57GE-20140-661-FA

Straight Solder DIP Termination Connectors 57GE Series FEAURES ・ 57GE series is straight DIP termination connectors which shielded the interface for ESD protection. ・ Mounting height is 6.9mm from PCB surface. It is same mounting height as our D-sub straight DIP termination connectors(17JE series). ・ Cantilever contact design ・ Intermatable with each 57, 57F, 57FE, 57JE series connectors. ・10 Type (Rack and Panel Mounting Plug) ・40 Type (Interface Receptacle) ・20 Type (Rack and Panel Mounting Receptacle) SPECIFICATIONS Rated Voltage Rated Current Dielectric Withstanding Voltage Insulation Resistance Contact Resistance Operating Temperature 500V AC（r.m.s.） 3A / Contact 1200V AC（r.m.s.）at 1 minute 1000M Ω (min.) at 500V DC 35m Ω (max.) -55℃∼ 105℃ RoHS MATERIAL/FINISH ITEM Insulator Shell Contact Bail Lock Compliant Compliant MATERIAL/FINISH PBT Resin(UL94V-0) / Blue or Black Steel or Brass / Ni Plating Copper Alloy / Au over Ni Plating Stainless Steel(40 Type) ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. 090702 http://www.ddknet.co.jp 57GE Series Unit：mm ○ 10 Type Rack and Panel Mounting Plug 5 7G E-10360- 752(D8)-FA FA: Lead Free Mating Style 10 Type: Plug Number of Contact 24, 36, 50 Daviation （D8）: with Clinch Nut (M3 0.5） Contact Plating 6: Contact Area: Au(0.76μm) over Ni Plating Tail Area: Sn-Ag over Ni Plating 7: Contact Area: Au(0.3 8μm) over Ni Plating   Tail Area: Sn-Ag over Ni Plating Contact Tail Spacing 2: 3.9mm Contact Tail Length 5: 3.2mm B 2-φ3.2 A Ｂ No.1 Contact (2.159) C C1 L 12.14 n/2 0.1 0.1 hole 0.1 +0.1 0 n-φ0.8 No.n/2 Contact (2.1) 2.159 0.08 0.1 C2 L n 15.1 (11.52) C Ｎｏ． n/2+1 Contact No.n Contact PCB Mounting Dimensions   PCB Thickness=1.6 0.19 mm D (0.3) X 8.67 B E 0.1 +0.2 0 5.0 3.9 0.1 0.3 2-φ3.2 3.2 +0.2 0 hole 2.159 Ｍ３ 0.5 Thread C 0.5 X (0.3) 3.9 Se c tio n X - X 15 1 15.5 4R5 ※１：When the mating connector is 57F or 57FE series, the size ※1 is 16.20 +0.2 0 Panel Mounting Dimensions(Rear Mounting) Applicable Panel Thickness=1.6mm(max.) Part Number 57GE-10240- □ 52（D8）-FA 57GE-10360- □ 52（D8）-FA 57GE-10500- □ 52（D8）-FA Number of Contact 24 36 50 A 54.78 67.74 82.85 B 46.78 59.74 74.85 C 23.749 36.703 51.816 D 17.0 17.0 17.0 E 40.10 53.00 68.20 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 ＊1 57GE Series Unit：mm ○ 20 Type Rack and Panel Mounting Receptacle 5 7 G E-20360-751( D 40) - FA FA: Lead Free Mating Style 20: Receptacle Number of Contact 14, 24, 36, 50 Deviation （D40): Pan-head Screw(M3 0.5)     Hex Nut Assembled and Hex Nut(M3 0.5) Attached Contact Tail Spacing  1：4.2mm Contact Tail Length(F)  5: 3.2mm  6: 4.0mm Contact Plating 6: Contact Area: Au(0.76μm) over Ni Plating Tail Area: Sn-Ag over Ni Plating 7: Contact Area: Au(0.3 8μm) over Ni Plating   Tail Area: Sn-Ag over Ni Plating B A B C 0.2 0.1 No.n/2 Contact No.1 Contact 2-φ3.2 0.1 +0.1 (2.1) n-φ0.8 0 Through Hole 15.1 12 2.159 No.n Contact 2.159 D No.n n/2+1 Contact 0.08 (11.52) D 0.1 X (0.3) Pan-head Screw M3 0.5 Thread 8.7 PCB Mounting Dimensions   Applicable PCB Thickness=1.6 0.19mm 13.5 B 0.1 +0.2 E0 4.2 0.1 2-φ3.2 F 