03KEEG3SA

HIGH PERFORMANCE IEC CONNECTOR SERIES FILTERS SPECIFICATIONS INTRODUCTIONS 1. Specially designed with ground choke providing most effective EMI suppression for high frequency noise (ranged 5MHz-25MHz). 2. Bleeder resistor can be added with suffix "-R" on part numbers. 3. With optional Y capacitor 100pF to 3300pF. 4. All part numbers are UL recognized, CSA certified and VDE approved. PART NO. L (mH) Cx (uF) Cy (pF) Lg (uH) 03KEEG3EA/03KEEW3EA 3.1 0.8 * 08KEEG3EA/08KEEW3EA 0.4 0.1 2200 100 ** 10KEEG3EA/10KEEW3EA 3.1 *** 03KEEG3SA/03KEEW3SA 0.8 *** 06KEEG3SA/06KEEW3SA 0.4 *** 10KEEG3SA/10KEEW3SA * VDE approved to 6A 250V. ** UL, CSA & VDE approved to 9A 115/250VAC. *** SEMKO approved , UL& cUL under approve. 2.051 52.1 0.13 (2X) 3.3 (2X) N G 1.575 0.005 40.0 0.13 1.99MAX. 50.5MAX. 45 50 50 40 40 45 +0.02 1.12-0 +0.5 28.45-0 1.575 0.005 40.0 0.13 1.87 0.04 47.5 1.0 2.02 0.04 51.5 1.0 1.18 0.02 30.0 0.5 1.12MAX. 28.4MAX. L Cy M3 +0.02 1.120 +0.5 28.450 N ALL WIRE LEADS 4.0" LONG MIN. W3EA 1.99MAX. 50.5MAX. N' 0.13 0.008 3.3 0.2 G' G 1.575 0.02 40.01 0.5 L R: 1M /-R ONLY 0.87 0.02 22.2 0.5 Lg N G MECHANICAL CONSTRUCTION 1.12MAX. 28.4MAX. +0.02 1.12-0 +0.5 28.45-0 1.575 0.005 40.0 0.13 2.16 0.04 55.5 1.0 1.79 45.5 2.34 59.5 1.18 0.02 30.0 0.5 G3EA +0 - 0 R3.03. +0 - 2 R0.120.1 SUGGESTED MOUNTING CUTOUT 4.0MIN. 100.0MIN. L O A D 21.3MAX. 0.84MAX. N G 22.2 0.5 L 0.87 0.02 1.575 0.02 40.0 0.5 0.13 0.008 3.3 0.2 21.3MAX. Cx +0.02 0.850-0 G3SA 0.84MAX. R R0.118(4X) R3.0(4X) SUGGESTED MOUNTING CUTOUT (MOUNTING FROM FRONT) 30 45 50 50 40 40 45 L' Cy M3(2X) +0.5 21.6-0 2.126 MAX. 54.0 MAX. 1.520 38.6 1.118 MAX. 28.4 MAX. 1.970 MAX. 50.0 MAX. +0.02 1.120 +0.5 28.450 ELECTRICAL SCHEMATIC L 21.3 MAX. L 0.839 MAX. 1.575 0.020 40.0 0.5 MINIMUM INSERTION LOSS IN dB COMMON MODE (L-G) IN 50 OHM SYSTEM FREQUENCY-MHz PART NO. .15 .50 1.0 5.0 10 03KEEG3EA/03KEEW3EA 15 20 25 40 40 08KEEG3EA/08KEEW3EA 10 15 20 35 40 10KEEG3EA/10KEEW3EA 7 12 18 30 30 03KEEG3SA/03KEEW3SA 15 20 25 40 40 06KEEG3SA/06KEEW3SA 7 15 20 35 40 10KEEG3SA/10KEEW3SA 4 12 18 30 30 DIFFERENTIAL MODE (L-L) IN 50 OHM SYSTEM 03KEEG3EA/03KEEW3EA 5 12 15 40 50 08KEEG3EA/08KEEW3EA 5 10 15 45 40 10KEEG3EA/10KEEW3EA 4 12 18 30 30 03KEEG3SA/03KEEW3SA 10 20 35 40 45 06KEEG3SA/06KEEW3SA 10 25 40 35 40 10KEEG3SA/10KEEW3SA 10 25 35 30 30 IEC INLET FILTERS 1. Maximum leakage current each line-to-ground @ 115VAC 60Hz: 0.20mA @ 250VAC 50Hz: 0.40mA 2. Hipot rating (one minute) line-to-ground: 2250VDC line-to-line: 1450VDC 3. Operating frequency: 50/60Hz 4. Rated voltage: 115/250VAC COMPONENTS L I N E V D E M3 +0.02 1.120 +0.5 28.450 +0 R3.03.0 +0 R0.120.12 SUGGESTED MOUNTING CUTOUT W3EA G3EA 2-11 UNIT: INCH mm HIGH PERFORMANCE SNAP-IN FILTERS