27DP-LP-1.5DW-CR1

27DP Series SMB Type Connectors ●27DP series are connectors produced based on SMB type (Sub-Miniature type B) specified in MIL-C-39012. ●27DP is super small size coaxial cable connectors for 50 Ω group corresponding to minimization of communication equipment. ●Connection method is push-on type, and fixing method cable is by crimping or soldering. CONFORMING STANDARD JIS-C-5415、 MIL-C-39012、 DSP-C-6205 SPECIFICATION Characteristic Impedance Dielectric withstanding voltage Insulation resistance Contact resistance VSWR 50Ω 1000V AC (rms) for 1 minute 1000MΩmin. at 500V DC 6mΩ max. 1.2max. at DC～2GHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Shell (Body) Contact (male) Contact (female) Insulators Copper alloy/Gold or Nickel plating Copper alloy/Gold plating Copper alloy/Gold plating PTFE Please ask us for the cable assemblies to assure its performance. ●　 ● 1 27DP Series Unit : mm ■ Plug Crimp Type φA φ6 P/N 27DP-P-1.5QEV-AA Applicable Cable 1.5DS-QEHV 1.5D-QEV 1.5D-2W 1.5D-QEW 1.5D-2W 1.5D-QEW 1.5D-HQ ･ SUPER 2.5D-HQ ･ SUPER 2.5D-2VS φA 4.8 4.8 4.8 4.8 5.9 5.9 L 17.5 17.5 17.5 18.1 18.2 18.3 Finish Shell Ni Ni Au Ni Ni Ni Contact Au Au Au Au Au Au Hand Crimp Tool P/N CR-H-1160 CR-H-1160 CR-H-1160 CR-H-1156 CR-H-1163 CR-H-1163 L 27DP-P-1.5QEW-AA 27DP-P-1.5QEW-AA-D1 27DP-SP-1.5DHQS-CR1 27DP-SP-2.5DHQS-CR1 27DP-SP-2.5DVS-CR1 Semi-Flexible Cable Type φ4 φ6 P/N 27DP-SP-FCCAV1-SO Applicable Cable FCCAVG1 Finish Shell Ni Contact Au 12.1 ■ Right Angle Plug Crimp Type P/N L2 Applicable Cable 0.8D-QEW 1.5DS-QEHV 1.5D-QEV 1.5D-QEW 1.5D-QEW φA 3.4 4.8 4.8 4.8 L1 13.2 L2 14.4 Finish Shell Ni Ni Ni Au Contact Au Au Au Au Hand Crimp Tool P/N CR-H-K0012-04 CR-H-1160 CR-H-1160 CR-H-1160 27DP-LP-0.8DW-CR1 27DP-LP-1.5QEV-AA 13.2 14.0 13.2 14.0 13.2 14.0 φA L1 27DP-LP-1.5QEW-AA 27DP-LP-1.5QEW-AA-D1 □6 P/N 27DP-LP-1.5DW-CR1 L2 Applicable Cable 1.5D-QEW 1.5D-HQ ･ SUPER 1.5D-QEV 2.5D-HQ ･ SUPER 2.6D-XFV-A φA L1 L2 Finish Shell Ni Ni Ni Contact Au Au Au Hand Crimp Tool P/N CR-H-1156 CR-H-1156 CR-H-1163 4.8 10.0 14.0 4.8 10.0 14.0 5.9 11.0 14.0 27DP-LP-1.5DHQS-CR1 27DP-LP-2.5DHQS-CR1 φA L1 ● 　● 2 27DP Series Unit : mm ■ Right Angle Plug Semi-Flexible Cable Type P/N 9.3 Applicable Cable FCCAVG1 Finish Shell Ni Contact Au 27DP-LP-FCCAV1-SO-1 9.7 ●　 ● 3 27DP Series Unit : mm ■ Jack Semi-Flexible Cable Type Finish Shell Ni Contact Au P/N φ6.0 Applicable Cable FCCAVG1 27DP-SJ-FCCAV1-SO 