AFB0624EHDC9

SPECIFICATION FOR APPROVAL Customer : Digikey Description : DC FAN Customer Part No. Delta Model No. : AFB0624EHDC9 Sample Issue No. : Sample Issue Date : DEC.12 2017 REV. : REV. : 1 00 PLEASE SEND ONE COPY OF THIS SPECIFICAITON BACK AFTER YOU SIGNED APPROVAL FOR PRODUCTION PRE-ARRANGMENT. APPROVED BY: DATE : DELTA ELECTRONICS, INC. TAOYUAN PLANT 252, SHANG YING ROAD, KUEI SAN INDUSTRIAL ZONE TAOYUAN SHIEN, TAIWAN, R.O.C. TEL:886-(0)3-3591968 FAX:886-(0)3-3591991 *** SAMPLE HISTORY*** CUSTOMER: CUSTOMER P/N: DELTA MODEL: REV. Digikey AFB0624EHDC9 DESCRIPTION 00 ISSUE SPEC DRAWN CHECKED ME EE 李宜霖 黃嵩哲 李宜霖 11/17'17 11/17'17 11/17'17 CE --- APPROVED ISSUE DATE 吳俊男 12/12'17 11/17'17 Delta Electronics, Inc. No.252, Shanying Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) TEL : 886-(0)3-3591968 FAX : 886-(0)3-3591991 STATEMENT OF DEVIATION ■ NONE □ DESCRIPTION: Delta Electronics, Inc. No.252, Shanying Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) TEL : 886-(0)3-3591968 FAX : 886-(0)3-3591991 Specification For Approval Customer : Digikey Description : DC FAN Customer P/N : rev. : Delta model no. : AFB0624EHDC9 Delta Safety Model No.: AFB0624EH Sample revision. : 00 Sample issue date : DEC.12 2017 Issue no.: Quantity : 1. SCOPE: THIS SPECIFICATION DEFINES THE ELECTRICAL AND MECHANICAL CHARACTERISTICS OF THE DC BRUSHLESS AXIAL FLOW FAN. 2. CHARACTERS: ITEM RATED VOLTAGE OPERATION VOLTAGE INPUT CURRENT(AVG.) DESCRIPTION 24V 14.0 - 27.6 VDC 0.24(MAX. 0.32) A SAFETY CURRENT ON LABEL : 0.36A INPUT POWER(AVG.) SPEED (AT RATED VOLTAGE) 5.76 (MAX.7.68) W 6800±10% R.P.M. MAX. AIR FLOW (AT ZERO STATIC PRESSURE) 1.086 (MIN. 0.977) M3 /MIN. 38.35(MIN. 34.50) CFM MAX. AIR PRESSURE (AT ZERO AIRFLOW) 13.81(MIN. 11.18) mmH2O 0.544 (MIN. 0.441) inchH2O ACOUSTICAL NOISE (AVG.) INGRESS PROTECTION INSULATION TYPE INSULATION STRENGTH DIELECTRIC STRENGTH 46.5 (MAX. 50.5) dB-A IP55 (IEC60529) UL: CLASS A 10 MEG OHM MIN. AT 500 VDC (BETWEEN FRAME AND (+) TERMINAL) 5 mA MAX. AT 500 VAC 50/60 Hz ONE MINUTE, (BETWEEN FRAME AND (+) TERMINAL) (continued) PAGE 1 PART NO: DELTA MODEL: AFB0624EHDC9 LIFE EXPECTANCE (L10) (AT LABEL VOLTAGE) 70,000 HOURS CONTINUOUS OPERATION AT 40 ° C WITH 15 ~ 65 %RH. ROTATION CLOCKWISE VIEW FROM NAME PLAT SIDE LOCKED PROTECTION THE CURRENT WILL SHUT DOWN, WHEN ROTOR LOCKED AND FIXED. NOTES: 1. ALL READINGS ARE MEASURED AFTER STABLY WARMING UP THROUGH 10 MINUTES. 2. STANDARD AIR PROPERTY IS AIR AT (Td) 25°C TEMPERATURE, (RH) 65% RELATIVE HUMIDITY , AND (Pb) 760 mmHg BAROMETRIC PRESSURE. 3. THE VALUES WRITTEN IN PARENS , ( ), ARE LIMITED SPEC. 4. ACOUSTICAL NOISE MEASURING CONDITION: NOISE IS MEASURED AT RATED VOLTAGE IN FREE AIR IN ANECHOIC CHAMBER WITH B & K SOUND LEVEL METER WITH MICROPHONE AT A DISTANCE OF ONE METER FROM THE FAN INTAKE. PAGE 2 PART NO: DELTA MODEL: AFB0624EHDC9 3.MECHANICAL: 3-1. DIMENSIONS-------------------------------------------- SEE DIMENSIONS DRAWING 3-2. FRAME------------------------------------------------------------------- PLASTIC UL: 94V-0 3-3. IMPELLER--------------------------------------------------------------- PLASTIC UL: 94V-0 3-4. BEARING SYSTEM---------------------------------------------- TWO BALL BEARINGS 3-5. WEIGHT---------------------------------------------------------------------- 80 GRAMS(REF.) 4. ENVIRONMENTAL: 4-1. OPERATING TEMPERATURE------------------------------ -10 TO +70 DEGREE C 4-2. STORAGE TEMPERATURE--------------------------------- -40 TO +75 DEGREE C 4-3. OPERATING HUMIDITY----------------------------------------------------- 5 TO 90 % RH 4-4. STORAGE HUMIDITY-------------------------------------------------------- 5 TO 95 % RH 5. PROTECTION: 5-1. LOCKED ROTOR PROTECTION IMPEDANCE OF MOTOR WINDING PROTECTS MOTOR FROM FIRE IN 96 HOURS OF LOCKED ROTOR CONDITION AT THE RATED VOLTAGE. 