BNC Series
BNC Type Connectors
●BNC series is most widely used as 50 Ω coaxial
cable connectors.
●This series is used specially for interface of fre-
quent fit-in/pull-out instruments by small size/ light weight bayonet lock mechanism. Note: BNC series is intermateable with BNC75 series. (75Ω group) ●If 75 Ω cable is used for this series, the frequency to be applied must be below 200MHz. For more than 200MHz, BNC75 series must be used.
CONFORMING STANDARD
JIS-C-5412、 MIL-C-39012、 DSP-C-6202、 NTTSpec No.2095
SPECIFICATION
Characteristic Impedance Dielectric withstanding voltage Insulation resistance Contact resistance VSWR 50Ω 1500V AC (rms) for 1 minute 1000MΩmin. at 500V DC 3mΩ max. 1.3max. at DC~2GHz
Specifications depends on each connector although these are basic specifications.
MATERIAL/FINISH
Shell (Body) Contact (male) Contact (female) Insulators Gaskets Copper alloy/Silver or Nickel plating Copper alloy/Silver or Gold plating Copper alloy/Silver or Gold plating PTFE Silicone rubber
Please ask us for the cable assemblies to assure its performance.
● ● 1
BNC Series
Unit : mm
■ Plug Clamp Type
φ14.5 φA
P/N BNC-P-3
Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-62/U RG-62/U RG-59/U RG-62/U RG-59/U RG-62/U
φA 6.4 6.4 6.4 5.4 5.4 6.6 6.6 6.55 6.55
(L) 25.0 25.0 25.0 27.0 27.0 26.2 26.2 24.6 24.6
Finish Shell Ag Ni Ni Ag Ni Ag Ni Ag Ni Contact Ag Ag Au Ag Ag Ag Ag Ag Ag
(L)
BNC-P-3-Ni BNC-P-3-NiCAu BNC-P-58U BNC-P-58U-Ni BNC-P-62U BNC-P-62U-Ni UG-260/U UG-260/U-Ni
P/N
φ14.5 φA
Applicable Cable 3D-2W 3C-2W 3D-2W 3C-2W 3C-2T 3C-2T
φA 7.1 7.1 8.0 8.0
(L) 29.1 29.1 30.0 30.0
Finish Shell Ag Ni Ag Ni Finish Shell Ag Ni Ag Ni Ni Ni Ag Ag Ni Contact Ag Ag Ag Ag Ag Ag Ag Ag Ag Contact Ag Ag Ag Ag
BNC-P-3W BNC-P-3W-Ni-1 BNC-P-3CT BNC-P-3CT-Ni
(L)
φ17.5
φ14.5
P/N BNC-P-5
φA
Applicable Cable 5D-2V 5C-2V 5D-2V 5C-2V 5D-2W 5C-2W 5D-2W 5C-2W 5C-FB 5D-FB 5C-2T 7C-2V 7C-2V
φA 8.6 8.6 9.2 9.2 8.6 8.1 10.1 11.25 11.25
(L) 37.0 37.0 37.0 37.0 37.0 39.0 37.0 37.0 37.0
(L)
BNC-P-5-Ni BNC-P-5W BNC-P-5W-Ni BNC-P-5CFB BNC-SP-5DFB BNC-P-5C2T BNC-P-7 BNC-P-7-Ni
● ● 2
BNC Series
Unit : mm
■ Plug Crimp Type
Applicable Cable 1.5D-2V 1.5C-2V 1.5D-2V 1.5C-2V 2.5D-2V 2.5C-2V 2.5D-2V 2.5C-2V RG-179/U RG-179/U 1.5D-2V 1.5C-2V 2.5D-2V 2.5C-2V RG-188A/U RG-174/U Finish Shell Ag Ni Ag Ni Ag Ni Ni Ni Ni Ni Contact Ag Ag Ag Ag Ag Ag Au Au Au Au Finish Shell Ni Ni Ni Ni Ni Ni Ni Ni Ni Finish Shell Ag Ni Ni Ni Contact Ag Ag Au Au Contact Au Au Au Au Au Au Ag Au Au Hand Crimp Tool P/N CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100
