIFICATIONS OF SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE - 20 to 200 Volts CURRENT - 3.0 Amperes FEATURES * * * * * ldeal for surface mounted applications Glass passivated junction Low leakage current Low power loss High efficiency SMAFL .043(1.1) .035(0.9) .007(0.2) .003(0.1) MECHANICAL DATA .192(4.9) .173(4.4) * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Terminals: Solder plated solderable per MIL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Weight: 0.03 gram .145(3.7) .129(3.3) .106(2.7) .094(2.4) .062(1.6) .051(1.3) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .047(1.2) .031(0.8) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL SS32F SS34F SS36F SS38F SS310F SS312F SS315F SS320F UNITS Maximum Recurrent Peak Reverse Voltage VRRM 20 40 60 80 100 120 150 200 Volts Maximum RMS Voltage VRMS 14 28 42 56 70 84 105 140 Volts VDC 20 40 60 80 100 120 150 200 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating Lead Temperature at TA = 75 o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 3.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage IO 3.0 Amps I FSM 70 Amps 0.55 VF @T A = 25 o C o 0.70 0.85 2.0 IR @T A = 100 C 0.95 Volts mAmps 10 Typical Thermal Resistance (Note 1) RθJA 55 Typical Junction Capacitance (Note 2) CJ 450 Operating Temperature Range TJ -55 to +125 0 C T STG -55 to +150 0 C Storage Temperature Range 0 C/ W pF NOTES : 1. Thermal Resistance (Junction to Ambient) 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. P.C.B. mounted with 0.5x0.5"(12.7x12.7mm 2 ) copper pad area. REV-3,MAR,2017 1 www.dccomponents.com RATING AND CHARACTERISTIC CURVES ( SS32F THRU SS320F ) FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 4.0 3.0 2.0 Single Phase Half Wave 60Hz Resistive of Inductive Load 1.0 0 0 25 50 75 100 125 150 175 LEAD TEMPERATURE, (oC) INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 20 SS32F~SS34F 10 SS36F~SS38F SS310F~SS312F SS315F~SS320F 1.0 o TJ= 25 C Pulse Width = 300µS 1% Duty Cycle .1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.3 TYPICAL REVERSE CHARACTERISTICS FIG.4 TYPICAL TRANSIENT THERMAL IMPEDANCE 1000 SS32F~SS34F SS36F~SS320F TRANSIENT THERMAL IMPEDANCE ( C/W) INSTANTANEOUS REVERSE CURRENT, (mA) 100 10 TJ= 100oC 1 0.1 TJ= 75oC 0.01 o TJ= 25 C 0 0 20 40 60 80 100 10 1.0 0 0.01 100 0.1 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) SS32F~SS38F SS310F~SS320F 40 TJ= 25oC 20 10 .1 .4 1.0 4 10 100 40 REVERSE VOLTAGE, (V) REV-3,MAR,2017 PEAK FORWARD SURGE CURRENT, (A) JUNCTION CAPACITANCE, (pF) 1000 100 80 60 10 100 t, PULSE DURATION (SEC) FIG.5 TYPICAL JUNCTION CAPACITANCE 500 1 FIG.6 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 80 SS32F~SS34F 60 40 SS36F~SS320F 20 At rated TL8.3ms Single Half Sine-Wave(JEDEC Method) 0 1 2 4 6 8 10 20 40 80 100 NUMBER OF CYCLE AT 60Hz 2 www.dccomponents.com Disclaimer Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold DC COMPONENTS are harmless against all damages. DC COMPONENTS disclaims any and all liability arising out of the application or use of any product, including consequential or incidental damages. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. DC COMPONENTS reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein , and disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Unless otherwise in writing, DC COMPONENTS products are intended for use as general electronic components in standard applications ( eg: Consumer electronic, Computer equipment, Office equipment, etc.), and not recommended for use in a high specific application where a failure or malfunction of the device could result in human injury or death ( eg: Aerospace equipment, Submarine cables, Combustion equipment, Safety devices, Life support systems, etc.) Customers using or selling DC COMPONENTS products not expressly indicated for use in such applications do so at their own risk. If customer intended to use DC COMPONENTS standard quality grade devices for applications not envisioned by DC COMPONENTS, please contact our sales representatives in advance. DC COMPONENTS CO., LTD. R REV-3,MAR,2017 3 www.dccomponents.com