57RE-40140-730BD29B-FA

Right Angle Solder Termination Connectors 57RE Series OUTLINE ・57RE series is light-weight and low cost version of 57LE series to unify end disc latches with shell and insulator with locator. ・ Metalized shell for EMI Shield ・ Intermatable with each 57, 57F, 57FE, 57JE series plug connectors. ・ UL applied (File No. E72124) SPECIFICATIONS Rated Voltage Rated Current Dielectric Withstanding Voltage Insulation Resistance Contact Resistance Operating Temperature 500V AC（r.m.s.） 3A / Contact 1200V AC（r.m.s.）at 1 minute 1000M Ω (min.) at 500V DC 35m Ω (max.) -55℃∼ 105℃ RoHS MATERIAL/FINISH ITEM Insulator Shell Contact Bail Lock Compliant Compliant MATERIAL/FINISH PBT Resin(UL94V-0) / Black Steel or Brass / Ni Plating Copper Alooy / Au over Ni Plating Stainless Steel 090702 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 57RE Series Unit：mm ○ Standard Type (Less Ground Tab) 57RE-40360-830B-FA FA: Lead Free Contact Plating   7：Contact Area: Au(0.38 μ m）over Ni Plating    Tail Area: Sn-Ag over Nickel Plating   8： Contact Area: Au(Flash) over Ni Plating    Tail Area: Sn-Ag over Ni Plating Number of Contact：14, 24, 36, 50 A B  φ3.4 hole 8.13 B 0.50 C D Contact No. Part Number 57RE-40140- □ 30B-FA 57RE-40240- □ 30B-FA 57RE-40360- □ 30B-FA 57RE-40500- □ 30B-FA A 44.00 54.78 67.74 82.85 B 36.00 46.78 59.74 74.85 C D E 35.30 46.08 59.04 74.15 24 36 50 36.23 23.749 49.05 36.703 64.22 51.816 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 1 (Refer to page 5.) n/2 2.159 12.00 15.10 15.10 15.68 3.20 15.68 15.68 3.20 Ｍ × ５ Thread ３ ０． Contact No. +1 1 n +1 2.159 D 0.50 ○ With Thru-hole Ground Tab 57RE-40360-830B(D3B)-FA FA：Lead Free Panel Mounting Screw No Digit:: Steel acrew Attached   A: Steel screw Assembled   B: Less Screw Deviation (D3): Thru-hole Ground Tab    M3 0.5 Thread Type Contact Plating   7：Contact Area: Au(0.38 μ m）over Ni Plating    Tail Area: Sn-Ag over Nickel Plating   8： Contact Area: Au(Flash) over Ni Plating    Tail Area: Sn-Ag over Ni Plating Number of Contact：14, 24, 36, 50 A B B Part Number 57RE-40140- □ 30B（D3 □ )-FA 57RE-40240- □ 30B（D3 □ )-FA 57RE-40360- □ 30B（D3 □ )-FA 57RE-40500- □ 30B（D3 □ )-FA Number of Contact 14 24 36 50 A 44.00 54.78 67.74 82.85 B 36.00 46.78 59.74 74.85 C D E 35.30 46.08 59.04 n n/2 C D 2.159 25.36 12.954 36.23 23.749 49.05 36.703 64.22 51.816 74.15 2.159 0.50 D ※ The connector as above drawing is assembled panel maounting screws. ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 1 (Refer to page 5.) ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 12.00 1 11.30 14.90 9.10 0.50 8.13 8.60 14 25.36 12.954 15.40 Number of Contact 15.68 57RE Series Unit：mm ○ With M3 0.5 Threaded Ground Tab 57RE-40360-830B(D12B)-FA FA: Lead Free Panel Mounting Screw No Digit: Brass Screw Attached A: Brass Screw Assembled B: Less Screw C: Steel Screw Attached D: Steel Screw Assembled Deviation (D12): M3 0.5 Threaded Ground Tab M3 0.5 Thread Type Contact Plating   7：Contact Area: Au(0.38 μ m）over Ni Plating    Tail Area: Sn-Ag over Nickel Plating   8： Contact Area: Au(Flash) over Ni Plating    Tail Area: Sn-Ag over Ni Plating A B Ｍ × ５ Thread ３ ０． 