5-2. POLARITY PROTECTION BE CAPABLE OF WITHSTANDING IF REVERSE CONNECTION FOR POSITIVEAND NEGATIVE LEADS. 6. RE OZONE DEPLETING SUBSTANCES: 6-1. NO CONTAINING PBBs, PBBOs, CFCs, PBBEs, PBDPEs AND HCFCs. 7. PRODUCTION LOCATION 7-1. PRODUCTS WILL BE PRODUCED IN CHINA OR THAILAND. PAGE 3 PART NO: DELTA MODEL: AFB0624EHDC9 8. P & Q CURVE: *TEST CONDITION: INPUT VOLTAGE-----OPERATION VOLTAGE TEMPERATURE-----ROOM TEMPERATURE HUMIDITY-----65%RH PAGE 4 PART NO: DELTA MODEL: AFB0624EHDC9 9. DIMENSION DRAWING: LABEL: Digikey NOTES: 1.THIS PRODUCT IS ROHS COMPLIANT. 2. CABLE WIRE: UL1007 AWG#24. RED WIRE-----(+) BLACK WIRE-----(-) BLUE WIRE------(R00) PAGE 5 PART NO: DELTA MODEL: AFB0624EHDC9 10. ROTATION DEFECT (RD) SIGNAL: 10-1. OUTPUT CIRCUIT - OPEN COLLECTOR MODE: VRD Ic MOTOR DRIVER R VCE RD SIGNAL CAUTION: THE LEAD WIRE OF RD SIGNAL CAN NOT TOUCH THE LEAD WIRE OF POSITIVE OR NEGATIVE. 10-2. SPECIFICATION: VRD= 5.0 TYP.(Vcc MAX.) Ic = 5mA MAX. R ≧ VRD /Ic VCE= 0.5V MAX. 10-3. ROTATION DEFECT WAVEFORM: VRD 0.5V MAX. RUNNING LOCKED PAGE 6 RUNNING Application Notice 1. Delta will not guarantee the performance of the products if the application condition falls outside the parameters set forth in the specification. 2. A written request should be submitted to Delta prior to approval if deviation from this specification is required. 3. Please exercise caution when handling fans. Damage may be caused when pressure is applied to the impeller, if the fans are handled by the lead wires, or if the fan was hard-dropped to the production floor. 4. Except as pertains to some special designs, there is no guarantee that the products will be free from any such safety problems or failures as caused by the introduction of powder, droplets of water or encroachment of insect into the hub. 5. The above-mentioned conditions are representative of some unique examples and viewed as the first point of reference prior to all other information. 6. It is very important to establish the correct polarity before connecting the fan to the power source. Positive (+) and Negative (-). Damage may be caused to the fans if connection is with reverse polarity, if there is no foolproof method to protect against such error specifically mentioned in this spec. 7. Delta fans without special protection are not suitable where any corrosive fluids are introduced to their environment. 8. Please ensure all fans are stored according to the storage temperature limits specified. Do not store fans in a high humidity environment. We highly recommend performance testing is conducted before shipping, if the fans have been stored over 6 months. 9. Not all fans are provided with the Lock Rotor Protection feature. If you impair the rotation of the impeller for the fans that do not have this function, the performance of those fans will lead to failure. 10. Please be cautious when mounting the fan. Incorrect mounting of fans may cause excess resonance, vibration and subsequent noise. 11. It is important to consider safety when testing the fans. A suitable fan guard should be fitted to the fan to guard against any potential for personal injury. 12. Except where specifically stated, all tests are carried out at room (ambient) temperature and relative humidity conditions of 25oC, 65% RH. The test value is only for fan performance itself. 13. Be certain to connect an “ 4.7µF or greater” capacitor to the fan externally when the application calls for using multiple fans in parallel, to avoid any unstable power.