CM02A-ASC-1820

DeviceNet Micro-Style Connectors CM02 Series Conforming Standard DeviceNet ◆ OUTLINE  The CM02 series is a Micro-style connector for Wa t e r p r o o f IP 67 use in a DeviceNet communication network. These products provide connections between simple industrial devices such as sensor, actuators and higher-level devices such as controllers. This connector system is also recommended for CCLink network and can be used in harsh environmental conditions, having IP67 rated for protection against moisture, oil and dust. ◆ FEATURES ・Crimp termination for the cable mount plugs and jacks ・Receptacle : Soldering Lock Type Threaded Coupling ・Protection from wiring errors by color-coding the contact holder with red, white, blue and black  ・Available style are cable mount plug with socket contacts, cable mount jack with pin contacts, T tap, panel mount receptacle with pin contacts, panel mount plug receptacle with socket contacts, terminating resistor and dust cap ◆ SPECIFICATIONS Rated Current   Rated Voltage Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Range Waterproof No. of Contacts 3A/contact 24V DC  500V AC(r.m.s) for 1 minute 1000M Ω min. at 250V DC - 40℃ to +85℃ IP67 when mated 5 Physical Configuration of Cables For Example Jacket ＤＣ Power Insulation Color：Black Braid Shield AL / MY Shield Data Insulation Color：White AL / MY Shield Data Insulation Color：Blue Conductor Data Insulation Colors : Blue & Yellow Ground Insulation Color : White AL / MY Shield Braid Shield Jacket Drain Wire ＤＣ Power Insulation Color：Red Drain Wire DeviceNet Thick Cable ◎ Specifications and/or dimensions in this catalog are subject to change without notice.  Your checking the latest specifications with our drawings would be highly appreciated. 090206 CC-Link Cable http://www.ddknet.co.jp RoHS MATERIAL/FINISH Item Insulator Contact Coupling Ring Backshell Nut Contact Holder Backshell Clamp Nut O-Ring Gasket Bushing Compliant Compliant Jack (With Pin Contacts) Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Copper Alloy/Gold Plating Aluminum Alloy/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Synthetic Rubber/Black Synthetic Rubber/Black Synthetic Rubber/Black for Socket Synthetic Rubber/Black Resistor (With Pin or Socket Contacts) Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Copper Alloy/Gold Plating Aluminum Alloy/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plug (With Socket Contacts) Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Copper Alloy/Nickel Plating Aluminum Alloy/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Synthetic Rubber/Black Synthetic Rubber/Black Synthetic Rubber/Black Item Insulator Contact Coupling Ring Shell Nut Washer Gasket(Mating Side) Gasket(Mounting Side) Overmolding Resin “T”Tap Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Zinc Alloy/Nickel Plating Receptacle (With Pin Contacts) Plug Receptacle (With Socket Contacts) Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Copper Alloy/Nickel Plating Copper Alloy/Nickel Plating Synthetic Rubber/Black Synthetic Rubber/Black Plastic(UL94V-0)/Black Zinc Alloy/Nickel Plating Copper Alloy/Nickel Plating Synthetic Rubber/Black Synthetic Rubber/Black CRIMP TOOL ・For DeviceNet Plug and Jack Highly reliable crimp termination can be made for the straight plug and the straight jack. Two kinds of crimp tools are needed since a connector has a straight contact and angle contacts of which style are different. However the locater can be removed and you can use one hand tool for termination if you have two locators each for the straight contact and the angle contacts. Contents Contents