CM03-J5P

DeviceNet Mini-Style Connectors CM03 Series ◆ OUTLINE  The CM03 series is the connector designed in accordance with DeviceNet Mini Style, an official standard of ODVA (Open DeviceNet Vendor Association, Inc.) for use in a DeviceNet communication network. The DeviceNet communication network provides connection among not only simple industrial devices such as sensor, actuator, electrical and electronic devices but also higher-level of devices such as control equipment. The CM03 series is IP67 rated for protection against moisture, oil and dust. It can be used in harsh environmental conditions. The connectors are provided with a premating contact which is a first make-last break contact to protect the circuit. When mated, the premating contact is connected first before the other contacts are disconnected last when dismated. Conforming Standard DeviceNet Wa t e r p r o o f IP 67 ◆ FEATURES ・ C-UL certified ・Protection from wiring errors by color-coding the contact holder with red, white, blue and black ・ Miswiring prevention : "Red, black, white and blue" are shown to a contact holder. Lock Type Threaded Coupling  No indication for drain wire. [Applicable P/N : CM03-P5S, CM03-J5P] ◆ SPECIFICATIONS Rated Current Rated Voltage Dielectric Withstanding Voltage  Insulation Resistance Operating Temperature Range Waterproof No. of Contacts 8A/Contact 24V DC 500V AC(r.m.s.) for 1 minute 1,000 ΜΩ Min. at 250V DC - 40℃ to +85℃ IP67 when mated 4 and 5 Jacket ＤＣ Power Insulation Color：Black Braid Shield AL / MY Shield Data Insulation Color：White AL / MY Shield Data Insulation Color：Blue Drain Wire ＤＣ Power Insulation Color：Red Applicable Cable RoHS Compliant ◆ MATERIAL/FINISH Compliant Item Front Insulator Rear Insulator Gasket Coupling Ring Contact Retainer Ring O-Ring Contact Holder Back Shell Cable Holder Bushing Clamp Nut  ・Conductor size : AWG14 to AWG18  ・Outside Dia. : φ 7mm to φ 12mm Plug (With Socket Contacts) Synthetic Rubber/Black Plastic(UL94V-0)/Black Synthetic Rubber/Black Zinc Alloy/Nickel Plating Copper Alloy/Gold Plating Copper Alloy/Nickel Plating Synthetic Rubber/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/White Synthetic Rubber/Black Plastic(UL94V-0)/Black Jack (With Pin Contacts) Synthetic Rubber/Black Plastic(UL94V-0)/Black  Item Insulator Gasket(Mating Side) Contact Receptacle (With Pin Contacts) Plug Receptacle (With Socket Contacts) Synthetic Rubber/Black Synthetic Rubber/Black Synthetic Rubber/Black Copper Alloy/Gold Plating Zinc Alloy/Nickel Plating Copper Alloy/Nickel Plating Synthetic Rubber/Black Copper Alloy/Gold Plating Zinc Alloy/Nickel Plating Zinc Alloy/Nickel Plating Synthetic Rubber/Black Zinc Alloy/Nickel Plating Copper Alloy/Gold Plating Copper Alloy/Nickel Plating Synthetic Rubber/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/White Synthetic Rubber/Black Plastic(UL94V-0)/Black Shell Nut Gasket(Mounting Side) ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. 090213 http://www.ddknet.co.jp CM03 Series Unit：mm ○ Configuratin of Connectors for Crimp Contacts Plug (With Socket Contacts) ・4 pieces or 5 pieces of unassembled socket contacts to be supplied together with connectors ・Crimp termination type. （75） ３ ２ (4 positions for power) 7 8-16UN-2A φ26 P/N : CM03-P4S ４ １ Applicable Outside Dia of Cable （φ7∼φ12） φ26.4 φ25 φ14.2 24 (Flat surfaces for spanner wrench) （75） ５１ ４２ ３ 7 8-16UN-2A φ26 (5 positions for signal) Applicable Outside Dia of Cable （φ7∼φ12） P/N : CM03-P5S φ26.4 φ25 φ14.2 24 (Flat surfaces for spanner wrench) Jack (With Pin Contacts) ・4 pieces or 5 pieces of unassembled socket contacts to be supplied together with connectors ・Crimp termination type. (78) ４ ３ ２ (4 positions for power) 7 8-16UN-2A φ26 P/N : CM03-J4P １ Applicable Outside Dia of Cable （φ7∼φ12） φ26.4 φ25 φ14.3 24 (Flat surfaces for spanner wrench) 7 8-16UN-2A φ26.4 φ25 φ14.3 (78) Applicable Outside （φ7∼φ12） Dia of Cable P/N : CM03-J5P (5 positions for signal) １５ ２４ ３ φ26 24 (Flat surfaces for spanner wrench) ◆ CONFIGURATION OF CRIMP CONTACTS Pin Contacts P/N : CM03-J-PC 28.5 Socket Contacts P/N : CM03-P-SC 26.45 ◆ CRIMP TOOL ・A crimp tool should is be needed for plugs and jacks. Item     A Set of Crimp Tool Hand Tool  Contents Locator Inspection Gauge for AWG18 Inspection Gauge for AWG14 P/N  3 5 7 J- 2 2 48 3  3 5 7 J- 1 2 6 1 0 3 5 7 J- 2 2 48 4 3 5 7 J- 2 2 2 7 6 - 1 3 5 7 J- 2 2 2 7 6 - 2 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 CM03 Series Unit：mm ○ Receptacle With Pin Contacts Soldering Type P/N : CM03-R5P-S-CF 7 8 -16UN-2A No.1 No.5 No.1 9 Filled with Epoxy Resin φ20.6 No.5 φ27 No.4 No.2 No.3 13/16-20UNEF-2A 7 8.7 4 1.5 4.8 28 11 No.2 No.3 24 No.4 Mounting Hole ○ Plug Receptacle With Socket Contacts Soldering Type P/N : CM03-PR5S-S-CF 19.5 φ2 0.8 +0.1 0 0 Note: The position numbers are just for your reference and not shown on the connectors. No.1 No.5 9 Filled with Epoxy Resin No.1 No.5 φ24 φ20.6 No.2 No.4 No.3 13/16-20UNEF-2A 7.6 7.3 11.2 32 7 8 -16UN-2B No.4 24 No.2 No.3 3.5 Note: The position numbers are just for your reference and not shown on the connectors. φ2 0.8 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 19.5 +0.1 0 0 3 φ27