φ14.5
P/N BNC-P-1.5V-CR
φA 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
φA
(31.7)
BNC-P-1.5V-CR-Ni BNC-P-2.5V-CR BNC-P-2.5V-CR-Ni BNC-P-179U-CR BNC-P-179U-CR-Ni BNC-P-1.5V-CR-NiCAu BNC-P-2.5V-CR-NiCAu BNC-P-188A/U BNC-P-174U-CR
φ14.5
P/N BNC-P-1.5CQEW-CR10 BNC-P-1.5D-CR10 BNC-P-3C-CR10-BOOT BNC-P-3D-CR10-BOOT BNC-P-58U-CR10 BNC-SP-1.5DW-CR1 BNC-SP-1.5D2W-CR10-1 BNC-P-1.5D2W-CR10-201 BNC-P-3D-CR10
φA
Applicable Cable 1.5C-QEW 1.5D-XV 1.5D-QEV 3C-2V 3D-2V RG-58/U RG-58A/U 1.5D-QEW 1.5D-QEW 1.5D-2W 1.5D-QEW 3D-2V
φA 5.5 4.0 7.1 7.1 6.3 4.8 5.5 5.5 7.1
(L) 24.3 23.3 24.3 24.3 24.3 29.2 24.0 24.3 24.3
Hand Crimp Tool P/N CR-H-1100 CR-H-1120 CR-H-1116 CR-H-1116 CR-H-1115 CR-H-1156 CR-H-1100 CR-H-1100 CR-H-1116
Note Deltamate Deltamate Deltamate Deltamate ― ― ― Deltamate ―
(L)
P/N
φ14.5 φA
Applicable Cable 3C-2V 3C-2V 5C-2V 5C-2V
φA 7.0 7.0 9.5 9.5
(L) 28.0 28.0 28.7 28.7
Hand Crimp Tool P/N CR-H-1102 CR-H-1102 CR-H-1130 CR-H-1130
Note ― ― boot (W) boot (B)
BNC-P-3C-CR1 BNC-P-3C-CRI-Ni BNC-P-5C-CR10 BNC-P-5C-CR10-B
(L)
● ● 3
BNC Series
Unit : mm
■ Right Angle Plug Clamp Type
Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V 5D-2V 5C-2V 5D-2V 5C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U Finish Shell Ag Ag Ni Ni Ag Ni Ag Ni Ag Contact Ag Au Au Ag Ag Ag Ag Ag Ag
(25)
P/N BNC-LP-3
φA (33)
φA 6.4 6.4 6.4 6.4 8.6 8.6 5.38 5.38 5.4
BNC-LP-3-CAu BNC-LP-3-NiCAu BNC-LP-3-Ni BNC-LP-5 BNC-LP-5-Ni BNC-LP-58U BNC-LP-58U-Ni BNC-LP-55U
(27)
P/N BNC-LP-5
(33)
Applicable Cable 5D-2V 5C-2V 5D-2V 5C-2V
Finish Shell Ag Ni Contact Ag Au
BNC-LP-5-Ni
(33) (φ14.3)
P/N BNC-LP-5D2W
Applicable Cable 5D-2V 5C-2V
Finish Shell Ni Contact Au
(40)
(φ17.5)
● ● 4
BNC Series
Unit : mm
■ Jack Clamp Type
φA
P/N BNC-J-3 BNC-J-3-Ni BNC-J-58U BNC-J-62U UG-261/U
Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V RG-55/U RG-58/U RG-59/U RG-62/U RG-59/U RG-62/U
φA 6.4 6.4 5.4 6.55 6.6
(L) 28.5 28.5 28.6 28.6 28.6
Finish Shell Ag Ni Ag Ag Ag Contact Ag Ag Ag Ag Ag
(L)
φ17.5
P/N
15.8 (38.0)
Applicable Cable 5D-2V 5C-2V
Finish Shell Ag Contact Ag
BNC-J-5
Crimp Type
Applicable Cable 2.5D-2V 2.5C-2V 1.5D-2V 1.5D-QEV RG-55/U RG-58/U Finish Shell Ag Ag Ag Contact Ag Ag Ag Hand Crimp Tool P/N CR-H-1100 CR-H-1100 CR-H-1105
