17LE-13250-26D2BB-FA

D-Sub Right Angle DIP Termination 17LE Series 17LE-13150-2 □ -FA 17LE-23250-2 □ -FA 17LE-13370-2 □ -FA FEATURES ・17LE series are connected to a circuit by through hole DIP solder termination style mounting on PCB and fastened on the bracket by stud or jack socket. ・Number of contact : 9, 15, 25 and 37 ・Studs and hex nuts are available to fasten with mating half. This connection with PCB and metal shell is grounding and improving the resistance against EMI. ・The metal shell is in Nickel plating. The pin connectors of metal shell are beat-finished. ・4 types of ground tabs are mountable on the bracket for protection against EMI. SPECIFICATIONS Rated Voltage Rated Current Dielectric Withstanding Voltage Insulation Resistance Contact Resistance Operating Temperature 300V AC (r.m.s.) 5A / Contact 1000V AC (r.m.s.) / 1 minute 1000M Ω (min.) at 500V DC 15m Ω (max.) -25℃∼ 85℃ MATERIAL / FINISH Item Insulator Shell Contact Eyelet RoHS Compliant Compliant Material / Finish Polyamide Resin (UL94V-0）/ Black Steel / Ni Plating Copper Alloy / Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag Plating over Ni Plating Brass / Ni Plating ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. 090703 http://www.ddknet.co.jp 17LE Series Unit：mm ○ Right Angle Socket Connectors 17LE-13250-27(D3AB)-FA FA: Lead Free Mating Style １: Socket Connector Shell Plating ３: Ni Plating Number of Contact 9, 15, 25, 37 Key Position 0: No Key Contact Tail Style 2: Right Angle DIP Termination Contact Plating 6: Contact Area: Au(0.8 μ m) over Ni Plating  Tail Area: Sn-Ag over Ni Plating 7: Contact Area: Au(0.4 μ m) over Ni Plating  Tail Area: Sn-Ag over Ni Plating 8: Contact Area: Au(Flash) over Ni Plating  Tail Area: Sn-Ag over Ni Plating  Deviation No Digit: Connector Only （D3AB)  Grounding Tab (Please refer to page 4.)  No Digit: Less Grounding Tab  B：with Ground Tab 17L-004B  C：with Board Lock 17L-004C-FA  D：with Ground Tab 17L-004D ※ Ground tab B and D can not be combined with stud.  Thread Size  A：M2.6 0.45  B：M3 0.5  C：＃ 4-40UNC  2: with Stud Type1 (17L-002 □ )  3: with Jack Socket Type 2 (17L-003 □ 1)  4: with Jack Socket Type 3 (17L-003 □ 3) ・□ : Thread Type A, B, C ・Regarding the combinations of grounding tab, stud and jack socket, please refer to the list on page 6. 17LE-13xx0-27(D3xx)-FA Socket Connector A B C D (n+3)/2 Contact 2.84 (E) 0.7 No.n Contact Thread Size （Refer to part number code） (6.25) H Ｊ +0.3 0 0.3 (6.25) 6.5 0.2 X X No.1 Contact (n+1)/2 Contact Y 0.3 6.4 6.1  R 4-R2.5 B 0.1 Panel Mounting Dimensions(Rear Mounting) 2.28 (9.6) 0.5 9.6 12.6 G 2.84 0.5 0.8 2.84 E F 0.1 0.1 n-φ1.0 0.1 Through Hole 0.1 (Ｂ) Y 2-φ3.2 M3 0.5 Thread Fixed with adhesive part DDK 1 n+3 2 n n+1 2 M3 0.5 Thread F 0.1 D B 6.25 0.1 0.1 Section Y−Y   Number of Contact 9 15 25 37 A 30.80 39.10 53.04 69.32 B 24.99 33.32 47.04 63.50 3.2 Contact No. PCB Mounting Dimensions  （Applicable PCB Thickness:ｔ＝１． ６ （View from mounting pattern side) C 16.80 25.12 38.84 55.30 D 10.98 19.20 33.12 49.68 E 1.37 1.37 1.38 1.38 F 2.74 2.74 2.76 2.76 G 8.22 16.44 30.36 46.92 H 18.50 26.80 40.70 57.00 J 31.00 39.30 53.20 69.50 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 