CML0306-0N8-CNH

(1/8) CYNTEC CO., LTD. 乾坤科技股份有限公司 0201 Series Thin Film Chip Inductor 1. Scope This specification applies to 0.6mm x 0.3mm (0201) size, fixed thin film chip inductor rectangular type. 2. Type Designation － CML0306 (1) ＊＊＊ － ＊ － (2) (3) NH (4) Where (1) Product Type CML : fixed thin film chip inductor (2) Nominal inductance value : three digits of number, refer to Table 1. The nominal inductance value shell is represented by two significant figures and a code “N” representing the unit. (3) Tolerance B : ±0.1nH ; C : ± 0.2nH ; S : ± 0.3nH H : ± 3% ; J : ± 5% (4) NH = Sn plating ( Lead free / Halogen free) 3. Construction and Physical Dimensions L a a W Code Letter Dimensions L 0.61 ± 0.05 W 0.31 ± 0.05 t 0.28 ± 0.05 a 0.08 ± 0.05 b 0.09 ± 0.05 Unit : mm t b

Note : ① Coil : Cu ② Electrode : plating Sn plating (Lead free) ③ Protective Coat : Epoxy Resin coating ④ Substrate : Alumina ceramic This datasheet is download from CYNTEC website. All specifications are subject to change without notice in advance. Please check with our sales for detail. The completely specification information will be disclosed in our product approval sheet. Please contact our sales for completely approval sheet before ordering. (2/8) CYNTEC CO., LTD. 乾坤科技股份有限公司 4. Specifications Table 1 Electric Specification Characteristics Inductance Tolerance (nH) CML0306-0N6

± 0.1nH Q LQ Meas. Freq. Self Resonance Freq. DC Resistance Rated Current min. (MHz) (MHz)min. (Ω Ω)max. (mA) --- 100 6000 0.10 900 CML0306-0N7 --- 6000 0.10 850 CML0306-0N8 --- 6000 0.10 850 CML0306-0N9 --- 6000 0.10 800 CML0306-1N0 5 6000 0.10 800 CML0306-1N1 5 6000 0.10 800 CML0306-1N2 5 6000 0.10 800 CML0306-1N3 5 6000 0.12 650 CML0306-1N4 5 6000 0.13 650 CML0306-1N5 5 6000 0.16 650 CML0306-1N6 5 6000 0.16 650 CML0306-1N7 5 6000 0.20 650 CML0306-1N8 5 6000 0.20 650 CML0306-1N9 4 6000 0.20 620 CML0306-2N0 4 6000 0.20 620 CML0306-2N1 4 6000 0.20 620 CML0306-2N2 4 6000 0.20 620 CML0306-2N3 4 6000 0.20 500 CML0306-2N4 4 6000 0.20 500 CML0306-2N5 4 6000 0.20 500 CML0306-2N6 4 6000 0.20 500 CML0306-2N7 4 6000 0.23 500 CML0306-2N8 4 6000 0.25 500 CML0306-2N9 4 6000 0.25 500 CML0306-3N0 4 6000 0.30 450 CML0306-3N1 4 6000 0.30 450 CML0306-3N2 4 6000 0.30 450 CML0306-3N3 4 6000 0.30 450 CML0306-3N4 4 6000 0.32 450 CML0306-3N5 4 6000 0.32 450 CML0306-3N6 4 6000 0.32 400 CML0306-3N7 4 6000 0.40 400 CML0306-3N8 4 6000 0.40 CML0306-3N9 4 6000 0.40 350 350 This datasheet is download from CYNTEC website. All specifications are subject to change without notice in advance. Please check with our sales for detail. The completely specification information will be disclosed in our product approval sheet. Please contact our sales for completely approval sheet before ordering. (3/8) CYNTEC CO., LTD. 乾坤科技股份有限公司 CML0306-4N3 4 6000 0.40 300 CML0306-4N7 4 6000 0.45 280 CML0306-5N1 4 6000 0.50 270 CML0306-5N3 4 6000 0.55 260 CML0306-5N6 4 6000 0.55 260 4 6000 0.60 250 4 5500 0.70 230 5000 1.10 180 CML0306-6N2 CML0306-6N8 CML0306-7N5 ± 3% ± 5% 4 100 CML0306-8N2 4 5000 1.20 180 CML0306-9N1 4 4500 1.20 180 CML0306-10N 4 4500 1.30 180 CML0306-12N 4 3700 1.30 180 CML0306-15N 4 3700 1.50 180 CML0306-18N 4 3100 1.70 160 CML0306-22N 4 2800 2.55 120
Operating Temperature Range 4-1 Operating Temperature Range : -40 to 85℃ 4-2