φA
P/N BNC-J-2.5-CR
(34.5)
φA 5.5 5.5 6.3
BNC-J-1.5V-CR BNC-J-58U-CR1
● ● 5
BNC Series
Unit : mm
■ Panel Jack Clamp Type
4-φB
P/N
□ 17.5 12.7 φA
Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U
φA 6.4 6.4 5.4 5.4 5.4 6.55
(L) 28.5 28.5 27.0 27.0 27.0 28.6
φB 3.0 3.0 3.0 3.0 3.0 3.0
Finish Shell Ag Ni Ag Ni Ni Ag Contact Ag Ag Ag Ag Au Ag
BNC-PJ-3 BNC-PJ-3-Ni BNC-PJ-58U BNC-PJ-58U-Ni BNC-PJ-58U-NiCAu BNC-PJ-62U
2.3
15.8 (L)
12.7
Mounting Hole
4-φ3.0 -0
+0.1
φ11.5 -0
+0.1
12.7 ± 0.05
12.7 ± 0.05
4-φ3.0
P/N
φ14.0 13.5
Applicable Cable 3D-2W 3C-2W 3D-2W 3C-2W
Finish Shell Ag Ni Contact Ag Ag
BNC-PJ-3W
2.3 15.8 (31.0) 13.5 □ 19.0
BNC-PJ-3W-Ni-1
Mounting Hole
4-M2.6 × 0.45
φ14.5 -0
+0.1
13.5 ± 0.05
13.5 ± 0.05
4-φ3.2
φ17.5
18.2
P/N BNC-PJ-5 BNC-PJ-5D2W
Applicable Cable 5D-2V 5C-2V 5D-2W 5C-2W
(L) 38.0 40.6
Finish Shell Ag Ag Contact Ag Ag
2 15.77 (L)
18.2 □ 25.3
Mounting Hole
4-φ3.2 -0
+0.1
φ11.5 -0
+0.1
18.2 ± 0.05
18.2 ± 0.05
● ● 6
BNC Series
Unit : mm
■ Panel Jack Crimp Type
4-φ3.0
P/N
□ 17.5 φ5.5 12.7
Applicable Cable 1.5D-2V 1.5C-2V 1.5D-2V 1.5C-2V 2.5D-2V 2.5C-2V 2.5D-2V 2.5C-2V RG-179B/U 1.5D-QEW 1.5D-QEW
Finish Shell Ag Ni Ag Ni Ag Ni Ni Contact Ag Ag Ag Ag Ag Au Ag
Hand Crimp Tool P/N CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100
Mounting Hole R R R R R N N
BNC-PJ-1.5V-CR BNC-PJ-1.5V-CR-Ni BNC-PJ-2.5V-CR BNC-PJ-2.5V-CR-Ni
2.3
15.8 12.7
(34.5)
Mounting Hole R
4-φ3.0 -0
+0.1
12.7 ± 0.05
φ11.5 -0
+0.1
BNC-PJ-179BU-CR BNC-PJ-1.5W-CR-DI BNC-PJ-1.5W-CR-Ni
12.7 ± 0.05
Mounting Hole N
4-φ3.0 -0
+0.1
φ12.0 -0
+0.1
12.7 ± 0.05
12.7 ± 0.05 4-φ3.0 12.7 □ 17.5
φ10 φ6
P/N BNC-PJ-1.5DW-CR1
Applicable Cable 1.5D-QEW
Finish Shell Ni Contact Au
Hand Crimp Tool P/N CR-H-1156
2.29
15.77
12.7
(30.1)
Mounting Hole
4-φ3.0 -0
+0.1
φ11.5 -0
+0.1
12.7 ± 0.05
12.7 ± 0.05
● ● 7
BNC Series
Unit : mm
■ Receptacle
4-φB
P/N
φ1.4 12.7
φB 3.1 3.1 M2.6 M2.6
Finish Shell Ag Ni Ag Ni Contact Ag Ag Ag Ag
BNC-R BNC-R-Ni UG-290/U UG-290/U-Ni-1
2.3
15.8 26.3
12.7 □ 17.5
Mounting Hole
4-φ3.0 +0.1
-0
φ9.0
+0.1 -0
12.7 ± 0.05
12.7
12.7 ± 0.05
P/N
4-φ3.0 □ 17.5 φ1.1 12.7
Finish Shell Ag Ni Contact Ag Ag
BNC-LR
23.4
BNC-LR-Ni
23
Mounting Hole
4-φ3.0 +0.1
-0
φ9.0
+0.1 -0
12.7 ± 0.05
12.7 ± 0.05
□ 15.0
P/N
2.3 2.5 13.3
Finish Shell Ni Contact Ag
Note Locating pins(4pcs):Tinlead plating Locating pins(4pcs):Ag plating Locating pins(4pcs):Tinlead plating