Item A set of crimp tool for straight contacts Hand Tool Locator Inspection Gauge 2 A set of crimp tool for angle contacts Hand Tool Locator Inspection Gauge 1 Inspection Gauge 2 Conductor Size AWG 22 - AWG 24 357J-19811 357J-12610 357J-18918 357J-19779-2 357J-19812 357J-12610 357J-17899 357J-19779-1 357J-19779-2 AWG 18 - AWG 20 357J-17917 357J-12610 357J-18918 357J-17900-2 357J-17898 357J-12610 357J-17899 357J-17900-1 357J-17900-2 Item Conductor Size AWG 18-AWG 20 357J-21598 357J-12610 357J-17899 357J-17900-2 ・For CC-Link Plug and Jack The connectors for CC-Link network will have four (4) angle contacts and the style of contact is only one. It is feasible for you to terminate the cable to the contacts by one kind of the crimp tool for angle contacts. A set of crimp tool for angle contacts Hand Tool Contents Locator Inspection Gauge 2 ◆ CONFIGURATION OF CONTACTS Straight Pin Contact Angle Pin Contact Straight Socket Contact Angle Socket Contact 30.85 29.35 25.9 24.4 ◎ Specifications and/or dimensions in this catalog are subject to change without notice.  Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 CM02 Series Unit：mm ○ Straight Plug With Socket Contacts ・DeviceNet Plug A set of plug consists of 1 body, 1 straight contact and 4 angle contacts Applicable Cable Conductor Size Outside Dia. P/N A set of plug : CM02A-8DP5S-D(02) Body : CM02A-8DP5S-D(02)-0 Contents Straight Contact : CM02A-SSC-2224 Angle Contact : CM02A-ASC-2224 A set of plug : CM02A-8DP5S-D(04) Body : CM02A-8DP5S-D(04)-0 Contents Straight Contact : CM02A-SSC-2224 Angle Contact : CM02A-ASC-2224 A set of plug : CM02A-8DP5S-D(02)(D9) Body : CM02A-8DP5S(02)(D9)-0 Contents Straight Contact : CM02A-SSC-1820 Angle Contact : CM02A-ASC-1820 A set of plug : CM02A-8DP5S-D Body : CM02A-8DP5S-D-0 Contents Straight Contact : CM02A-SSC-1820 Angle Contact : CM02A-ASC-1820 A set of plug : CM02A-8DP5S-D(01) Body : CM02A-8DP5S-D(01)-0 Contents Straight Contact : CM02A-SSC-1820 Angle Contact : CM02A-ASC-1820 AWG22 - AWG24 φ 6.5mm - φ 7.2mm AWG22 - AWG24 φ 8.8mm - φ 9.8mm AWG18 - AWG20 φ 6.5mm - φ 7.2mm AWG18 - AWG20 φ 8.2mm - φ 8.9mm AWG18 - AWG20 φ 9.4mm - φ 9.9mm A soldering style is also available. P/N : CM02A-8DP5S-D(02)(D4)   Applicable Cable : AWG16 max. conductor size φ 6.5mm - φ 7.2mm outside dia. ・CC-Link Plug A set of plug consists of 1 body and 4 angle contacts P/N A set of plug : CM02A-8DP5S-D(03) Contents Body : CM02A-8DP5S-D(03)-0 Angle Contact : CM02A-ASC-1820 Applicable Cable Conductor Size Outside Dia. AWG18 - AWG20 φ 7.2mm - φ 7.9mm 54 M12×1 Thread A φ23.6 A （Contact No.1） φ21 φ8.1 Red （Contact No.2） White （Contact No.4） Blue （Contact No.5） Black （Contact No.3） Section Ａ−Ａ ◎ Specifications and/or dimensions in this catalog are subject to change without notice.   Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 CM02 Series Unit：mm ○ Straight Jack With Pin Contacts ・DeviceNet Jack A set of Jack consists of 1 body, 1 straight contact and 4 angle contacts Applicable Cable Conductor Size Outside Dia. P/N A set of Jack : CM02A-8DJ5P-D(02) Body : CM02A-8DJ5P-D(02)-0 Contents Straight Contact : CM02A-SPC-2224 Angle Contact : CM02A-APC-2224 A set of Jack : CM02A-8DJ5P-D(04) Body : CM02A-8DJ5P-D(04)-0 Contents Straight Contact : CM02A-SPC-2224 Angle Contact : CM02A-APC-2224 A set of Jack : CM02A-8DJ5P-D(02)(D9) Body : CM02A-8DJ5P-D(02)(D9)-0 Contents Straight Contact : CM02A-SPC-1820 Angle Contact : CM02A-APC-1820 A set of Jack : CM02A-8DJ5P-D Body : CM02A-8DJ5P-D-0 Contents Straight Contact : CM02A-SPC-1820 Angle Contact : CM02A-APC-1820 A set of Jack : CM02A-8DJ5P-D(01) Body : CM02A-8DJ5P-D(01)-0 Contents