17JE-13370-07PD1

D-Sub Solder Termination(Press Contact) 17JE Series (P) Type FEATURES ・Solder-cup termination contact for manual soldering. ・ Contact is press-fabricated to meet stable quality and low cost requirement. ・Number of contact is 9, 15, 25 and 37. ・The metal shell is in Nickel plating. ・Connection of cable and plug can be shielded by the metalize-finished hood, improving resistance against EMI shield. SPECIFICATIONS Rated Voltage Rated Current Dielectric Withstanding Voltage Insulation Resistance Contact Resistance Applicable Cable Operating Temperature 300V AC (r.m.s.) 2A / Contact 1000V AC (r.m.s.) / 1 minute 1000M Ω min. at 500V DC 10m Ω max. Solid Cable AWG22 max. Stranded Cable AWG24 max. -25℃∼ 85℃ RoHS MATERIAL / FINISH Item Insulator Shell Contact Steel / Ni Plating Copper Alloy / Au over Ni Plating (Contact Area) Compliant Compliant Material / Finish PBT Resin (UL94V-0）/ White ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. 090703 http://www.ddknet.co.jp 17JE Series (P) Type Unit：mm ○ Solder Termination Type 17JE-13250-07P(D1)A Connector Style １: Socket Connector Plating on Shell ３: Ni Plating Number of Contact 09 15 25 37 Contact Material A: Phosphor Bronze(Socket Connector) Deviation D1: Standard Type P：Press-fabricated Contact Contact Plating 7: Contact Area: Au(Flash) over Ni Plating   Tail Area: Sn-Ag over Ni Plating Termination Style 0: Solder Cup Style 17JE-13 □□ 0-07P(D1)A Socket Connector A B Contact No. 2-φ3.1 Hole n D C φ0.9 (Solder Cup Bore) E 11.0 Number of Contact 9 15 25 37 Part Number 17JE-13090-07P(D1)A 17JE-13150-07P(D1)A 17JE-13250-07P(D1)A 17JE-13370-07P(D1)A A 30.70 39.00 52.90 69.20 B 24.99 33.32 47.04 63.50 1.0 6.1 12.4 7.8 1 C 10.98 19.20 33.12 49.66 D 1.37 1.37 1.38 1.38 E 19.50 27.75 41.50 57.95 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2