FF19CE-18B-R11BP

0.4 mm Pitch Back-Lock FPC Connector FF19CE Series 【CE-ATA 8Bit Standard】 OUTLINE ・FF19CE series is a FPC connector which is 0.4mm pitch,1.25mm height and 4.21mm depth. ・It is interface connector for smaller than 1.8" HDD. FEATURE ・ Conforming to CE-ATA 8bit standard (HDD side) ・Front-acccess back lock design is short depth and suitable to compact device. ・Cable lock mechanism retains FPC. ・Mid-mounting design which is mounted across the PCB enables to operate the lock lever  from reverse side. ・Connectors deliver with the lock lever opened. Time saving for FPC inserting operation. ・ Both upper and lower contacts design accepts any FPC inserting directions. ・ Back lock mechanism enables to retain FPC against pulling upward direction. ・The lock lever does not fall down to the opposite side. ・ Board lock pins prevent the mounting gap. ・Nickel barrier prevents solder wicking. SPECIFICATIONS Rated Voltage Rated Current Insulation Resistance Contact Resistance 50V AC(r.m.s.) 0.5A / Contact 100 M Ω min. at 500V DC 50m Ω max. APPLICATIONS Portable HDD Dielectric Withstanding Voltage 200V AC(r.m.s.) / 1 minute MATERIAL/FINISH Item Contact Housing Lock Lever RoHS Compliant Compliant Material / Finish Copper Alloy /Au(Flash) over Ni Plating LCP Resin (UL94V-0) / Ivory PPS Resin (UL94V-0) / Black 090803 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp FF19CE Series Unit：mm ○ CE-ATA 8Bit Standard Part Number FF19CE-1 8B-R11BP ① ② ③ ④⑤⑥⑦⑧ ① Series ② Number of Contact ③ Contact Posision ④ Contact Style ⑤ Mounting Type ⑥ Contact Plating ⑦ Lock Lever Type FF19CE 18 : 18 Contacts B：Upper and Lower Contact R：Right Angle 1： Mid Mount Type 1：Au(Flash) over Ni Plating B：with Cable Lock P： with Board Lock 15.90 0.10 14.90 0.05 6.80 0.10 0.40 0.07 0.15 0.03 ⑧ Board Lock 0.55 0.10 0.70 0.05 1.20 0.10 0.90 0.05 15.70 0.15 2.00 0.05 0.55 0.05 11.64 0.15 10.83 0.05 （2.71） 0.40 0.10 0.40 0.10 X 0.35 0.05 0.15 0.03 3.40 4.20 10.10 0.03 0.10 X 3.40 4.20 0.70 0.05 1.25 0.10 4.21 0.15 0.70 0.05 14.90 0.10 12.20 0.10 A 0.40 6.80 0.23 0.03 0.04 A X 3.10 0.10 1.00 0.10 0.55 0.05 4.10 0.10 0.0 5 0.80 0.10 1.00 0.10 2φ 0.7 2.00 0.05 3.10 0.10 10.97 0.15 （3.00） No.1 Contact No.18 Contact 3.95 1.60 0.10 3.95 14.70 2- R0 Recommended PCB Dimensions 05 4R 0. 0.0 0.50以上 .5 5 0.10 A 20 Supporting Tape 0.80 4- R 0. 0.40 0.20 0.27 0.03 3.40 4.20 Pin1 0.06 X 3.40 4.20 10.05 0.05 X Y 1.40 0.30 0. 05 2- R0 .20 0.0 5 20 0. 0.20 0.03 0.70 0.05 0.10 Y 0.70 0.05 0.10 X Recommended FPC Dimensions ・ Recommended FPC Plating ： over Ni Plating Au ・ Recommended Adhesive ： Heat Curing Adhesive ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 FF19CE Series Unit：mm ○ Package Specifications ■ Reel Dimensions 3.0 0.2 32.4 TYP. φ380 φ80 User direction of feed 400mm min. Tailer 90 Pockets min. ： Empty component pockets sealed with cover tape. 2000 Pockets Leader 10 Pockets ： Empty component pockets sealed with cover tape. User direction to feed ■ Emboss Tape Dimensions 14.20 0.10 2.00 0.10 E D 4.00 1.35 1.75 28.40 14.00 12.00 16.20 B C Section D-D Section E-E D E 12.00 C B 2.70 Section B-B 1.45 TYP. 1.19 TYP. 3.60 TYP. ■ Quantity：2000pcs./reel, 10 reels/Carton Section C-C ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.  Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 2.10 TYP. 24.00 32.00 25.5