SERIES SPECIFICATIONS 1.66MAX. 42.16MAX. MINIMUM INSERTION LOSS IN dB 40 35 30 45 40 30 N L G 1.22 0.02 31.5 0.5 1.12MAX. 28.4MAX. 0.84MAX. 21.4MAX. +0.012 1.120 +0.3 28.450 ELECTRICAL SCHEMATIC L I N E Cy R Cx L Cy L O A D 0.0315~0.063 0.8~1.6 ALL WIRE LEADS 4.0" LONG MIN. W3EA N' N R0.08MAX. R2.0MAX. SUGGESTED MOUNTING CUTOUT 4.0MIN. 100.0MIN. L' L 21.90 0.1 35 40 35 Suggested thickness of mounting panel is from 0.0315 (0.8) to 0.063 (1.6) inch(mm) of mounting cutout 0.862 0.004 20 25 25 G3SA 0.84 MAX. 21.3 MAX. 40 40 45 10 10 10 0.0315~0.063 0.8~1.6 SUGGESTED MOUNTING CUTOUT 1.12MAX. 28.4MAX. 0.945 0.02 03KENG3SA/03KENW3SA 06KENG3SA/06KENW3SA 10KENG3SA/10KENW3SA R0.08MAX. R2.0MAX. +0.04 0.14-0.02 +1.0 3.6-0.5 45 50 50 30 45 50 50 40 40 45 +0.012 1.120 +0.3 28.450 1.89MAX. 48.0MAX. 1.97 0.04 50.0 1.0 COMMON MODE (L-G) IN 50 OHM SYSTEM FREQUENCY-MHz PART NO. .15 .50 1.0 5.0 10 03KENG3EA/03KENW3EA 15 20 25 40 40 08KENG3EA/08KENW3EA 10 15 20 35 40 10KENG3EA/10KENW3EA 7 12 18 30 30 03KENG3SA/03KENW3SA 15 20 25 40 40 06KENG3SA/06KENW3SA 7 15 20 35 40 10KENG3SA/10KENW3SA 4 12 18 30 30 DIFFERENTIAL MODE (L-L) IN 50 OHM SYSTEM 03KENG3EA/03KENW3EA 5 12 15 40 50 08KENG3EA/08KENW3EA 5 10 15 45 40 10KENG3EA/10KENW3EA 4 12 18 30 30 21.90 0.1 +0.04 0.14-0.02 +1.0 3.6-0.5 1.22 0.02 31.5 0.5 * VDE approved to 6A 250V. ** UL, CSA & VDE approved to 9A 115/250 VAC. *** SEMKO approved , UL & cUL under approve. 0.862 0.004 N G 24.0 0.5 L 2.1MAX. 53.4MAX. L (mH) Cx (uF) Cy (pF) Lg (uH) 3.1 0.8 0.4 0.1 2200 100 3.1 0.8 0.4 24.0 0.5 COMPONENTS 0.945 0.02 1. Maximum leakage current each line-to-ground @ 115VAC 60Hz: 0.20mA @ 250VAC 50Hz: 0.40mA 2. Hipot rating (one minute) line-to-ground: 2250VDC line-to-line: 1450VDC 3. Operating frequency: 50/60Hz 4. Rated voltage: 115/250VAC G' G 1.89MAX. 48.0MAX. +0.04 0.14-0.02 +1.0 3.6-0.5 1.22 0.02 31.5 0.5 G3EA 21.3MAX. MECHANICAL CONSTRUCTION +0.012 1.120 +0.3 28.450 W3EA 21.90 0.1 N G 0.862 0.004 L 24.0 0.5 R: 1M /-R ONLY 0.945 0.02 Lg 1.97 0.04 50.0 1.0 IEC INLET FILTERS INTRODUCTIONS 1. Specially designed with ground choke providing most effective EMI suppression for high frequency noise (ranged 5MHz-25MHz). 2. Bleeder resistor can be added with suffix "-R" on part numbers. 3. With optional Y capacitor from 100pF to 3300pF. 4. All part numbers are UL recognized, CSA certified and VDE approved. 5.Optional side snap-in mounting clip type with suffix (H) on part numbers. for 03/06/10KENG3SA series. PART NO. 03KENG3EA/03KENW3EA * 08KENG3EA/08KENW3EA ** 10KENG3EA/10KENW3EA *** 03KENG3SA/03KENG3SA *** 06KENG3SA/06KENG3SA *** 10KENG3SA/10KENG3SA V D E R0.08MAX. R2.0MAX. 0.0315~0.063 0.8~1.6 SUGGESTED MOUNTING CUTOUT 1.12MAX. 28.4MAX. 2-12 G3EA UNIT: INCH mm