2.159 D X Hex Nut Assembled 0.5 0.3 15.5 0 ＊1 4.2 Hex Nut Attached +0.2 Section x-x 15 1 4- R5 ※１：When the mating connector is 57F or 57FE series, the size ※1 is 16.20 +0.2 0 Panel Mounting Dimensions( Rear Mounting) Applicable Panel Thickness =1.60mm(max.) Part Number 57GE-20140- □□ 1（D40）-FA 57GE-20240- □□ 1（D40）-FA 57GE-20360- □□ 1（D40）-FA 57GE-20500- □□ 1（D40）-FA Number of Contact 14 24 36 50 A 44.00 54.78 67.74 82.85 B 36.00 46.78 59.74 74.85 C 25.40 36.20 49.00 64.20 D 12.954 23.749 36.703 51.816 E 29.30 40.10 53.00 68.20 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 0.1 n/2 n 1 n/2 +1 57GE Series Unit：mm ○ 40 Type Interface Receptacle 57GE-40360-751-FA Mating Style 40: Receptacle with Spring Latch Number of Contact 14, 24, 36, 50 FA: Lead Free Contact Tail Spacing 1: 4.2mm Contact Tail Length 5: 3.2mm Contact Plating 6: Contact Area: Au(0.76μm) over Ni Plating Tail Area: Sn-Ag over Ni Plating 7: Contact Area: Au(0.3 8μm) over Ni Plating   Tail Area: Sn-Ag over Ni Plating A No.n/2 Contact B C No.1 Contact B 12.0 15.1 2-φ3.2 0.1 0.1 n-φ0.8 0 Through Hole 0.1 +0.1 hole (2.1) 2.159 No.n Contact D X X 2-φ3.1max. hole No.n/2+1 Contact 2.159 （11.52） 0.08 D 0.1 PCB Mounting Dimensions Applicable PCB Thickness=1.6 0.19ｍｍ    8.7 13.5 1.5 3.2 0.3 4.2 B 0.1 0.1 +0.2 0 2.159 D 0.5 Section X­X E 3.3 2-R 4-R0.4 max. ※１：When the mating connector is 57F or 57FE series, the size ※1 is 16.20 +0.2 0  Panel Mounting Dimensions(Rear Mounting) Applicable Panel Thickness=1.6ｍｍ max. Part Number 57GE-40140- □ 51-FA 57GE-40240- □ 51-FA 57GE-40360- □ 51-FA 57GE-40500- □ 51-FA Number of Contact 14 24 36 50 A 44.00 54.78 67.74 82.85 B 36.00 46.78 59.74 74.85 C 25.4 36.2 49.0 64.2 D 12.954 23.749 36.703 51.816 E 35.30 46.08 59.04 74.15 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 15.5 ＊1 +0.2 0 4.2 n/2 n 1 n/2+1 57GE Series Unit：mm ○ 40 Type Interface Receptacle with Board Lock 57G E -40360 - 751( D15) -FA FA: Lead Free Mating Style 40: Receptacle with Spring Latch Number of Contact 14, 24, 36, 50 Contact Plating 6: Contact Area: Au(0.76μm) over Ni Plating Tail Area: Sn-Ag over Ni Plating 7: Contact Area: Au(0.3 8μm) over Ni Plating   Tail Area: Sn-Ag over Ni Plating Deviation (D15): with Board Lock    Pan-head Screw Assembled Contact Tail Spacing 1: 4.2mm Contact Tail Length 5: 3.2mm A No.n/2 Contact B 0.2 C No.1 Contact B 2-φ3.2 0.1 0.1 12.0 15.1 2.159 2.159 No.n Contact 0.08 (11.52) D No.n/2+1 Contact D 0.1 PCB Mounting Dimensions Applicable PCB Thickness=1.6 Ｘ (1.2) 8.7 0.19mm 13.5 1.5 2.159 Ｄ B (0.5) 3.2 (0.3) 4.2 B E 0.1 +0.2 0 0.1 Ｍ３ 0.5 Thread Ｘ 2-R Panel Mounting Dimensions(Rear Mounting) Applicable Panel Thickness=1.6ｍｍ max. Part Number 57GE-40140- □ 51（D15）-FA 57GE-40240- □ 51（D15）-FA 57GE-40360- □ 51（D15）-FA 57GE-40500- □ 51（D15）-FA Number of Contact 14 24 36 50 A 44.00 54.78 67.74 82.85 B 36.00 46.78 59.74 74.85 C 25.4 36.2 49.0 64.2 D 12.954 23.749 36.703 51.816 E 35.30 46.08 59.04 74.15 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 +0.2 16.2 0 Section Ｘ−Ｘ 4-R 0.4 max. 3.3 4.2 n-φ0.8 n/2 n 1 0.1 Through Hole (2.1) 0.1 hole n/2 +1