17HE-B13150-84-FA

17HE Series RoHS Compliant MIL-C-24308-Compatible High-Density Crimp Type FEATURE ●High-density D-sub connector compatible to MIL-C-24308. It is called “high-density” because 9-con- tacts shell contains 15 contacts. ●Receptacles (socket contact) come in three types : conventional “L-shaped DIP type” , and space-sav- ing “L-shaped DIP type” and “SMT type” . ●The space-saving types are lower by 2mm in mounting height than the conventional type, and best suited to high-density mounting because the area (front and back) they occupy on PCB is smaller by 50% or 70% in the case of L-shaped DIP- or SMT-type, respectively, than conventional ones. ● Plug (pin contact) consists of crimp-type press-contacts, and is compatible with three types of cables (AWG 30, 28 and 26) and existing 17JE type hood. SPECIFICATION Voltage Rating Current Rating Dielectric Withstanding Voltage Insulation Resistance Contact Resistance Wire Accommodation 250V AC (r.m.s.) 1A/Contact 1,000V AC (r.m.s.)/for 1 minute 5,000MΩ min. at 500V DC 20mΩ max. AWG30, 28, 26, 24 InsulatorJacket Diam.φ0.8 to φ1.21 Ｌ 17HE MATERIAL/FINISH P/N Block Shell Contact Hood MATERIAL/FINISH PBT resin/(UL94V-0)/color black PPS resin/(UL94V-0)/color black Brass/Nickel Plating Copper alloy/Mating area : Gold over Nickel Plating, Tail area : Sn-Ag over Nickel Plating ABS resin/Nickel Plating Cautions about Use Use connector on a panel fixed on PCB by fastening it on the panel with small screws or engaging block 1 ●　 ● 17HE Series Unit : mm ■Receptacle Connector [Without Jack Socket] 17HE-R13150-73-FA CONNECTOR STYLE R : Right angle DIP type B : Space-Saving Right angle DIP type C : Space-Saving Right angle SMT type NO.OF.CONTACTS 15 CONTACT PLATENG 7 : Mating area : 0.4μm Gold over Nickel plating 　 Tail area : Sn-Ag over Nickel plating 8 : Mating area : Gold flash over Nickel plating 　 Tail area : Sn-Ag over Nickel plating Ground Tab Type P.C.B thickness N : None 1 : M3×0.5 tapping-hole ground tab 2 : φ3.4 through-hole ground tab 3 : M3×0.5 tapping-hole ground tab 4 : M2.6×0.45 tapping-hole ground tab 5 : Through-hole lock pin ground tab 6 : ♯4-4OUNC tapping-hole ground tab － － － t＝1.6 t＝1.6 t＝1.6 t＝1.6 ＋ 0.25 － 0.15 ＋ 0.25 － 0.15 ＋ 0.25 － 0.15 ＋ 0.25 － 0.15 0 :φ2.4 through-hole ground tab 4 : Lock Pin Ground Tab 5 : Lock Pin Ground Tab 6 : Lock Pin Ground Tab － t＝1.6 t＝1.2 t＝1.0 ＋0.25 －0.15 ±0.19 ±0.18 0 : φ2.4 through-hole ground tab 1 : Single Lock Pin Ground Tab 2 : Single Lock Pin Ground Tab 3 : Single Lock Pin Ground Tab － t＝1.6 t＝1.2 t＝1.0 ＋ 0.25 － 0.15 ± 0.19 ± 0.18 Ｌ 17HE 2 ●　 ● 17HE Series Unit : mm ■Receptacle Connector [With Jack Socket] 17HE-B13150-73HA2-CA CONNECTOR STYLE R : Right angle DIP type B : Space-Saving Right angle DIP type C : Space-Saving Right angle SMT type NO.OF.CONTACTS 15 CONTACT PLATENG 7 : Mating area : 0.4μm Gold over Nickel plating 　 Tail area : Sn-Ag over Nickel plating 8 : Mating area : Gold flash over Nickel plating 　 Tail area : Sn-Ag over Nickel plating Event that uses Jack Socket : CA METHOD OF DELIVERY (Jack Socket) 1 : With Jack socket (UN-assenbled) 2 : With Jack socket (assenbled) JACK SOCKET THREAD SIZE A : M2.6×0.45 (Standard) B : M3×0.5 C : ＃4-40UNC Ground Tab Type