Straight Contact : CM02A-SPC-1820 Angle Contact : CM02A-SPC-1820 AWG22 - AWG24 φ 6.5mm - φ 7.2mm AWG22 - AWG24 φ 8.8mm - φ 9.8mm AWG18 - AWG20 φ 6.5mm - φ 7.2mm AWG18 - AWG20 φ 8.2mm - φ 8.9mm AWG18 - AWG20 φ 9.4mm - φ 9.9mm A soldering style is also available. P/N : CM02A-8DJ5P-D(02)(D4) Applicable Cable : AWG16 max. conductor size. φ 6.5mm - φ 7.2mm outside dia. ・CC-Link Jack A set of Jack consists of 1 body and 4 angle contacts Applicable Cable Conductor Size Outside Dia. P/N A set of plug : CM02A-8DJ5P-D(03) Contents Body : CM02A-8DJ5P-D(03)-0 Angle Contact : CM02A-APC-1820 AWG 18 - AWG 20 φ 7.2mm - φ 7.9mm M12×1 Thread 58 A A （Contact No.1） White （Contact No.4） Red （Contact No.2） Blue （Contact No.5） Black （Contact No.3） SectionＡ−Ａ ◎ Specifications and/or dimensions in this catalog are subject to change without notice.   Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 φ23.6 φ21 CM02 Series Unit：mm ○ Ｔ Tap P/N : CM02-8D2TA5-CF 2.5 φ4.5 17 2.5 5.7 φ14 φ7.8 15 23.6 10.2 18.4 16.8 ＪＡＰＡＮ Jack （Pin） Plug （Socket） φ14 1 NC 2 NC 3 NC 4 5 1 NC 2 NC 3 NC 4 5 Plug （Socket） ○ Terminating Resistor With Pin Contacts ・Terminated between No. 4 and No. 5 with resistor, 121 ohm,1/4 watt. P/N : CM02B-8DER5P φ15 M12×1 Thread 121Ω 43 Wiring Diagram ○ Terminating Resistor With Socket Contacts ・Terminated between No. 4 and No. 5 with resistor, 121 ohm,1/4 watt. P/N：CM02B-8DER5S M12×1 Thread φ15 φ8.1 121Ω 40 Wiring Diagram ○ Receptacle with Plastic Shell and Pin Contacts, Type 1 P/N : CM02-8DR5P-CF ・P C B Contacts ・Rear-mount configuration ・Applicable wire size : AWG22 max. 23 15 31.5 φ19.6 ４ ３ ２ φ1 17 M12×1 Thread M14×0.75 Thread ３ Max. (Panel Thickness) Mounting Hole ○ Receptacle with Plastic Shell and Pin Contacts, Type 2 P/N : CM02-8DR5P-CF(D5) ・P C B Contacts ・Rear-mount configuration ・Applicable wire size : AWG22 max. (13) 19.4 19 .6 φ １ ４ ３ ２ 4 φ1 17 M12 1 Thread M14 0.75 Thread (2.7) ３ Max. (Panel Thickness) Mounting Hole ◎ Specifications and/or dimensions in this catalog are subject to change without notice.   Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 +0.1 13.1 0 17 +0.1 0 13.1 0 13.1 １ 17 40 +0.1 +0.1 CM02 Series Unit：mm ○ Receptacle with Plastic Shell and Pin Contacts P/N : CM02-8DR5PD(D1)-FG ・P C B Contacts ・Rear-mount configuration Board Thickness 1.6 ±0.2 Coding Pin φ1.4 5.9 1 6 φ14 +0.1 0 +0.1 0 １ φ8.3 12 ５ 17 ２ ４ 3 Max.（Panel Thickness） 5-φ１ No Printed Area 2.5 2.5 2.5 2.5 φ1.6± ３ 17 1.5 M12×1 Thread 9 23.4 3.5 M14×0.75 Thread 19.6 12.2 Panel Mounting Hole 5 φ1 4 5° Board Mounting Hole ○ Plug Receptacle with Metal Shell and Socket Contacts P/N : CM02-8DPR5S-CF ・Rear-mount configuration φ20 15.8 M12×1 Thread ２ ３ ４ 4 3 2 21.9 1 φ16 19 M16×1 Thread +0.1 0 Mounting Hole ○ Plug Insert Assembly with Socket Contacts for PCB Mount P/N : CM02-8DP5SD(D1)-FG ・P C B Contacts ・No shell 3. 2 3.5 ２ 45 ° Coding Pin φ1.4 φ1.6 ±0.1 2.5 2.5 ° 45 2.5 3.2 φ3 .2 φ8.1 φ10.5 １ 5-φ１ 2.5 ５ ４ ３ 10 15 Board Mounting Hole ○ Receptacle Cap PVC Cap for Receptacle P/N：CM01-CAP Non-Waterproof type Material : PVC/Black Metal Cap for Receptacle P/N : CM01-R-CAP-CF Waterproof type Material/Finish : Copper Alloy/Nickel Plating Metal Cap for Receptacle P/N：CM01-R-CAP(D1) Waterproof type Material/Finish：Aluminum Alloy/Anodic Coatings 18 13 φ11.5 φ16 φ14 13 100 φ14 straight knurl ○ Plug Cap Metal Cap for Plug P/N : CM01-P-CAP-CF Waterproof type Material/Finish : Copper Alloy/Nickel Plating 8.7 14.3 φ14 ◎ Specifications and/or dimensions in this catalog are subject to change without notice.   Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 6 +0.1 15.1 0 φ13.7 ・Applicable wire size : AWG22 max. １