BNC-R-PC-4
PCB Mounting Dimensions
5-φ1.2
+0.1 -0
± 0.05
BNC-R-PC-4-Ag
Ni
Ag
BNC-R-PC-4-CAu
10.16 -0
+0.1
Ni
Au
5.08 ± 0.05 10.16 -0
+0.1
5.08
● ● 8
BNC Series
Unit : mm
■ Receptacle
10.16
□ 15.0
10.16
P/N
23.4
Finish Shell Ni Contact Ag
Note Locating pins(4pcs):Tinlead plating
BNC-LR-PC-4
2.5 19.1
PCB Mounting Dimensions
5-φ1.2 +0.1 -0 5.08 ± 0.05
5.08 ± 0.05 10.16 -0
+0.1
10.16 -0 4-φ3.0
+0.1
P/N
φ1.1 12.7
Finish Shell Ag Ni Contact Ag Ag
BNC-PR BNC-PR-Ni
2.3
18.0 (28.5) 12.7 □ 17.5
Mounting Hole
4-φ3.2 +0.1
-0
φ9.0
+0.1 -0
12.7 ± 0.05
12.7 ± 0.05
● ● 9
BNC Series
Unit : mm
■ Bulkhead Receptacle
Hex.12.7
P/N
φ12.7 φ1.4
Finish Shell Ag Ni Ni Contact Ag Ag Au
BNC-RB2 BNC-RB2-Ni BNC-RB2-NiCAu
1.5 12.6 26.3
Panel Thickness:1.2 ~ 3.5
Mounting Hole
φ11.3 -0
+0.1
Hex.12.7
10.3
P/N
φ12.7 φ1.4
Finish Shell Ag Ni Contact Ag Ag
UG-625/U UG-625/U-Ni
1.5 12.6 26.3
Panel Thickness:1.2 ~ 3.5
Mounting Hole
φ11.3 -0
+0.1
Hex.12.7
10.3
P/N
φ14.3 φ1.1
Finish Shell Ag Ni Contact Ag Ag
UG-604/U UG-604/U-Ni-1
1.0 13.7 26.3
Panel Thickness:0.7 ~ 2.4
Mounting Hole
φ9.6 -0
+0.1
8.5 -0
+0.1
● ● 10
BNC Series
Unit : mm
■ Bulkhead Receptacle
Hex.12.7
P/N
φ14.5 φ1.3
Finish Shell Ag Ni Contact Ag Ag
Note Moisture-Proof Type with flange and O ring Moisture-Proof Type with flange and O ring
UG-657/U UG-657/U-Ni
2.44 15.1 33
Panel Thickness:2.2 ~ 6.0
Mounting Hole
φ9.92
+0.1 -0
8.8 -0
+0.1
Hex.12.7
P/N
φ12.7 φ1.6
Finish Shell Ag Ni Contact Ag Au
UG-1094/U UG-1094/U-D1
1.2 11.9 27
Panel Thickness:2.2 ~ 3.1
Mounting Hole
φ9.6
+0.1 -0
Hex.12.7
8.8 -0
+0.1
P/N
φ14.5 φ1.3
Finish Shell Ag Ni Contact Ag Ag
Note Moisture-Proof Type with flange and O ring Moisture-Proof Type with flange and O ring
BNC-RBP1 BNC-RBP1-Ni
2.5 15.2 32.6
Panel Thickness:2.6 ~ 6.4
Mounting Hole
φ9.6 -0
+0.1
8.5 -0
+0.1
● 11 ●
BNC Series
Unit : mm
■ Bulkhead Receptacle
Hex.12.7
P/N
φ14.4 φ14.7 φ1.1
Finish Shell Ag Ni Contact Ag Ag
Note with flange and O ring with flange and O ring
BNC-RB BNC-RB-Ni
2.3 17.4 33
Panel Thickness:2.2 ~ 7.0
Mounting Hole
φ9.6 -0
+0.1
8.5 -0
+0.1
● ● 12
BNC Series
Unit : mm
■ Cap
A
P/N BNC-C BNC-C-Ni
(57)
Finish Ag Ni Ag Ni Ag Ni
A 17.9 17.9 18.5 18.5 17.8 17.8
CW-123A/U CW-123A/U-Ni BNC-CS BNC-CS-Ni
φ 3. 7
P/N BNC-JC
(20.5)
Finish Ag Ni
BNC-JC-Ni
(90)
● 13 ●
很抱歉,暂时无法提供与“BNC-PJ-1.5V-CR-Ni”相匹配的价格&库存,您可以联系我们找货
免费人工找货