P.C.B thickness N : None 1 : M3×0.5 tapping-hole ground tab 2 : φ3.4 through-hole ground tab 3 : M3×0.5 tapping-hole ground tab 4 : M2.6×0.45 tapping-hole ground tab 5 : Through-hole lock pin ground tab 6 : ♯4-4OUNC tapping-hole ground tab － － － t＝1.6 t＝1.6 t＝1.6 t＝1.6 ＋ 0.25 － 0.15 ＋ 0.25 － 0.15 ＋ 0.25 － 0.15 ＋ 0.25 － 0.15 DIMENSION B, OF JACK SOCKET H : Jack Socket (17L-003X26-CF) (Panel thickness : 0.9～1.3mm) K : Jack Socket(17L-003X32-CF) (Panel thickness : 0.5～0.8mm) 0 : φ2.4 through-hole ground tab 4 : Lock Pin Ground Tab 5 : Lock Pin Ground Tab 6 : Lock Pin Ground Tab － t＝1.6 t＝1.2 t＝1.0 ＋0.25 －0.15 ±0.19 ±0.18 0 : φ2.4 through-hole ground tab 1 : Single Lock Pin Ground Tab 2 : Single Lock Pin Ground Tab 3 : Single Lock Pin Ground Tab － t＝1.6 t＝1.2 t＝1.0 ＋ 0.25 － 0.15 ± 0.19 ± 0.18 Ｌ 17HE 3 ●　 ● 17HE Series Unit : mm ■Right-Angle Receptacle Connector 12.5 7.8 10° 16.3 24.99 30.8 2.54 ± 0.05 15-φ1+0.1 -0 2-φ3.2 ± 0.1 φ5.5 Land 6.1 φ3.1 2.54 ± 0.05 0.25 ± 0.05 2.286 ± 0.05 1.143 ± 0.05 mating side 5 11.43 15.2 11.43 2.54 24.99 ± 0.05 2.54 3.2 24.99 3.2 P.C.B. Mounting Dimensions ( Connector Mounting Side) ■Space-Saving Right-Angle Receptacle Connector 2.5 Shell : φ3.1 Hole Ground tab : M3 × 0.5 thread 0.5 9 7.8 12 P/N 2.4 E 3.2 2.8 2.6 Mark A B C 17HE-B13150-□4-FA 17HE-B13150-□5-FA 17HE-B13150-□6-FA 16.3 24.99 30.8 8.6 4 6.17 φ2.4 Hole 24.99 6 CLASSIFICATION MARKING OF APPLICABLE P.C.B THICKNESS M3 × 0.5 thread A A E 4.5 10.5 Ｌ 17HE 4.5 (P.C.B mounting) 1 φ1.5 0.3 15.98 (P.C.B mounting) Through-hole Ground Tab Type 24.99 ± 0.1 2.54 ± 0.05 10.287 ± 0.05 4.51 ± 0.1 1.143 ± 0.05 2 Lock Pin Ground Tab Type 24.99 ± 0.1 2.54 ± 0.05 10.287 ± 0.05 4.548 ± 0.1 2 φ1.6 ± 0.05 Hole Land 3.024 ± 0.1 1.5 ± 0.1 3.495 ± 0.05 φ1.6 ± 0.05 Hole φ3.2 ± 0.05 Hole 3.024 ± 0.1 1.5 ± 0.1 4.548 ± 0.1 1.143 ± 0.05 3 3 ± 0.1 3 ± 0.1 4 6.5 15.98 ± 0.05 φ0.7 ± 0.05 Hole φ2.4 ± 0.1 Hole 15.98 ± 0.05 φ0.7 ± 0.05Hole φ5.5 Land (Installed on the back) 4 ●　 ● 11 以下 P.C.B thickness t＝1.6 t＝1.2 t＝1.0 17HE Series Unit : mm ■Space-Saving Right-Angle SMT Receptacle Connector Shell : φ3.1 Hole Ground tab : M3 × 0.5thread 2.5 0.5 4.2 7.8 16.3 24.99 30.8 12 0.3 * With single lock-pin ground-tab type, attach single lock-pin to PCB first, then double lock-pin to complete mounting. (Mounting is easier, requiring only about a half of force for insertion.) P.C.B 6.17 6 8.5± 0.5 7.6 4 0.3 φ2.4Hole 24.99 5.6 M3 × 0.5 thread 10.5 Single Lock Pin 4.5 (P.C.B mounting) CLASSIFICATION MARKING OF APPLICABLE P.C.B THICKNESS Double Lock Pin A A E 4.5 1 φ1.5 15.98 6± 0.5 (P.C.B mounting) Through-hole Ground Tab Type Single Lock Pin Ground Tab Type P/N 17HE-C13150-□1-FA 17HE-C13150-□2-FA 17HE-C13150-□3-FA E 4.0 3.6 3.4 Mark A B C P.C.B thickness t＝1.6 t＝1.2 t＝1.0 Lock Pin Ground Tab (Back Face) (5) Ｌ 17HE Terminal No. 1 2 34 5 6 7 8 9 10 11 12 13 14 15 (24.99) φ5.5 Land Arrangement of terminal Nos. (Front Face) Through-hole ground tab type 24.99 ± 0.1 2.54 ± 0.05 10.668 ± 0.05 4.5 ± 0.1 0.762 ± 0.05 1.5 2 φ1.6 ± 0.05 Hole 4 2 24.99 ± 0.1 2.54 ± 0.05 10.668 ± 0.05 φ1.6 ± 0.05 Hole 4 1.5 4.5 ± 0.1 0.762 ± 0.05 Land 3 ± 0.1 0.5 ± 0.03 15.98 ± 0.1 R2.8 Land φ3.2 ± 0.05 Hole 4 locator hole 3 3 ± 0.1 0.5 ± 0.03 6.5 15.98 ± 0.1 φ2.4 ± 0.1Hole 3.7 5 ●　 ● 3.7 17HE Series Unit : mm PCB Mounting Dimensions (mounted on the back) Type1 Connector cannot be fixed on panel. 