Storage Temperature Range : -40 to 85℃ This datasheet is download from CYNTEC website. All specifications are subject to change without notice in advance. Please check with our sales for detail. The completely specification information will be disclosed in our product approval sheet. Please contact our sales for completely approval sheet before ordering. (4/8) CYNTEC CO., LTD. 乾坤科技股份有限公司
L, Q vs Frequency Typical Characteristics Table Inductance ( nH ) Part Number

Q 500MHz 800MHz 1.8GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.4GHz CML0306-0N6 0.6 0.6 0.6 0.6 30min 50min 75min 77min CML0306-0N7 0.7 0.7 0.7 0.7 30min 50min 70min 77min CML0306-0N8 0.8 0.8 0.8 0.8 30min 50min 70min 77min CML0306-0N9 0.9 0.9 0.9 0.9 30min 50min 70min 77min CML0306-1N0 1.0 1.0 1.0 1.0 25 31 56 62 CML0306-1N2 1.2 1.2 1.2 1.2 25 31 55 60 CML0306-1N5 1.5 1.4 1.4 1.4 24 31 53 58 CML0306-1N8 1.8 1.8 1.8 1.8 24 31 51 58 CML0306-2N0 1.9 1.9 1.9 1.9 24 30 50 57 CML0306-2N2 2.1 2.1 2.1 2.1 23 29 49 56 CML0306-2N4 2.3 2.3 2.2 2.2 22 28 47 53 CML0306-2N7 2.7 2.6 2.6 2.6 21 28 45 47 CML0306-3N0 2.9 2.9 2.8 2.8 20 25 42 48 CML0306-3N3 3.1 3.1 3.1 3.1 18 23 37 41 CML0306-3N6 3.4 3.3 3.3 3.3 18 23 35 39 CML0306-3N9 3.7 3.7 3.7 3.7 20 25 39 44 CML0306-4N3 4.1 4.1 4.1 4.1 19 24 38 42 CML0306-4N7 4.5 4.5 4.5 4.7 17 22 33 36 CML0306-5N1 4.8 4.8 4.8 5.0 17 21 31 33 CML0306-5N3 5.2 5.2 5.4 5.7 17 22 31 32 CML0306-5N6 5.5 5.4 5.5 5.7 17 22 33 36 CML0306-6N2 5.9 5.9 6.0 6.2 17 21 31 33 CML0306-6N8 6.6 6.6 6.7 7.0 18 23 33 35 CML0306-8N2 7.9 7.9 8.2 8.8 15 19 24 23 CML0306-9N1 8.7 8.7 9.1 9.8 14 18 24 23 CML0306-10N 9.5 9.5 10.4 11.6 15 18 22 20 CML0306-12N 11.5 11.6 13.6 16.4 13 16 18 16 CML0306-15N 14.4 14.6 17.9 --- 13 16 17 --- CML0306-18N 18 18 24 --- 13 15 15 --- CML0306-22N 21.5 22.2 --- --- 12 14 --- --- This datasheet is download from CYNTEC website. All specifications are subject to change without notice in advance. Please check with our sales for detail. The completely specification information will be disclosed in our product approval sheet. Please contact our sales for completely approval sheet before ordering. (5/8) CYNTEC CO., LTD. 乾坤科技股份有限公司 5.Packaging 5-1 Dimensions 5-1-1 Tape Packaging Dimensions 1.5 +-0.1 0.0 0.3 ± 0.05 Sprocket hole 4.0 ± 0.1 1.75 ±0.1 3.5 ± 0.05 B Inductor 8.0 ± 0.3 A Carrier cavity 0.42 ± 0.05 4.0 ± 0.1 2.0 ± 0.05 Pull Direction ※ “Bottom less type” of tape is used. ※ Pre.emptied holes：150 holes (or 30cm) or more Code Letter A B Dimension 0.70 ± 0.03 0.43 ± 0.03 Unit : mm 5-1-2 Reel Dimensions 13 ± 1.4 50 105 2 ± 0.5 13 ± 0.2 +1 60-0 21 ± 0.8 R1 Label +0 180-3 9 ± 0.3 Unit : mm Plastic Reel Thickness : 0.5mm Plastic Reel : Correspond with EIAJ RRV08B

