CM10-AP2S-L

One-Touch Locking Style Small Sized Circular Connectors CM10 Series (D6) Type ◆ OUTLINE CM10 series (D6) type is a small sized waterproof circular connector with push on locking and turnoff unlocking mechanism. The plug will be easily locked with the receptacle when you push on. Rotating the coupling ring, the plug will be unlocked when you need to unmate. The plug can not be unmated from the receptacle by such an unexpected force like the cable being pulled. CM10 with (D6) has a solid construction with the metal shell. The weight of the connector is lighter with the light metal backshell and the resin clamp nut than the CM10 series connectors which we had released earlier. CM10 series Wa t e r p r o o f IP 67 with (D6) can be used with a wide range of applications since it is small size and waterproof connector. ◆ FEATURES 1. Solid structure with a metal shell ◆ SPECIFICATIONS Item Rated Current Rated Voltage Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Range Conductor Size Protection Rate 2 Contacts 10 Contacts 3A Max. ／ Contact 200V AC(r.m.s.) Max. Lock Type Push-On 2. One touch and reliable locking mechanism of push on and turnoff 3. With a grounding contact (Position 10) 4. Angle plug available for low-profile mounting 5. Lighter in weight by 30% than CM10 without (D6) 1500V AC(r.m.s.) ／ 1 minute 900V AC(r.m.s.) ／ 1 minute 1,000M Ω Min. at 500V DC -25℃ to +85℃ ＃ 22 IP67 when mated (Receptacle : Individually waterproof) Receptacle, Cable Receptacle Receptacle, Cable Receptacle Plug ・Crimp：20AWG-28AWG ・Soldering only, 20AWG max. ・Soldering Use,：20AWG Max Applicable Wire Plug ・Crimp：16AWG-20AWG RoHS ◆ MATERIAL/FINISH Item Pin Front Insulator Pin Rear Insulator Pin Contact O Ring(Mounting Side) Receptacle Shell Retaining Ring Ground Lug ・Soldering Use,：16AWG Max. ・Soldering Use,：20AWG Max. Compliant Compliant Receptacle Item Socket Cover Insulator Socket Insulator Fixed Pin Socket Contact Coupling Ring O Ring(Mating Side) Plug Shell Spring Plug Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Copper Alloy/Nickel Plating Copper Alloy/Gold Plating Zinc Alloy/Nickel Plating Synthetic Rubber/Black Zinc Alloy/Nickel Plating Stainless Steel Aluminum Alloy/Nickel Plating Synthetic Rubber/Black Plastic(UL94V-0)/White Plastic(UL94V-0)/Black Stainless Steel Synthetic Rubber/Black Plastic(UL94V-0)/Black Copper Alloy/Gold Plating Synthetic Rubber/Black Zinc Alloy/Nickel Plating Copper Alloy/Gold Plating Copper Alloy/Gold Plating Item Pin Front Insulator Pin Rear Insulator Screw Pin Contact Receptacle Shell Backshell Bushing Cable Clamp Clamp Nut Ground Lug Cable Receptacle Synthetic Rubber/Black Plastic(UL94V-0)/Black Stainless Steel Copper Alloy/Gold Plating Zinc Alloy/Nickel Plating Zinc Alloy/Nickel Plating Synthetic Rubber/Black Plastic(UL94V-0)/White Zinc Alloy/Nickel Plating Copper Alloy/Gold Plating Backshell Bushing Cable Clamp Clamp Nut Retaining Ring 090804 ◎ Specifications and/or dimensions in this catalog are subject to change without notice.   Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp CM10 Series Unit：mm ○ 10-Contact Plug ・Contact Style : Socket ・Termination：Solder or Crimp ・The contact is sold separately. Straight Plug Right Angle Plug φ21 φ21 (51.4) 34 (32.5) Straight Plug P/N CM10-SP10S-S(D6) CM10-SP10S-M(D6) CM10-SP10S-L(D6) Right Angle Plug P/N CM10-AP10S-S(D6) CM10-AP10S-M(D6) CM10-AP10S-L(D6) Cable Outside Dia. φ 4.0 ∼φ 6.0 φ 6.0 ∼φ 9.0 φ 9.0 ∼φ 11.6 Note: The applicable cable outside diameter is in the case of cabtyre cable. Please contact the nearest sales office when you use a different cable. Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue. ○ Contact of 10-Contact Plug Loose Piece Contact Item Crimping Type Soldering Type   Contact P/N (100 pcs in 1 bag ) CM10-#22SC(C1)(D8)-100 CM10-#22SC(C2)(D8)-100 CM10-#22SC(S1)(D8)-100 Applicable Wire Conductor Size 20 ∼ 22AWG 23 ∼ 28AWG 20 AWG Max. Insulation Dia. φ 1.10 ∼φ 1.87 φ 0.80 ∼φ 1.50  Hand Tool P/N 357J-50446T 357J-50447T 357J-50548T Extraction Tool P/N 1. The packaging specification is 100 pcs of contacts per bag for sale.  ２．Both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to the cable or crimping the contacts with the cable. The semi-automatic crimping machine is required when you terminate the reel contacts. Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only) Contact P/N ( 5,000 pcs on 1 reel ) CM10-#22SC(C1)(D8)-5000 CM10-#22SC(C2)(D8)-5000 Applicable Wire Conductor Size 20 ∼ 22AWG 23 ∼ 28AWG Insulation Dia. φ 1.10 ∼φ 1.87 φ 0.80 ∼φ 1.50 1set P/N Semi-Automatic Crimping Machine Applicator P/N (φ21) Extraction Tool P/N 357J-50548T AP-A50539T AP-A50540T AP-A50539T-1 AP-A50540T-1  1. Both of AP50539T and AP50540T are the set part numbers which include both of the semi-automatic crimping machines and the applicators (stripper crimpers).  