34.09 R 13 min. Type2 Connector cannot be fixed on panel. 24.99 18.5 ± 0.3 6.5 ± 0.2 Type3 Connector cannot be fixed on panel. 24.99 ± 0.1 20.5 min. 4-R3.4 2-φ3.2 ± 0.1 4-R1 4-R2.5 +0.3 31.0 -0 10° Shape of Ground Tab 11.43 11.43 11.83 11.73 11.83 6.25 φ3.2 Hole ♯ 4-40UNC M3 × 0.5 M3 × 0.5 φ3.4 Hole 6.25 6.25 M3 × 0.5 M3 × 0.5 3 3 Type1 Tapping-hole ground tab (press-fit) Designation : 17L-004K Material/finish : Cu/Ni-plating Note) Cannot be used in combination with stud 17L-002□ Type2 Through-hole ground tab (press-fit) Designation : 17L-004H Material/finish : Cu/Ni-plating Note) Cannot be used in combination with stud 17L-002□ Type3 Type5 Type6 Lock pin ground tab with tapping hole (press-fit) Designation : 17L-004E-FA Material/finish : Cu alloy/solder-plating Note) Cannot be used in combination with stud 17L-002□ Lock pin ground tab with through-hole (press-fit) Designation : 17L-004C-FA Material/finish : Cu alloy/solder-plating Note) Cannot be used in combination with jack socket 17H-003A-□□. #4-4OUNC thread Designation : 17L-004V-FA Material/finish : Cu alloy/Sn-Ag plating Note) Cannot be used in combination with stud 17L-002□. Engaging Block ●Jack Socket (material/finish : brass/Ni-plating) (Type fastened to panel from both sides) P/N 17L-003□26-CF G 4.8 5.3 H :Panel thickness 0.9～1.3 0.5～0.8 5 G G 5.8 M3 × 0.5 thread 10.3 3 Ｌ 17HE 17L-003□32-CF Panel □ : Thread size 　 A : M2.6×0.45(Standard) 　 B : M3×0.5 　 C : ＃4-40UNC thread ●Stud (Material/Finish ・ ・ ・ ・ Zn die-cast/Ni plating ・ Jack Socket(Material/Finish ・ ・ Brass/Ni Plate) 5 B 8 □ in the designation above stands for type of engaging screw. 5.8 P/N : 17L-002□ Mounting hole : type 1 thread M3 × 0.5 thread P/N 17H-003A-CF 17H-003A-CF 17H-003A-CF G 4.8 5.3 6.1 H :Panel Panel thickness : 0.9～1.3 Panel thickness : 0.8max. Hole Type3 Type3 Type2 Not fastened to panel from both sides. 6 ●　 ● H 11.4 min. +0.3 10 -0 17HE Series Unit : mm ■Plug Connector (Crimp Type) 17HE-23150-C NO. OF CONTACTS 15 SHAPE OF BLOCK C : Crimp type 4.83 3.68 2.54 1.4 0.25 1.98 5.46 4.32 3.18 2.03 0.89 φ3.1 8.1 12.4 3 1 5.9 Contact 1.98 4.4 10.2 1.0 24.99 30.7 16 27.8 7 11 ■Crimp Pin Contact 17H-2PCR-102(P500) CONTACT PLATENG 2 : Mating area : 0.4μm Gold over Nickel plating 　 Tail area : Golde flash over Nickel plating 3 : Mating area : Gold flash over Nickel plating 　 Tail area : Gold flash over Nickel plating NO. OF CONTACTS P500 : 500 Contacts/Pack R10000 : 10000 Contacts/Reel R : Rear release type C : Crimp type P : Pin type Ｌ 1.39 17HE φ1.5 6.7 φ0.76 1.39 0.6 3.35 8.5 1.4 3 0.8 7 ●　 ● 5 17HE Series Tools ●Manual wiring tool 　 Designation- 357J-14443 (compatible wires : AWG #26 to 30) ●Tool for inserting/removing contact 　 Designation : 357J-10629 Contact-Removing side Contact-Inserting side ●Tool for erecting contact ratch 　 Designation : 357J-10628 ●Semi-automatic crimping machine 　 Stripper crimper Designation : AP-A13980 (including press unit) Power supply : AC100V (0.2kW) Weight : 88kg Crimper Designation : AP-A13981 (including press unit) Power supply : AC100V Weight : 45kg Ｌ 17HE 8 ●　 ●