BNC75-R-A

BNC75 Series 75Ω BNC Type Connectors ●BNC75 series are connectors for 75 Ω group of BNC series (50Ω group). ●Intermateable with BNC series. ●Easy interface is established between test instruments, broadcasting eqipment, CATV and HDTV by bayonet lock mechanism. SPECIFICATION Characteristic Impedance Dielectric withstanding voltage Insulation resistance Contact resistance VSWR 75Ω 1500V AC (rms) for 1 minute 1000MΩmin. at 500V DC 3mΩ max. 1.3max. at DC～1GHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Shell (Body) Contact (male) Contact (female) Insulators Gaskets Copper alloy/Nickel or Silver plating Copper alloy/Silver or Gold plating Copper alloy/Silver or Gold plating PTFE Silicone rubber Please ask us for the cable assemblies to assure its performance. ●　 ● 1 BNC75 Series Unit : mm ■ Plug 　 P/N φ14.5 φA Applicable Cable 1.5C-2W 1.5CQEW 2.5C-XW 2.5C-2W 3C-2W 3C-2WS φA 5.50 6.25 7.90 Finish Shell Ni Ni Ni Contact Au Au Au Hand Crimp Tool P/N CR-H-1100 CR-H-1105 CR-H-1132 BNC75-P-1.5CQEW 26.3 BNC75-P-2.5CW-CR10B BNC75-P-3CW-CR10B φ14.5 P/N BNC75-P-3C2W-CR10 BNC75-P-3C-CR10 BNC75-P-3C2W-CR10A φA Applicable Cable 3C-2W 3C-2V 3C-2W 3C-2WS φA 7.9 7.1 7.9 Finish Shell Ni Ni Ni Contact Au Au Au Hand Crimp Tool P/N CR-H-1135 (*1) CR-H-1116 (*1) CR-H-1135 (*1) Note Deltamate Deltamate Deltamate 24.3 *1:Interference tool P/N 89134 is necessary P/N φ17.5 φ14.5 Applicable Cable 5C-2V 5C-2W 5C-FB A 37 37 39 Finish Shell Ag Ni Ni Contact Ag Ag Ag BNC75-P-5 BNC75-P-5C2W BNC75-SP-5CFB A φ14.5 P/N BNC75-SP-1.5CCA-EXBV φ4.0 Applicable Cable 1.5CCA-EXBV Finish Shell Ni Contact Au Hand Crimp Tool P/N CR-H-1101 30 ■ Jack 　 φ11.7 P/N BNC75-J-2.5C2W-CR10A 32.5 Applicable Cable 2.5C-XW 2.5C-2W Finish Shell Ni Contact Au Hand Crimp Tool P/N CR-H-1105 ● 　● 2 BNC75 Series Unit : mm ■ Bulkhead Jack 　 P/N BNC75-BJ-2.5C2W-CR1 2 33.2 18 φ15.5 Applicable Cable 2.5C-2W 2.5C-QEW Finish Shell Ni Contact Au Hand Crimp Tool P/N ■ Panel Jack 4-φ3.1 P/N 12.7 Applicable φA Cable 3C-2V L Finish Shell Ni Ni Contact Au Au Hand Crimp Tool P/N CR-H-1132 CR-H-16776 BNC75-PJ-3CW-CR10B BNC75-PJ-3C2V-CR1 3C-2WS 11.8 32.6 11.3 30.0 2.3 L 14.0 12.7 17.5 Mounting Hole 4-φ3.1 +0.1 -0 φA -0 +0.1 12.7 ± 0.05 12.7 ± 0.05 4-φ3 P/N 12.7 Applicable Cable 1.5CCA-EXBV 1.5C-2V 1.5C-QEV 2.5C-2V L 34.5 33.0 34.5 Finish Shell Ni Ni Ni Contact Au Au Ag Hand Crimp Tool P/N CR-H-1101 CR-H-1101 CR-H-1110 BNC75-PJ-1.5CCA-EXBV BNC75-PJ-1.5CV-CR2 BNC75-PJ-2.5V-CR-Ni 2.3 L 15.8 12.7 17.5 Mounting Hole 4-φ3.1 +0.1 -0 φ11.5 +0.1 -0 12.7 ± 0.05 12.7 ± 0.05 ●　 ● 3 BNC75 Series Unit : mm ■ Receptacle 　　 4-φ3.1 12.7 P/N BNC75-R-A Finish Shell Ni Contact Au 2.3 15.8 26.3 12.7 17.5 Mounting Hole 4-φ3.0 -0 +0.1 φ9.0 -0 +0.1 12.7 ± 0.05 12.7 ± 0.05 ● 　● 4