CM02-8DP5SDD1-FG

厂商：
DDK
封装：
描述：
CM02-8DP5SDD1-FG - DeviceNet Micro-Style Connectors - DDK Ltd.

数据手册：

下载CM02-8DP5SDD1-FG.pdf

立即购买

详情介绍
数据手册
价格&库存

CM02-8DP5SDD1-FG 数据手册

DeviceNet Micro-Style Connectors CM02 Series Conforming Standard DeviceNet ◆ OUTLINE The CM02 series is a Micro-style connector for Wa t e r p r o o f IP 67 use in a DeviceNet communication network. These products provide connections between simple industrial devices such as sensor, actuators and higher-level devices such as controllers. This connector system is also recommended for CCLink network and can be used in harsh environmental conditions, having IP67 rated for protection against moisture, oil and dust. ◆ FEATURES ・Crimp termination for the cable mount plugs and jacks ・Receptacle : Soldering Lock Type Threaded Coupling ・Protection from wiring errors by color-coding the contact holder with red, white, blue and black ・Available style are cable mount plug with socket contacts, cable mount jack with pin contacts, T tap, panel mount receptacle with pin contacts, panel mount plug receptacle with socket contacts, terminating resistor and dust cap ◆ SPECIFICATIONS Rated Current Rated Voltage Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Range Waterproof No. of Contacts 3A/contact 24V DC 500V AC(r.m.s) for 1 minute 1000M Ω min. at 250V DC - 40℃ to +85℃ IP67 when mated 5 Physical Conﬁguration of Cables For Example Jacket ＤＣ Power Insulation Color：Black Braid Shield AL / MY Shield Data Insulation Color：White AL / MY Shield Data Insulation Color：Blue Conductor Data Insulation Colors : Blue & Yellow Ground Insulation Color : White AL / MY Shield Braid Shield Jacket Drain Wire ＤＣ Power Insulation Color：Red Drain Wire DeviceNet Thick Cable ◎ Speciﬁcations and/or dimensions in this catalog are subject to change without notice. Your checking the latest speciﬁcations with our drawings would be highly appreciated. 090206 CC-Link Cable http://www.ddknet.co.jp RoHS MATERIAL/FINISH Item Insulator Contact Coupling Ring Backshell Nut Contact Holder Backshell Clamp Nut O-Ring Gasket Bushing Compliant Compliant Jack (With Pin Contacts) Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Copper Alloy/Gold Plating Aluminum Alloy/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Synthetic Rubber/Black Synthetic Rubber/Black Synthetic Rubber/Black for Socket Synthetic Rubber/Black Resistor (With Pin or Socket Contacts) Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Copper Alloy/Gold Plating Aluminum Alloy/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plug (With Socket Contacts) Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Copper Alloy/Nickel Plating Aluminum Alloy/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Synthetic Rubber/Black Synthetic Rubber/Black Synthetic Rubber/Black Item Insulator Contact Coupling Ring Shell Nut Washer Gasket(Mating Side) Gasket(Mounting Side) Overmolding Resin “T”Tap Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Zinc Alloy/Nickel Plating Receptacle (With Pin Contacts) Plug Receptacle (With Socket Contacts) Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Copper Alloy/Nickel Plating Copper Alloy/Nickel Plating Synthetic Rubber/Black Synthetic Rubber/Black Plastic(UL94V-0)/Black Zinc Alloy/Nickel Plating Copper Alloy/Nickel Plating Synthetic Rubber/Black Synthetic Rubber/Black CRIMP TOOL ・For DeviceNet Plug and Jack Highly reliable crimp termination can be made for the straight plug and the straight jack. Two kinds of crimp tools are needed since a connector has a straight contact and angle contacts of which style are diﬀerent. However the locater can be removed and you can use one hand tool for termination if you have two locators each for the straight contact and the