SSMB75-LR-PC-3

SSMB75 Series 75Ω SSMB Type Connectors ●SSMB75 series are connectors for 75 Ω group of SSMB series (50Ω group). ●DDK’s originally developed 75Ω group connec- tors are super mini-size push-on type. ●Strong against distortion by application of closed entry structure. ●Receptacles (L type for print base) are available, i.e., 1-5 rows. ●Not intermateable with SSMB series. ●Widely used for test instruments, broadcasting equipment, CATV and HDTV, etc. SPECIFICATION Characteristic Impedance Dielectric withstanding voltage Insulation resistance Contact resistance VSWR 75Ω 500V AC (rms) for 1 minute 1000MΩmin. at 500V DC 10mΩ max. 1.3max. at 1GHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Shell (Body) Contact (male) Contact (female) Insulators Copper alloy/Gold plating Copper alloy/Gold plating Copper alloy/Gold plating PTFE The performance may differ depending on the specification. ● 　● 1 SSMB75 Series Unit : mm ■ Plug 　 φ5.5 φ3.5 P/N SSMB75-SP-1.5CCA-EXBV （16.55） 9 Applicable Cable 1.5CCA-EXBV Hand Crimp Tool P/N CR-H-1101 □6 φ5 P/N SSMB75-LP-1.5CW-CR1 Applicable Cable 1.5C-QEW 1.5C-2W Hand Crimp Tool P/N 14 φ4.7 ■ Receptacle 　 4- □ 0.6 P/N SSMB75-SR-PC Mounting Hole V 6.0 5.7 8.5 (12.8) 6.4 3.55 2.5 φ2.65 7.62 A C 8.2 5.7 0.6 φ0.65 5.7 0.6 2.54 D B E 2.54 P/N SSMB75-LR-PC SSMB75-LR-PC-2 SSMB75-LR-PC-3 SSMB75-LR-PC-4 SSMB75-LR-PC-5 A 5.70 13.30 20.92 28.54 36.16 B 5.08 12.70 20.32 27.94 35.56 C 7.62 15.24 22.86 30.48 D 12.70 15.24 E 15.24 20.32 Mounting Hole V W X Y Z ●　 ● 2 SSMB75 Series Unit : mm P CB Mounting Dimensions 　 　 　 　 　 　 　 　 Mounting Hole V 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 5-φ1.2 -0 +0.1 Mounting Hole W 6-φ1.2 +0.2 -0 2.54 ± 0.05 2.54 ± 0.05 7.62 ± 0.05 (12.7) 2.54 ± 0.05 10-φ1.2 +0.1 -0 5.08 ± 0.1 2.54 ± 0.05 5.08 ± 0.1 2.54 ± 0.05 11-φ1.2 +0.1 -0 5.08 ± 0.1 2.54 ± 0.05 2.54 ± 0.05 (35.56) 5.08 ± 0.1 2.54 ± 0.05 5.08 ± 0.1 2.54 ± 0.05 5.08 ± 0.1 2.54 ± 0.05 　 　 　 　 　 　 　 　 　 　 　 Mounting Hole X 7-φ1.2 +0.1 -0 2.54 ± 0.05 7.62 ± 0.05 7.62 ± 0.05 (20.32) 　 　 　 　 　 　 　 　 　 　 　 　 　 　 Mounting Hole Y 12.7 ± 0.15 2.54 ± 0.05 7.62 ± 0.05 7.62 ± 0.05 7.62 ± 0.05 (27.94) 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 Mounting Hole Z 15.24 ± 0.15 2.54 ± 0.05 7.62 ± 0.05 7.62 ± 0.05 7.62 ± 0.05 7.62 ± 0.05 Pull-out Tool P/N:18M-SSMB75-11897 (Applicable SSMB75-LP-1.5CCA-EXBV) ● 　● 3 2.54 ± 0.05