FRCE-50H1

FRCE Series Metal Hood FRC5 Series Shielded Type for EMI Suppression The FRCE series hood is used for the FRC5 series socket connectors. It is made of aluminum alloy. It provides complete EMI protection to the connectors. ●Applicable connectors : No. of contacts 26, 34, 50 FRC5-A □26- □TON, FRC5-A □34- □TON, FRC5-A□50-□T□N ●The mating connector of the FRCE series socket with hood is a header without a lock. FRC5-C26 □ □□T-ON, FRC5-C34□ □□TON, FRC5-C50□□□T-□N Ｄ FRCE MATERIAL/FINISH Hood Lock screws Cable clamp Clamp clip Aluminum cast/Non-conductive paint finish (color : gray) Steel/Nickel plating Steel/Nickel plating Steel/Nickel plating ●　 ● 1 FRCE Series Unit : mm D A H (Boot ID) C Ｄ 7.85 FRCE Attached to Socket Connector 9.4 M3 × 0.5 Thread Attached to Panel B 12.4 P/N FRCE-26H1 FRCE-34H1 FRCE-50H1 A 57.6 67.76 88.08 B 37.59 47.75 68.07 C 35 35 40 D 10×13 10×15 10×18 E 38.60 48.76 69.08 F 47.60 57.76 78.08 G 30.48 40.64 60.96 H 10.5 11.0 13.0 Panel and PCB Mounting Dimensions Panel M3 × 0.5 Thread R1.5 max. 10.4 +0 -0.4 PCB φ0.8 M3 × 0.5 Thread R1.5 max. 10.4 +0 -0.4 Connector Panel PCB G 13 max +0.5 (22.8 -0 ) 2.54 E F E F 2.54 26.5 -0 +0.5 Right angle header Straight header 2 ● 　●