angle contacts. Contents Contents Item A set of crimp tool for straight contacts Hand Tool Locator Inspection Gauge 2 A set of crimp tool for angle contacts Hand Tool Locator Inspection Gauge 1 Inspection Gauge 2 Conductor Size AWG 22 - AWG 24 357J-19811 357J-12610 357J-18918 357J-19779-2 357J-19812 357J-12610 357J-17899 357J-19779-1 357J-19779-2 AWG 18 - AWG 20 357J-17917 357J-12610 357J-18918 357J-17900-2 357J-17898 357J-12610 357J-17899 357J-17900-1 357J-17900-2 Item Conductor Size AWG 18-AWG 20 357J-21598 357J-12610 357J-17899 357J-17900-2 ・For CC-Link Plug and Jack The connectors for CC-Link network will have four (4) angle contacts and the style of contact is only one. It is feasible for you to terminate the cable to the contacts by one kind of the crimp tool for angle contacts. A set of crimp tool for angle contacts Hand Tool Contents Locator Inspection Gauge 2 ◆ CONFIGURATION OF CONTACTS Straight Pin Contact Angle Pin Contact Straight Socket Contact Angle Socket Contact 30.85 29.35 25.9 24.4 ◎ Speciﬁcations and/or dimensions in this catalog are subject to change without notice. Your checking the latest speciﬁcations with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 CM02 Series Unit：mm ○ Straight Plug With Socket Contacts ・DeviceNet Plug A set of plug consists of 1 body, 1 straight contact and 4 angle contacts Applicable Cable Conductor Size Outside Dia. P/N A set of plug : CM02A-8DP5S-D(02) Body : CM02A-8DP5S-D(02)-0 Contents Straight Contact : CM02A-SSC-2224 Angle Contact : CM02A-ASC-2224 A set of plug : CM02A-8DP5S-D(04) Body : CM02A-8DP5S-D(04)-0 Contents Straight Contact : CM02A-SSC-2224 Angle Contact : CM02A-ASC-2224 A set of plug : CM02A-8DP5S-D(02)(D9) Body : CM02A-8DP5S(02)(D9)-0 Contents Straight Contact : CM02A-SSC-1820 Angle Contact : CM02A-ASC-1820 A set of plug : CM02A-8DP5S-D Body : CM02A-8DP5S-D-0 Contents Straight Contact : CM02A-SSC-1820 Angle Contact : CM02A-ASC-1820 A set of plug : CM02A-8DP5S-D(01) Body : CM02A-8DP5S-D(01)-0 Contents Straight Contact : CM02A-SSC-1820 Angle Contact : CM02A-ASC-1820 AWG22 - AWG24 φ 6.5mm - φ 7.2mm AWG22 - AWG24 φ 8.8mm - φ 9.8mm AWG18 - AWG20 φ 6.5mm - φ 7.2mm AWG18 - AWG20 φ 8.2mm - φ 8.9mm AWG18 - AWG20 φ 9.4mm - φ 9.9mm A soldering style is also available. P/N : CM02A-8DP5S-D(02)(D4) Applicable Cable : AWG16 max. conductor size φ 6.5mm - φ 7.2mm outside dia. ・CC-Link Plug A set of plug consists of 1 body and 4 angle contacts P/N A set of plug : CM02A-8DP5S-D(03) Contents Body : CM02A-8DP5S-D(03)-0 Angle Contact : CM02A-ASC-1820 Applicable Cable Conductor Size Outside Dia. AWG18 - AWG20 φ 7.2mm - φ 7.9mm 54 M12×1 Thread A φ23.6 A （Contact No.1） φ21 φ8.1 Red （Contact No.2） White （Contact No.4） Blue （Contact No.5） Black （Contact No.3） Section Ａ−Ａ ◎ Speciﬁcations and/or dimensions in this catalog are subject to change without notice. Your checking the latest speciﬁcations with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 CM02 Series Unit：mm ○ Straight Jack With Pin Contacts ・DeviceNet Jack A set of Jack consists of 1 body, 1 straight contact and 4 angle contacts Applicable Cable Conductor Size Outside Dia. P/N A set of Jack : CM02A-8DJ5P-D(02) Body : CM02A-8DJ5P-D(02)-0 Contents Straight Contact : CM02A-SPC-2224 Angle Contact : CM02A-APC-2224 A set of Jack : CM02A-8DJ5P-D(04) Body : CM02A-8DJ5P-D(04)-0 Contents Straight Contact : CM02A-SPC-2224 Angle Contact : CM02A-APC-2224 A set of Jack : CM02A-8DJ5P-D(02)(D9) Body : CM02A-8DJ5P-D(02)(D9)-0 Contents Straight Contact : CM02A-SPC-1820 Angle Contact : CM02A-APC-1820 A set of Jack : CM02A-8DJ5P-D Body : CM02A-8DJ5P-D-0 Contents Straight Contact : CM02A-SPC-1820 Angle Contact : CM02A-APC-1820 A set of Jack : CM02A-8DJ5P-D(01) Body : CM02A-8DJ5P-D(01)-0 Contents Straight