11.8 P/N φ6.0 Applicable Cable FCCAVG2 Finish Shell Ni Contact Au 27DP-SJ-FCCAV2-SO 12.5 ● 　● 4 27DP Series Unit : mm ■ Bulkhead Jack Crimp Type Applicable Cable 1.5D-QEW Finish Shell Ni Contact Au Hand Crimp Tool P/N CR-H-1156 φ7.9 φ6 P/N 27DP-BJ-1.5DW-CR1 2.5MAX 19.4 8 Mounting Hole 1.2 -0 +01 φ5.2 +01 -0 Semi-Flexible Cable Type Finish Shell Ni Contact Au 3.2 -0 +0.1 φ6.0 φ7.9 P/N 27DP-BJ-FCCAV1-SO Applicable Cable FCCAVG1 2.5MAX 14.3 3.43 Mounting Hole 1.2 -0 +01 φ5.2 +01 -0 3.2 -0 +0.1 ●　 ● 5 27DP Series Unit : mm ■ Receptacle Finish Shell Ni Contact Au P/N 27DP-SR-PC-1 4- □ 0.7 □ 5.7 9.8 7.3 PCB Mounting Dimensions 5-φ1.2 +0.1 -0 2.54 ± 0.05 2.54 ± 0.05 5.08 ± 0.1 5.08 ± 0.1 P/N 27DP-SR-PC-5 4- □ 0.7 □ 5.7 9.85 12.3 Finish Shell Ni Contact Au PCB Mounting Dimensions 5-φ1.2 +0.1 -0 2.54 ± 0.05 2.54 ± 0.05 5.08 ± 0.1 5.08 ± 0.1 5.9 P/N φ3.06 φ1 1.7 9.5 16.5 4 3 Finish Shell Ni Contact Au 5.9 □ 9.5 4-φ2.4 27DP-SR-1 ● 　● 6 27DP Series Unit : mm ■ Receptacle φ3.08 φ1 5.9 P/N 1.7 9.5 1. 7 12.7 Finish Shell Ni Contact Au 5.9 □ 9.5 4-φ2.4 27DP-SR-2 1.5 2-φ2.75 12.2 φ16.8 P/N φ3.08 φ1 Finish Shell Ni Contact Au 27DP-SR2-3 24 1.65 9.8 15.5 5.8 2-φ2.2 4.5 0.3 φ13 φ3.1 P/N 27DP-SR2-14 Finish Shell Ni Contact Au 9 5.8 1.2 2 4.5 9.1 13.6 2-φ2.2 0.3 9 4.5 φ13 φ3.1 P/N 1.2 Finish Shell Ni Contact Au 27DP-SR2-16 5.8 10 12.5 23.6 11.1 2-φ2.75 P/N φ16.8 φ3.08 12.2 Finish Shell Ni Contact Au 27DP-SR2-17 1.65 5 1 9.5 15.5 5.8 ●　 ● 7 27DP Series Unit : mm ■ Right Angle Receptacle Finish Shell Ni Au Contact Au Au P/N 4.55 9.9 27DP-LR-PC-1 27DP-LR-PC-1-D1 12 2.5 P/N 4.55 8.9 Finish Shell Ni Contact Au 27DP-LR-PC-5 12 1.5 4.55 9.9 P/N 27DP-LR-PC-10 Finish Shell Ni Contact Au 7.5 14.2 2.5 5.05 10.4 P/N 27DP-LR-PC-11 Finish Shell Ni Contact Au 7.5 14.2 PCB Mounting Dimensions 5-φ1.2 +0.1 -0 2.54 ± 0.05 2.54 ± 0.05 5.08 ± 0.1 5.08 ± 0.1 2.5 ● 　● 8 27DP Series Unit : mm ■ Bulkhead Receptacle Finish Shell Ni Ni Contact Au Au φB φA P/N 27DP-BR-9 27DP-BR-11 D φA 7.0 6.2 φB 0.5 0.8 C 2.2 3.0 D 6.0 5.4 L 12.9 13.7 1 2.3 L C ■ Plug Receptacle 4-φ2.4 φ3.08 φ1 P/N 8.64 Finish Shell Ni Contact Au 27DP-PR-1 1.65 3 4 9.7 16.7 8.64 □ 12.7 2-φ2.7 φ3.08 φ1 P/N φ6 φ17 φ12.2 Finish Shell Ni Contact Au 27DP-PR2-2 2 4 1.65 9.7 15.7 5.8 ■ Right Angle Plug Receptacle Finish Shell Ni Contact Au P/N 10.1 9.9 27DP-LPR-PC 12.2 PCB Mounting Dimensions 5-φ1.2 +0.1 -0 2.54 ± 0.05 2.54 ± 0.05 5.08 ± 0.1 5.08 ± 0.1 ●　 ● 9