8.13 B 0.50 11.80 C D Ｍ × ５Thread ３ ０． Number of Contact：14, 24, 36, 50 Part Number 57RE-40140- □ 30B（D12 □）-FA 57RE-40240- □ 30B（D12 □）-FA 57RE-40360- □ 30B（D12 □）-FA 57RE-40500- □ 30B（D12 □）-FA Number of Contact 14 24 36 50 A 44.00 54.78 67.74 82.85 B 36.00 46.78 59.74 74.85 C D E n/2 2.159 Contact No. 25.36 12.954 35.30 36.23 23.749 46.08 49.05 36.703 59.04 n +1 12.00 15.10 2.159 0.50 D 64.22 51.816 74.15 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 1 (Refer to page 5.) ※ The connector as above drawing is assembled panel maounting screws. ○ With Threaded Board Lock / Less Bail Locks 57RE-40360-830B(D8B)-FA FA: Lead Free Panel Mounting Screw No Digit: Brass Screw Attached A: Brass Screw Assembled B: Less Screw C: Steel Screw Attached D: Steel Screw Assembled Deviation (D8): Threaded Board Lock    M3 0.5 Thread Type     Less Spring Latch Contact Plating   7：Contact Area: Au(0.38 μ m）over Ni Plating    Tail Area: Sn-Ag over Nickel Plating   8： Contact Area: Au(Flash) over Ni Plating    Tail Area: Sn-Ag over Ni Plating Number of Contact：14, 24, 36, 50 A B Ｍ × ５ Thread ３ ０． 8.13 B 0.50 11.80 15.10 C D 2.159 n/2 1 Part Number 57RE-40140- □ 30B（D8 □）-FA 57RE-40240- □ 30B（D8 □）-FA 57RE-40360- □ 30B（D8 □）-FA 57RE-40500- □ 30B（D8 □）-FA Number of Contact 14 24 36 50 Contact No. A 44.00 54.78 67.74 82.85 B 36.00 46.78 59.74 74.85 C D E 35.30 46.08 59.04 74.15 12.00 25.36 12.954 36.23 23.749 49.05 36.703 64.22 51.816 n +1 2.159 D 0.50 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 2 (Refer to page 5.) ※ The connector as above drawing is assembled panel maounting screws. ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 3.20 15.68 8.60 15.40 15.68 3.20 15.68 1 8.60 15.40 15.68 57RE Series Unit：mm ○ With Threaded Board Lock 57RE-40360-830B(D15B)-FA FA: Lead Free Panel Mounting Screw 15.68 15.10 8.60 15.40 A B ＃ − ０ Ｎ Thread ４ ４Ｕ Ｃ   B: Less Screw Deviation (D15): Threaded Board Lock #4-40UNC Thread Type B Contact Plating 11.80 12.00   8： Contact Area: Au(Flash) over Ni Plating    Tail Area: Sn-Ag over Ni Plating Number of Contact：14, 24, 36, 50 Part Number 57RE-40140- □ 30B（D15 □）-FA 57RE-40240- □ 30B（D15 □）-FA 57RE-40360- □ 30B（D15 □）-FA 57RE-40500- □ 30B（D15 □）-FA Number of Contact 14 24 36 50 A B C 25.36 36.23 49.05 64.22 D E 2.159 C D Contact No. 44.00 36.00 54.78 46.78 67.74 59.74 82.85 74.85 12.954 35.30 23.749 46.08 36.703 59.04 n +1 51.816 74.15 2.159 D 0.50 3.20 Ｍ ×0.5 Thread ３ ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 2 (Refer to page 5.) 