2.84 0.1 0.19） 10.0 0 Through Hole 12.5 7.8 +0.3 n 1 17LE Series Unit：mm ○ Right Angle Plug Connectors 17LE-23250-27(D3AB)-FA FA: Lead Free Connector Type 2: Plug Connector Shell Plating ３: Ni Plating Number of Contact 9, 15, 25, 37 Key Position 0: No Key Contact Tail Style 2: Right Angle DIP Termination Contact Plating 6: Contact Area: Au(0.8 μ m) over Ni Plating  Tail Area: Sn-Ag over Ni Plating 7: Contact Area: Au(0.4 μ m) over Ni Plating  Tail Area: Sn-Ag over Ni Plating 8: Contact Area: Au(Flash) over Ni Plating  Tail Area: Sn-Ag over Ni Plating  Deviation No Digit: Connector Only （D3AB)  Grounding Tab (Please refer to page 4.)  No Digit: Less Grounding Tab  B：with Ground Tab 17L-004B  C：with Board Lock 17L-004C-FA  D：with Ground Tab 17L-004D ※ Ground tab B and D can not be combined with stud.  Thread Size  A：M2.6 0.45  B：M3 0.5  C：＃ 4-40UNC  2: with Stud Type1 (17L-002 □ )  3: with Jack Socket Type 2 (17L-003 □ 1)  4: with Jack Socket Type 3 (17L-003 □ 3) ・□ : Thread Type A, B, C ・Regarding the combinations of grounding tab, stud and jack socket, please refer to the list on page 6. 17LE-23xx0-27(D3xx)-FA Plug Connector A B C No.n Contact (E) 2.84 D 0.7  Thread Size   （Refer to part number code.） (n+3)/2 Contact 8.25 12.5 n +0.3 0 0.3 Ｊ (6.25) H 6.5 4-R2.5  R B 0.1 0.2 (6.25) X X No.1 Contact Y (n+1)/2 Contact 6.4 0.3 5.9 Panel Mounting Dimensions(Rrear Mounting) 2.28 12.6 0.5 (9.6) 9.6 2.84 0.5 (B) Y Ｍ３ 0.5 Thread 0.8 2.84 G E F 0.1 0.1 n-φ1.0 0.1 Through Hole 0.1 2-φ3.2 n+1 2 ｎ １ n+3 2 6.25 DDK D B 0.1 0.1   SectionY−Y  Number of Contact 9 15 25 37 A 30.80 39.10 53.00 69.30 B 24.99 33.32 47.04 63.50 3.2 PCB Mounting Dimensions  （Applicable PCB Thickness ｔ＝１． ： ６ （View from mounting pattern side） C 16.80 25.12 38.84 55.30 D 10.98 19.20 33.12 49.68 E 1.37 1.37 1.38 1.38 F 2.74 2.74 2.76 2.76 G 8.22 16.44 30.36 46.92 H 18.50 26.80 40.70 57.00 J 31.00 39.30 53.20 69.50 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 2.84 0.19） Contact No. Fixed with adhesive part Ｍ３ 0.5 Thread F 0.1 0.1 10.0 0 Through Hole +0.3 1 17LE Series Unit：mm ○ Ground Tab Ground Tab for 17LE Ground tab enables 17LE series to ground to PCB easily. Ground Tab with Tapping Hole Part Number : 17L-004B Material / Finish: Steel / Ni Plating ※ Combination of stud 17L-002 □ is not available. Thread M3 0.5 Ground Tab with Board Lock Part Number : 17L-004C-FA Material / Finish: Copper Alloy / Sn-Ag Plating Thread M3 0.5 Ground Tab with Thrugh Hole Part Number : 17L-004D Material / Finish: Steel / Ni Plating ※ Combination of stud 17L-002 □ is not available. φ 3.2 Hole ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 17LE Series Unit：mm ○ Mounting on Panel and PCB （□ : Thread Size) Type 1 Panel Stud Pan-head Screw 4-R1.0 Connector K min. 13.0 min. 0.2 Panel MountingDimensions Stud (17L-002 □ ) ※ Connector can not be fastened Type 2 6.1 on the panel. 6.5 2-φ3.2 0.1 H M3 0.5 Thread Hex Nut Connector Jack Socket 4-R2.5 0.3 6.5 R B 0.1 ※ Connector can not be fastened Jack Socket (17L-003 □ 1) on the panel. Type 3 Connector Jack Socket 11.4 min. 4-R3.4 4.8 Hex Nut M3 0.5 Thread 7.8 10 C min. B 0.1 ※ Connector can be fastened on the panel.   （Panel Thickness：0.8 ∼ 1.3） Jack Socket (17L-003 □ 3) □: Ａ: Ｂ: Ｃ: Thread SIze M2.6 0.45 M3 0.5 #4-40UNC Number of Contact 9 15 25 37 B 24.99 33.32 47.04 63.50 C 16.30 24.64 38.35 54.80 H 18.50 26.80 40.70 57.00 J 31.0 39.3 53.2 69.5 K 34.09 42.42 56.14 72.60 Applicable PCB Thickness 1.6 0.19 Ground Tab (Board Lock) Ground Tab Ground Tab Screw (not attached) G E F 0.1 0.1 n-φ1.0 0.1 Through Hole 0.1 2-φ3.2 Through Hole Number of Contact B 24.99 33.32 47.04 63.50 D 10.98 19.20 33.12 49.68 E 1.37 1.37 1.38 1.38 F 2.74 2.74 2.76 2.76 G 8.22 16.44 30.36 46.92 0.1 9 15 25 37 F 0.1 D B 0.1 0.1 PCB Mounting Dimensions  （Applicable PCB Thickness:ｔ＝１． ６ （View from mounting pattern side) ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2.84 0.19） 5 10.0 +0.3 0 J +0.3 0 17LE Series Unit：mm ○ 17LE Series Mounting Accessories Deviation ※ ASSEMBLED: The mounting accessories are assembled with connector.  ATTACHED: The mounting accessories are attached separately.   17LE-13 □□ 0-27-FA   17LE-23 □□ 0-27-FA 17L-004B Ground Tab Part Number None Panel Mounting Operation 17L-004D 17L-004C-FA 17L-004E-FA t=1.6 t=1.6 M3 0.5 M3 0.5 t=1.6 t=0.8 M3 0.5 φ3.2 Hole φ3.2 Hole Stud   Jack Socket Part Number Press in ground tab 17L-004E-FA None 17LE- □ 3 □□ 0-27(D41)-FA Type 1 Connector can not be fastened on the panel. 17L-002 □ Stud 17L-002 □ and panhead screw(L=6) are ASSEMBLED. Ground tab 17L-004C-FA is fastened by stud 17L-002 □ and panhead screw (L=7). 17LE- □ 3 □□ 0-27(D2 □ )-FA 17LE-□3□□0-27(D2□C)-FA Type 2 Connector can not be fastened on the panel. To prevent loosening, screws are locked by adhesive. Jack socket 17L-003 □ 1 17L-003 □ 1 and hex nut(M3) are ASSEMBLED. 6.1 Press in ground tab Press in ground tab Ground tab 17L-004B and jack is ASSEMBLED. 17L-004D and jack is ASSEMBLED. 17L-004C-FA is socket 17L-003 □ 1 and hex nut(M3). socket 17L-003 □ 1 socket 17L-003 □ 1 fastened by jack Press in ground tab 17L-004E-FA and jack socket 17L-003 □ 1 is ASSEMBLED. 17LE- □ 3 □□ 0-27(D3 □ )-FA 17LE-□3□□0-27(D3□B)-FA 17LE-□3□□0-27(D3□D)-FA M3 17LE-□3□□0-27(D3□H)-FA Press in ground 17LE-□3□□0-27(D3□C)-FA tab 17L-004E-FA 6.5 and 17L-003 □ 1 is ATTCHED. 17LE-□3□□0-27(D3□K)-FA Type 3 Connector can be fastened on the panel. Panel thickness: 1.3 max. Jack socket 17L-003 □ 3 17L-003 □ 3 and hex nut(M3) are ASSEMBLED. Press in ground tab Press in ground tab Ground tab 17L-004B and jack 17L-004D and jack 17L-004C-FA is socket 17L-003 □ 3 socket 17L-003 □ 3 fastened by jack socket 17L-003 □ 3 is ASSEMBLED. is ASSEMBLED. and hex nut(M3). Press in ground tab 17L-004E-FA and jack socket 17L-003 □ 3 is ASSEMBLED. 4.8 17LE- □ 3 □□ 0-27(D4 □ )-FA 17LE-□3□□0-27(D4□B)-FA 17LE- □ 3 □□ 0-27(D4 □□ )-FA M3 17LE-□3□□0-27(D4□H)-FA Press in ground tab17L-004E-FA and 17L-003 □ 3 is ATTACHED. 7.8 17LE-□3□□0-27(D4□C)-FA 17LE-□3□□0-27(D4□K)-FA Recommended □ : Thread Size (Stud)  A：M2.6 0.45 B：M3 0.5 C：＃ 4-40UNC Not available ※ Above list shows combinations of ground tab, stud and jack socket. The deviation is given in parentesis in each sections. Regarding the detail, please contact our sales. ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 6