17JE-13090-37D2A-FA

17JE Series Straight DIP Type FEATURE RoHS Compliant ●DIP-type connector mounted directly on PCB. Con - tact tail is straight, allowing vertical mounting of connector on PCB. ●Number of contacts : 9, 15, 25 and 37 ●Press-fabricated contacts. Standard surface finish ing of contacts : Connections Au-plated (0.4 μ) on Ni-substrata, tails Sn-Ag plated. ●To fasten engagement with counterpart, an engaging block and a hexagon-head nut can be attached, allowing connection of PCB's and metal shell's grounding and improving resistance against EMI. Ｇ SPECIFICATION Voltage Rating Current Rating Dielectric Withstanding Voltage Insulation Resistance Contact Resistance Temperature 300V AC (r.m.s.) 5A/Contact 1,000V AC (r.m.s.) for 1 minute 1,000MΩ min. at 500V DC 15mΩmax. －25℃ to ＋85℃ 17JE MATERIAL/FINISH P/N Block Shell Contact Eyelet Steel/Nickel Plating Copper alloy/Mating area : 0.4μm, Gold over Nickel Plating Tail area : Sn-Ag over Nickel Plating Brass/Nickel Plating MATERIAL/FINISH Polyamide resin (UL94V-0)/Black 5 ●　 ● 17JE Series Unit : mm 17JE-13250-37-FA NO.OF.CONTACTS 09, 15, 25, 37 Type ３ A B 2-φ3.1 ± 0.1 (REAR MOUNTING) B H min. 2-φ3.2 ± 0.1 12.5 U I 4-R3.2 11.4 min. n-φ1 ± 0.1 2-φ3.2 ± 0.1 10° Panel cut-out dimensions Panel Thickness : 0.8 to 1.3 Ｇ 17JE 0.3 6.1 2.9 6.9 7.8 3.2 0.7 1.0 C 0.5 2.84 D E G F ± 0.1 E ± 0.1 Dia. Hole 2.84 ± 0.1 9 E ± 0.1 D ± 0.1 B ± 0.1 G F P.C.B. Mounting Dimensions (REFERENCE) P/N 17JE-13090-37-FA 17JE-13150-37-FA 17JE-13250-37-FA 17JE-13370-37-FA A 30.8 39.1 53.0 69.3 B 24.99 33.32 47.04 63.50 C 18.99 27.32 41.04 57.50 D 10.98 19.20 33.12 49.68 E 2.74 2.74 2.76 2.76 F 8.22 16.44 30.36 46.92 G 1.37 1.37 1.38 1.38 H 20.5 28.8 42.5 59.1 6 ●　 ● 17JE Series Unit : mm 17JE-13250-37(D2A)-FA NO.OF.CONTACTS 09, 15, 25, 37 DEVIATION With Locking Device and Pan head Screw J B Thread Size A :M2.6×0.45 B :M3×0.5 C :＃4-40UNC 12.5 7.8 0.3 6.1 6.3 Ｇ 17JE 0.7 C A D E 1.0 3.2 0.5 2.84 Type １ K min. 9 13 min. 4-R1 * Connector cannot be fixed on panel. G F No.of Contacts 09 15 25 37 A 30.8 39.1 53.0 69.3 B 24.99 33.32 47.04 63.50 C 18.99 27.32 41.04 57.50 D 10.98 19.20 33.12 49.68 E 2.74 2.74 2.76 2.76 F 8.22 16.44 30.36 46.92 G 1.37 1.37 1.38 1.38 J 33.09 41.42 55.42 71.60 K 34.09 42.42 56.14 72.60 7 ●　 ● 17JE Series Unit : mm Mounting Straight DIP Type (□ stands for type of engaging screw.) Reference drawing of panel mounting hole Screw PCB Screw Panel Stud Connector Stud Connector 4-R1 K min. * Connector cannot be fixed on panel. Stud (17L-002□) PCB Nut 6.1 Connector Jack ・ socket Nut Spacer Earth plate (Board Lock) Type ２ 10 +0.3 -0 2-φ3.2 ± 0.1 B ± 0.1 H min. 4-R3.2 11.4 min. 10° 6.5± 0.2 L min. M± 0.3 R 4-R2.5 B ± 0.1 Ｇ 17JE Jack Socket (17L-003□1) Square-head nut PCB thickness : t=1.6 * Connector cannot be fixed on panel. Earth plate (Board Lock) Nut 4.8 Connector Jack ・ socket Nut Spacer Type ３ (REAR MOUNTING) Jack Socket (17L-003□3) □ : Jack socket thread size Ａ :M2.6×0.45(Standard) Ｂ :M3×0.5 Ｃ :#4-40UNC Square-head nut ※ Connector Cambetixed an Panel (Panel thicknees :0.8 to 1.3) No.of Contacts 9 15 25 37 B 24.99 33.32 47.04 63.50 H 20.5 28.8 42.5 59.1 K 34.09 42.42 56.14 72.60 L 31.0 39.3 53.2 69.5 M 18.5 26.8 40.5 57.0 8 ●　 ● 13 min. Spacer Panel Type １ 17JE Series Unit : mm List of Straight Type Deviations (Shows combinations of ground tab/spacers and stud/jack sockets). * “Equipped with” as used here means that connector has an accessory built in. “Bundled (not built in)” as used here means that connector is supplied with an accessory not built in but bundled with it 17JE-13□□0-37-FA 17JE-23□□0-37-FA Designations of Ground Tab and Spacer Stud Jack Socket Designation 17L-002□ With locking device and pan head screw and 17L-002□ 17JE-13□□0-37(D2□)-FA 17J-011-FA Board Lock 57D-149-6A Spacer φ3.3 　　 　 Type1 Type not fastened to panel from both sides 3.6 Ｇ 6.5 Type not fastened to panel from both sides 6.1 Type2 17L-003□1 Equipped With M3 hexagon With M3 hexagon nut and 17L-003□1 nut and 17L-003□1 17JE-13□□0-37(D3□)-FA 17JE-13□□0-37(D23□)-FA 17JE M3 17L-003□2-CF 6.1 Equipped With M3 hexagon nut and 17L-003□2-CF 17JE-13□□0-37(D28□)-CA 17L-003□4-CF 12 6.1 13 M3 Equipped With M3 hexagon nut and 17L-003□4-CF 17JE-13□□0-37(D16□)-CA M3 Type3 Type fastened to panel from both sides (panel thickness : 1.3 max.) 17L-003□3 With Jack Sockets and hexagon nut 17L-003□3 17JE-13□□0-37(D4□)-FA Equipped With M3 hexagon nut and 17L-003□3 17JE-13□□0-37(D31□)-FA 4.8 7.8 M3 With Jack Sockets and 17L-003□3 17JE-13□□0-37(D36□)-FA Equipped With M3 hexagon nut and 17L-003□6-CF 17JE-13□□0-37(D71□)-CA With Jack Sockets and 17L-003□6-CF 17JE-13□□0-37(D30□)-CA □stands for type of engaging screw. Ａ :M2.6×0.45(Standard) Ｂ :M3×0.5 Ｃ :#4-40UNC 17L-003□6-CF 4.8 13 M3 Stands for on combination. is recommended. 9 ●　 ●