Contact : CM02A-SPC-1820 Angle Contact : CM02A-SPC-1820 AWG22 - AWG24 φ 6.5mm - φ 7.2mm AWG22 - AWG24 φ 8.8mm - φ 9.8mm AWG18 - AWG20 φ 6.5mm - φ 7.2mm AWG18 - AWG20 φ 8.2mm - φ 8.9mm AWG18 - AWG20 φ 9.4mm - φ 9.9mm A soldering style is also available. P/N : CM02A-8DJ5P-D(02)(D4) Applicable Cable : AWG16 max. conductor size. φ 6.5mm - φ 7.2mm outside dia. ・CC-Link Jack A set of Jack consists of 1 body and 4 angle contacts Applicable Cable Conductor Size Outside Dia. P/N A set of plug : CM02A-8DJ5P-D(03) Contents Body : CM02A-8DJ5P-D(03)-0 Angle Contact : CM02A-APC-1820 AWG 18 - AWG 20 φ 7.2mm - φ 7.9mm M12×1 Thread 58 A A （Contact No.1） White （Contact No.4） Red （Contact No.2） Blue （Contact No.5） Black （Contact No.3） SectionＡ−Ａ ◎ Speciﬁcations and/or dimensions in this catalog are subject to change without notice. Your checking the latest speciﬁcations with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 φ23.6 φ21 CM02 Series Unit：mm ○ Ｔ Tap P/N : CM02-8D2TA5-CF 2.5 φ4.5 17 2.5 5.7 φ14 φ7.8 15 23.6 10.2 18.4 16.8 ＪＡＰＡＮ Jack （Pin） Plug （Socket） φ14 1 NC 2 NC 3 NC 4 5 1 NC 2 NC 3 NC 4 5 Plug （Socket） ○ Terminating Resistor With Pin Contacts ・Terminated between No. 4 and No. 5 with resistor, 121 ohm,1/4 watt. P/N : CM02B-8DER5P φ15 M12×1 Thread 121Ω 43 Wiring Diagram ○ Terminating Resistor With Socket Contacts ・Terminated between No. 4 and No. 5 with resistor, 121 ohm,1/4 watt. P/N：CM02B-8DER5S M12×1 Thread φ15 φ8.1 121Ω 40 Wiring Diagram ○ Receptacle with Plastic Shell and Pin Contacts, Type 1 P/N : CM02-8DR5P-CF ・P C B Contacts ・Rear-mount conﬁguration ・Applicable wire size : AWG22 max. 23 15 31.5 φ19.6 ４３２ φ1 17 M12×1 Thread M14×0.75 Thread ３ Max. (Panel Thickness) Mounting Hole ○ Receptacle with Plastic Shell and Pin Contacts, Type 2 P/N : CM02-8DR5P-CF(D5) ・P C B Contacts ・Rear-mount conﬁguration ・Applicable wire size : AWG22 max. (13) 19.4 19 .6 φ １４３２ 4 φ1 17 M12 1 Thread M14 0.75 Thread (2.7) ３ Max. (Panel Thickness) Mounting Hole ◎ Speciﬁcations and/or dimensions in this catalog are subject to change without notice. Your checking the latest speciﬁcations with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 +0.1 13.1 0 17 +0.1 0 13.1 0 13.1 １ 17 40 +0.1 +0.1 CM02 Series Unit：mm ○ Receptacle with Plastic Shell and Pin Contacts P/N : CM02-8DR5PD(D1)-FG ・P C B Contacts ・Rear-mount conﬁguration Board Thickness 1.6 ±0.2 Coding Pin φ1.4 5.9 1 6 φ14 +0.1 0 +0.1 0 １ φ8.3 12 ５ 17 ２４ 3 Max.（Panel Thickness） 5-φ１ No Printed Area 2.5 2.5 2.5 2.5 φ1.6± ３ 17 1.5 M12×1 Thread 9 23.4 3.5 M14×0.75 Thread 19.6 12.2 Panel Mounting Hole 5 φ1 4 5° Board Mounting Hole ○ Plug Receptacle with Metal Shell and Socket Contacts P/N : CM02-8DPR5S-CF ・Rear-mount conﬁguration φ20 15.8 M12×1 Thread ２３４ 4 3 2 21.9 1 φ16 19 M16×1 Thread +0.1 0 Mounting Hole ○ Plug Insert Assembly with Socket Contacts for PCB Mount P/N : CM02-8DP5SD(D1)-FG ・P C B Contacts ・No shell 3. 2 3.5 ２ 45 ° Coding Pin φ1.4 φ1.6 ±0.1 2.5 2.5 ° 45 2.5 3.2 φ3 .2 φ8.1 φ10.5 １ 5-φ１ 2.5 ５４３ 10 15 Board Mounting Hole ○ Receptacle Cap PVC Cap for Receptacle P/N：CM01-CAP Non-Waterproof type Material : PVC/Black Metal Cap for Receptacle P/N : CM01-R-CAP-CF Waterproof type Material/Finish : Copper Alloy/Nickel Plating Metal Cap for Receptacle P/N：CM01-R-CAP(D1) Waterproof type Material/Finish：Aluminum Alloy/Anodic Coatings 18 13 φ11.5 φ16 φ14 13 100 φ14 straight knurl ○ Plug Cap Metal Cap for Plug P/N : CM01-P-CAP-CF Waterproof type Material/Finish : Copper Alloy/Nickel Plating 8.7 14.3 φ14 ◎ Speciﬁcations and/or dimensions in this catalog are subject to change without notice. Your checking the latest speciﬁcations with our drawings would be highly appreciated. http://www.ddknet.co.jp 6 +0.1 15.1 0 φ13.7 ・Applicable wire size : AWG22 max. １