2. Each of AP50539T and AP50540T contains exactly the same semi-automatic machine. Therefore if you change the applicator, you can terminate both of CM10-#22SC(C1)(D8)-5000 and CM10-#22SC(C2)(D8)-5000 by one semi-automatic crimping machine. CM10-#22SC(C1)(D8)- □□□□ CM10-#22SC(C2)(D8)- □□□□ CM10-#22SC(S1)(D8)- □□□□ 15.6 6 2.65 2.45 6 15.6 6 15.6 ◎ Specifications and/or dimensions in this catalog are subject to change without notice.   Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 1.65 CM10 Series Unit：mm ○ 2-Contact Plug ・Contact Style : Socket ・Termination：Solder or Crimp ・The contact is sold separately. Straight Plug Right Angle Plug (φ21) １ ２ φ21 φ21 １ ２ (51.4) 34 (32.5) Straight Plug P/N CM10-SP2S-S(D6) CM10-SP2S-M(D6) CM10-SP2S-L(D6) Right Angle Plug P/N CM10-AP2S-S(D6) CM10-AP2S-M(D6) CM10-AP2S-L(D6) Cable Outside Dia. φ 4.0 ∼φ 6.0 φ 6.0 ∼φ 9.0 φ 9.0 ∼φ 11.6 Note: The applicable cable outside diameter is in the case of cabtyre cable. Please contact the nearest sales office when you use a different cable. Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue. ○ Contact of 2-Contact Plug Loose Piece Contact Item Crimping Type Soldering Type     Contact P/N   Applicable Wire Insulation Dia. φ 1.87 ∼φ 2.45 ( 100 pcs in 1 bag ) CM10-#22SC(C3)(D8)-100 CM10-#22SC(S2)(D8)-100 Conductor Size 16 ∼ 20AWG 16AWG Max. Hand Tool P/N 357J-50448T Extraction Tool P/N 357J-50548T 1. The packaging specification is 100 pcs of contacts per bag for sale. ２．Both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to the cable or crimping the contacts with the cable. Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only)   Contact P/N The semi-automatic crimping machine is required when you terminate the reel contacts. Applicable Wire Conductor Size 16 ∼ 20AWG Semi-Automatic Crimping Machine 1set P/N AP-A50541T Applicator P/N AP-A50541T-1 Extraction Tool P/N 357J-50548T ( 4,000 pcs on 1 reel ) CM10-#22SC(C3)(D8)-4000 Insulation Dia. φ 1.87 ∼φ 2.45 1. Due to the construction of CM10-#22SC-(C3)(D8)-4000 you can only make the crimping process by AP50541T. So the process of striping cable shall be made in advance.   2. AP50541T is a set part number which includes both of the semi-automatic crimping machine and the applicator (crimper). CM10-#22SC(C3)(D8)- □□□□ CM10-#22SC(S2)(D8)- □□□□ 15.6 6 15.6 6 ◎ Specifications and/or dimensions in this catalog are subject to change without notice.   Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 φ2.1 4 CM10 Series Unit：mm ○ Straight Cable Receptacle ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. ・ Insulation Dia. : φ 1.87 Max. ・Contact No.10 grounded to shell with ground lug 10 Pins P/N CM10-CR10P-S CM10-CR10P-M CM10-CR10P-L Cable Outside Dia. φ 4.0 ∼φ 6.0 φ 6.0 ∼φ 9.0 φ 9.0 ∼φ 11.6 21.0 ３ １ ４ 18.9 ７ １０ ８ （51.3） 2 Pins P/N CM10-CR2P-S CM10-CR2P-M CM10-CR2P-L Cable Outside Dia. φ 4.0 ∼φ 6.0 φ 6.0 ∼φ 9.0 φ 9.0 ∼φ 11.6 ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. 21.0 （51.3） Note: The applicable cable outside diameter is in the case of cabtyre cable. Please contact the nearest sales office when you use a different cable. ○ Receptacle 10 Pins P/N CM10-R10P(D3)-01 2 Pins P/N CM10-R2P(D3)-01 ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. ・Individually waterproof Contact No.10 grounded to shell with ground lug (7.9) 5.2 Main key positon mark ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. ・Individually waterproof 18.9 (7.9) 5.2 Main key positon mark φ15.3 4 7 7 4 8 10 10 8 φ15.3 φ12 1 3 3 1 1 1 φ12 2 2 DDK 1.7 □17.26 4-φ3.2 □23.4 8.4 (13.6) 4-φ3.2 □17.26 □23.4 1.7 8.4 (13.6) DDK φ12 +0.1 +0.2 φ16.2 +0.25 0 (  ) □17.26 0.1 4-M3 1-0.1 3 min. 0 Mounting Dimensions ◎ Specifications and/or dimensions in this catalog are subject to change without notice.   Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 CM10 Series Unit：mm ○ Mated Dimensions Receptacle ＋ Straight Plug Receptacle ＋ Right Angle Plug (44.3) φ21 (52) 23.4 ○ Dust Cap for Receptacle & Cable Receptacle P/N CM10-R-DC 7 φ16.3 φ14.8 Material : Plastic Color : Red φ20.7 DDK 2 7.9 ○ Supporting Cover  Straight Plug P/N CM10-SP-CV  Right Angle Plug P/N CM10-AP-D-CV (53) (33.5) 23.4 φ21 32 22.8 30 45 40 (27) ◎ Specifications and/or dimensions in this catalog are subject to change without notice.   Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 35.6