CE02-2A22-14P-D

Waterproof Circular Connectors CE02-2A Series Conforming Standard MIL-DTL- 5015 ◆ OUTLINE CE02-2A Series is intermateable with D/MS series (MILDTL-5015 compatible). In order to correspond to various environments whereindustrial equipment is set up, CE02-2A series connector withstands moisture, oil and vibration by  Wa t e r p r o o f using synthetic rubber at the front insert. This connector is ideal for use under the external condition such as industrial equipment which needs to withstand moisture, oil and dust. IP67 ◆ FEATURES ● CE02-2A series is interchangeable with D/MS series receptacle because the mounting pattern is same. ● The insert is a three-piece design. The contact will not be fallen out and subsided when used under the Lock Type Threaded Coupling normal operating condition. ● The insert which is made with synthetic rubber can be used at a temperature up to 125℃ . ● When CE02-2A is mating with plug connector of CE02-6A, D/MS(D190) or CE05 series, it will conform to IP67 ◆ SPECIFICATIONS Contact Size Rated Current Rated Voltage ＃ 16 13A / Contact 250V AC(r.m.s.) 350V DC ＃ 12 23A / Contact 500V DC 1500V AC(r.m.s.) at 1 minute. IP67 − 40℃ to ＋ 125℃ 1,000M Ω min. at 500V DC 350V AC(r.m.s.) ＃8 46A / Contact Dielectric Withstanding Voltage 1000V AC(r.m.s.) at 1 minute. Insulation Resistance Waterproof Rating Operating Temperature ◆ MATERIAL / FINISH Item Shell Front Insert Middle Insert Rear Insert Contact Flange Gasket Gasket RoHS Compliant Compliant Material / Finish Aluminum Alloy / Black Trivalent Chromium Treatment Synthetic Rubber (Silcone) PPS Resin PPS Resin Copper Alloy / Silver Plating Synthetic Rubber (Silcone) Synthetic Rubber (Silcone) ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. 090706 http://www.ddknet.co.jp CE02-2A Series Unit：mm ○ Insert Arrangements MIL-DTL-5015 Compatible, Pin insert Only Number of Contact Insert No. 4 18-10 6 18-12 7 20-15 17 20-29 Ａ Insert Arrangement Ｄ Ａ Ｆ Ｅ Ｄ Ｃ Ａ Ｆ Ｅ Ａ Ｂ Ｇ Ｌ Ｋ Ｊ Ｍ Ｔ Ｓ Ｈ Ｎ R Ｂ Ｐ Ｃ Ｄ Ｅ Ｃ Ｂ Ｂ Ｇ Ｄ Ｃ Ｆ Contact Size Number of Contact Insert No. ＃ 12 ＃ 16 ＃ 12 ＃ 16 19 22-14 4 22-22 8 22-23 7 24-10 Ｌ Insert Arrangement Ｊ Ｍ Ｕ Ｔ Ｎ Ｐ Ｓ Ｇ Ｒ Ｆ Ａ Ｂ C Ｄ Ｅ D A F G H E A B Ｆ Ａ Ｋ Ｅ D C Ｇ Ｄ Ｃ Ｂ Ｈ C B Contact Size ＃ 16 ＃8 ＃ 12 ＃8 Contact Size Symbol Note : Each of the inserts in the CE02 series is viewed from its coupling side. All keys are set at their standard positions. １６ ＃１２ ＃８ ＃４ ＃０ ○ Alternate Insert Positions Insert No. 18-10P 18-12P 20-15P 20-29P 22-14P 22-22P 22-23P 24-10P Contact Size/ Number of Contact ＃ 12 / 4 ＃ 16 / 6 ＃ 12 / 7 ＃ 16 / 17 ＃ 19 / 19 ＃ 8/4 ＃ 12 / 8 ＃ 8/ 7 35 80 280 80 80 80 80 110 110 250 250 Alternate Insert Key Positions W X 120 Y 240 X Z θ=120 280 280 C D 280 B 280 A 18 -1 0 Alternate insert key positions, W, X, Y and Z prevent cross-plugging problems in applications requiring the use of more than one connector of the same size and arrangement. Front View of Pin Insert (For Model CE02-2A18-10PX-D) Diagram Pin Insert Receptacle Shell Retaining Ring ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 CE02-2A Series Unit：mm ○ Box Receptacle Connector C E0 2 -2 A20-29PWS-D ① ② ③ ④⑤⑥ ⑦ ① Shell Style ② Shell Size ③ Insert Number ④ Contact Style ⑤ Alternate Insert Position 2A：Box Receptacle 18, 20, 22 and 24 Refer to page 2. P : Pin Contact Omit : Standard Position W, X, Y, Z : Altenate Insert Position Omit : Without Gasket S : With Gasket D : Black Trivalent Chromium Treatment ⑥ Gasket ⑦ Finish A Thread F H □J 0.15 □K 4-φL B (E) CD Part Number CE02-2A18-10P-D CE02-2A18-12P-D CE02-2A20-15P-D CE02-2A20-29P-D CE02-2A22-14P-D CE02-2A22-22P-D CE02-2A22-23P-D CE02-2A24-10P-D A 1 1/8-18UNEF-2A 1 1/8-18UNEF-2A 1 1/4-18UNEF-2A 1 1/4-18UNEF-2A 1 3/8-18UNEF-2A 1 3/8-18UNEF-2A 1 3/8-18UNEF-2A 1 1/2-18UNEF-2A B 19.2 19.2 19.2 19.2 19.2 19.2 19.2 20.8 C 3.35 3.35 3.35 3.35 3.35 3.35 3.35 3.35 D 7.44 7.44 7.44 7.44 7.44 7.44 7.44 7.44 （E） 30.03 30.03 30.03 30.03 30.03 30.03 30.03 31.59 F max. 13.8 11.5 13.8 11.5 11.5 16.9 13.8 15.3 G 0.5 25.4 25.5 28.6 28.6 31.8 31.8 31.8 34.9 H min. 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 J 0.15 26.97 26.97 29.36 29.36 31.75 31.75 31.75 34.93 K 34.9 34.9 38.1 38.1 41.3 41.3 41.3 44.4 L +0.25 -0.12 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.73 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 φG