This datasheet is download from CYNTEC website. All specifications are subject to change without notice in advance. Please check with our sales for detail. The completely specification information will be disclosed in our product approval sheet. Please contact our sales for completely approval sheet before ordering. (6/8) CYNTEC CO., LTD. 乾坤科技股份有限公司 5-2 Peel Strength of Top Cover Tape The peel speed shall be about 300 mm/minute The peel strength of top cover tape shall be between 0.1 to 0.7N. Top Cover Tape 165 ~ 180 ° 0.1 ~0.7N Pull out Bottom Cover Tape Carrier Tape 5-3 Quantity per Reel 10,000 pieces / reel 5-4 Label Marking The following items shall be marked on the reel. (1) Manufactures parts number (2) (3) (4) (5) (6) Quantity Manufacturing date code Manufacturer’s name The country of origin Shipping number (7) Identification showing lead-free products.

This datasheet is download from CYNTEC website. All specifications are subject to change without notice in advance. Please check with our sales for detail. The completely specification information will be disclosed in our product approval sheet. Please contact our sales for completely approval sheet before ordering. CYNTEC CO., LTD. 乾坤科技股份有限公司 (7/8) 6. Precautions 6-1 Storage (1) The product shall be stored in a room where temperature and humidity must be controlled. (temperature: 5-35℃, humidity : 45-85% RH). However, humidity keeps it low, as it is possible. (2) The product shall be stored as direct sunshine doesn't hit on it. (3) The product shall be stored with on moisture, dust, a material that will make solderability inferior, and a harmful gas (hydrogen chloride, sulfurous acid gas, and hydrogen sulfide). (4) The product shall be stored as tape packaging condition. 6-2 Term for use (1) The term for use is within one year from the shipping day of the product. (2) If the product has been left unused for more than one year after delivered, check solderability before use.

This datasheet is download from CYNTEC website. All specifications are subject to change without notice in advance. Please check with our sales for detail. The completely specification information will be disclosed in our product approval sheet. Please contact our sales for completely approval sheet before ordering. CYNTEC CO., LTD. 乾坤科技股份有限公司 (8/8) 6-3 Chip mounting (1) When chip are mounted on PC board, protective coat of the product must not be scratched. If it will be scratched, it will make characteristic inferior. (2) In case that product will be soldered by soldering iron, heating shall be done on the land, and soldering iron must not hit on the product itself. (3) In case that resin coating or resin seal will be made for a PC board after chip mounting, do washing and drying it enough before coating or sealing. If ion bear or moisture will be sealed in resin coating, it will make characteristic inferior. (4) For resinous use, it is necessary to set up enough the curing conditions. As it gets improper for the condition, changes of a resistance value are large and are a case. (5) According to shape, material, and pressure of clamping in chip mounting machine, there is the case that crack will be appeared on the product. Control a shock energy for clamping the product under 7 x 10-4 J . With a shock energy around clamping that says here, it is suited to a potential energy, in case that iron block of 25 g is dropped naturally to the product placed on iron plate for the height of 2.8mm. (6) The glue to fix the product on the PC board around chip mounting, it is needed high insulation resistance and great performance or moisture. And it is needed that these characteristics are not inferno in using temperature range and a hot spot temperature to be acting.

This datasheet is download from CYNTEC website. All specifications are subject to change without notice in advance. Please check with our sales for detail. The completely specification information will be disclosed in our product approval sheet. Please contact our sales for completely approval sheet before ordering.