下载 PDF

CM02-8DP5SDD1-FG

物料型号： - CM02A-8DP5S-D(02)：适用于AWG22-AWG24导线，外径6.5mm-7.2mm。 - CM02A-8DP5S-D(04)：适用于AWG22-AWG24导线，外径8.8mm-9.8mm。 - CM02A-8DP5S-D(02)(D9)：适用于AWG18-AWG20导线，外径6.5mm-7.2mm。 - CM02A-8DP5S-D：适用于AWG18-AWG20导线，外径8.2mm-8.9mm。 - CM02A-8DP5S-D(01)：适用于AWG18-AWG20导线，外径9.4mm-9.9mm。

器件简介： CM02系列是一种Micro-style连接器，用于DeviceNet通信网络，具有IP67的防水等级，适用于在恶劣环境下连接简单的工业设备如传感器、执行器以及更高级的设备如控制器。

引脚分配： - 直型插头包含1个主体、1个直型接触件和4个角接触件。 - 直型插座包含1个主体、1个直型接触件和4个角接触件。

参数特性： - 额定电流：3A/接触件。 - 额定电压：24V DC。 - 耐压：500V AC（有效值）1分钟。 - 绝缘电阻：最小1000MΩ，在250V DC下。 - 工作温度范围：-40°C至+85°C。 - 配对时防水等级：IP67。 - 接触件数量：5。

功能详解：提供防错线颜色编码（红、白、蓝、黑），直型插头和直型插座的接触件通过压接终止，插座为焊接式。提供多种样式，包括带插座接触件的电缆安装插头、带插针接触件的电缆安装插座、T型接口、带插针接触件的面板安装插座和带插座接触件的面板安装插头接收器等。

应用信息：适用于DeviceNet通信网络，也推荐用于CCLink网络。能够在恶劣环境下使用，具有IP67等级的防护，可防止水分、油和灰尘的侵入。

封装信息： - 绝缘体：塑料(UL94V-0)/黑色。 - 接触件：铜合金/金镀层。 - 耦合环：铜合金/镍镀层。 - 背壳螺母：铝合金/黑色。 - 接触件座：塑料(UL94V-0)/黑色。 - 背壳：塑料(UL94V-0)/黑色。 - 压线螺帽：塑料(UL94V-0)/黑色。 - O型圈：合成橡胶/黑色。 - 垫圈：合成橡胶/黑色。

CM02-8DP5SDD1-FG 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“CM02-8DP5SDD1-FG”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

CM02-8DP5SDD1-FG

相关技术文章