57RE-40360-830B(D29B)-FA FA: Lead Free Panel Mounting Screw No Digit: Brass Screw Attached A: Brass Screw Assembled B: Less Screw C: Steel Screw Attached D: Steel Screw Assembled Deviation (D29): Threaded Board Lock M3 0.5 Thread Type Ａ Ｂ Ｂ 0.5 11.3 Contact Plating   7：Contact Area: Au(0.38 μ m）over Ni Plating    Tail Area: Sn-Ag over Nickel Plating   8： Contact Area: Au(Flash) over Ni Plating    Tail Area: Sn-Ag over Ni Plating Ｃ Ｄ 2.159 Number of Contact：14, 24, 36, 50 n +1 Contact No. 2.159 Ｄ 0.5 ※ The connector as above drawing is assembled panel maounting screws. Part Number 57RE-40140- □ 30B（D29 □ )-FA 57RE-40240- □ 30B（D29 □ )-FA 57RE-40360- □ 30B（D29 □ )-FA 57RE-40500- □ 30B（D29 □）-FA Number of Contact 14 24 36 50 A 44.00 54.78 67.74 82.85 B 36.00 46.78 59.74 74.85 C 25.36 36.23 49.05 64.22 D 12.954 23.749 36.703 51.816 E 35.30 46.08 59.04 74.15 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 2 (Refer to page 5.) ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 3.20 12.0 15.1 15.68 n/2 1 9.1 14.9 8.13 15.68 15.68 n/2 1 0.50   7：Contact Area: Au(0.38 μ m）over Ni Plating    Tail Area: Sn-Ag over Nickel Plating 8.13 57RE Series Unit：mm ○ With Threaded Board Lock / Small Bail Locks 57RE-40360-830B(D7B)-FA FA: Lead Free Panel Mounting Screw Ａ B: Less Screw Deviation (D7): Threaded Board Lock     M3 0.5 Thread Type Small Bail Locks Contact Plating   7：Contact Area: Au(0.38 μ m）over Ni Plating    Tail Area: Sn-Ag over Nickel Plating   8： Contact Area: Au(Flash) over Ni Plating    Tail Area: Sn-Ag over Ni Plating （Dia. of Screw head） Ｂ Ｍ ×0.5 Thread ３ 0.5 11.3 Ｃ Ｄ 2.159 Number of Contact：14, 24, 36, 50 4.2 Part Number 57RE-40140- □ 30B-(D7 □ )-FA 57RE-40240- □ 30B （D7 □ )-FA 57RE-40360- □ 30B （D7 □ )-FA 57RE-40500- □ 30B （D7 □ )-FA Contact 14 24 36 50 A B C D E n +1 44.00 36.00 54.78 46.78 67.74 59.74 82.85 74.85 25.36 12.954 35.30 36.23 23.749 46.08 49.05 36.703 59.04 64.22 51.816 74.15 Contact No. 2.159 Ｄ 0.5 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 2 (Refer to page 5.) ※ The connector as above drawing is assembled panel maounting screws. ○ Panel Cut-out Dimensions & PCB Mounting Dimensions Type １ B +0.2 0 Type 2 B +0.2 0 +0.2 0 Ｒ５ ０． ０(max.) Ｒ５ ０． ０(max.) 15.50 ※１ ０ 2ー ２． ±０． Ｒ５ ０１ ０ 2ー ２ ±０． ３． ０１ ０ 2ー ２． ±０． Ｒ５ ０１ ０ 2ー ２ ±０． ３． ０１ Panel Cut-out Dimensions (Front Mounting) Thickness １． ６ ０(max.) Panel Cut-out Dimensions (Front Mounting) Thickness１． ６ ０(max.) B±0.1 E Ｒ５ ０． ０(max.) +0.2 0 B±0.1 E +0.2 0 +0.2 0 15.50 ５ 2ー １． ±０． Ｒ６ ００ ５ 2ー １． ±０． Ｒ６ ００ Panel Cut-out Dimensions (Rear Mounting) Thickness 1． ６ ０(max.) Panel Cut-out Dimensions (Rear Mounting) Thickness １． ６ ０(max.) 2ー ３． ±０．０ φ２ ０１ （2.145） 4.29±0.10 （2.145） ０ 2ー ３． ±０． φ２ ０１ ｎ φ0.80±0.10 − 4.29±0.10 B±0.10 B±0.10 ｎ φ0.80±0.10 − 2.159±0.08 D±0.10 2.159±0.08 D±0.10 2-∅5.5 Land PCB Mounting Dimensions Thickness１． ±0.19 ６ ０ ※１：When the mating connector is 57F or 57FE series, the size ※1 is 16.20 +0.2 0 PCB Mounting Dimensions Thickness 1． ±0.19 ６ ０ ※１：When the mating connector is 57F or 57FE series +0.2    the size ※1 is 16.20 0 . . ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 15.50 ※１ ※１ +0.2 0 Ｒ５ ０． ０(max.) ※１ 15.50 +0.2 0 3.20 12.0 15.1 15.68 Number of n/2 1 9.1 14.9 8.13 15.68 No Digit: Steel Screw Attached A: Steel Screw Assembled