DC02S0512A

DC02S/D Series 2W DC/DC CONVERTER, DIP-Package, High Isolation FEATURES Š Efficiency up to 64% Š Regulated Outputs Š Short Circuit Protection Š High Isolation Voltage 6000VDC Š Low Leakage Current Š Low Isolation Capacitance Š Low Ripple & Noise Š Complies with EN55022 Class A Š Lead free, RoHs Compliant Š 3 Years Product Warranty The DC02S/D series are miniature, DIP Package, isolated 2W DC/DC converters with ultra- high 6,000VDC isolation . It offers short circuit protection and allows a wide operating temperature range of –25°C to +75°C.These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions Model List Model Number DC02S0505A DC02S0512A DC02S0515A DC02D0505A DC02D0512A DC02D0515A DC02S1205A DC02S1212A DC02S1215A DC02D1205A DC02D1212A DC02D1215A DC02S2405A DC02S2412A DC02S2415A DC02D2405A DC02D2412A DC02D2415A Input Voltage (Range) Output Voltage VDC VDC 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 (4.5 ~ 5.5) 12 (10.8 ~ 13.2) 24 (21.6 ~ 26.4) Output Current Max. Min. mA 400 165 133 ±100 ±83 ±66 400 165 133 ±100 ±83 ±66 400 165 133 ±100 ±83 ±66 mA 0 0 0 Input Current @Max. Load @No Load mA(typ.) 645 629 623 476 699 695 269 262 260 185 281 280 134 131 130 93 143 142 mA(typ.) Reflected Ripple Current Max. capacitive Load mA (typ.) uF 680 100 15 270* 680 50 8 270* 680 30 3 270* Efficiency (typ.) @Max. Load % 62 63 64 42 57 57 62 63 64 45 59 59 62 63 64 45 58 58 * For each output DS_DC02S/D_03152012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P1 Input Characteristics Parameter Input Voltage Range Input Surge Voltage (1 sec. max.) Model Min. Typ. Max. 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 5V Input Models -0.7 --- 7.5 12V Input Models -0.7 --- 15 24V Input Models -0.7 --- 30 Reverse Polarity Input Current Short Circuit Input Power Internal Power Dissipation Conducted EMI All Models Unit VDC ----0.5 A ----2000 mW ----2000 mW Compliance to EN 55022,class A and FCC part 15,class A Output Characteristics Parameter Conditions Min. Typ. Max. Unit --- ±2.0 ±4.0 % Dual Output, Balanced Loads --- ±2.0 ±4.0 % Line Regulation Vin=Min. to Max. --- ±0.3 ±0.5 % Load Regulation Io=10% to 100% --- ±0.5 ±1.0 % --- 30 50 mV P-P --- --- 100 mV P-P --- --- 15 mV rms --- ±0.01 ±0.02 %/℃ Output Voltage Accuracy Output Voltage Balance Ripple & Noise (20MHz) Ripple & Noise (20MHz) Over Line, Load & Temp. Ripple & Noise (20MHz) Temperature Coefficient Short Circuit Protection Continuous General Characteristics Parameter Conditions Min. Typ. Max. Unit 60 Seconds 6000 --- --- VDC Flash tested for 1 Second 8000 --- --- VPK 240VAC, 60Hz --- --- 2 uA I/O Isolation Resistance 500 VDC 10 --- --- GΩ I/O Isolation Capacitance 100KHz, 1V I/O Isolation Voltage (rated) I/O Isolation Test Voltage Leakage Current Switching Frequency MTBF(calculated) MIL-HDBK-217F@25℃, Ground Benign --- 20 30 pF 25 --- 80 KHz 600,000 --- --- Hours Recommended Input Fuse 5V Input Models 12V Input Models 24V Input Models 1000mA Slow-Blow Type 500mA Slow-Blow Type 250mA Slow-Blow Type Environmental Characteristics Parameter Operating Temperature Range (with Derating) Case Temperature Conditions Min. Max. Unit Ambient -25 +75 ℃ --- +90 ℃ Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H 260 ℃ Cooling Lead Temperature (1.5mm from case for 10Sec.) DS_DC02S/D_03152012 Free-Air convection --- E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P2 Output Power (%) Power Derating Curve Notes 1 2 3 4 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Ripple & Noise measurement bandwidth is 0-20 MHz. All DC/DC converters should be externally fused at the front end for protection. Specifications subject to change without notice. Mechancial Drawing Pin Connections 3.8 [0.15] 10.2 [0.40] Mechanical Dimensions 0.50 [0.02] 11 12 Bottom View 24 15 23 20.32 [0.80] 2.54 [0.10] 31.8 [1.25] 20.3 [0.80] 10 15.22 [0.60] 2 Single Output 1 +Vin Dual Output +Vin 2 +Vin +Vin 10 No Pin Common 11 No Pin Common 12 -Vout No Pin 13 +Vout -Vout 15 No Pin +Vout 23 -Vin -Vin 24 -Vin -Vin 13 5.08 [0.20] 2.0 [0.08] 2.54 [0.10] 1 Pin ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ►Pin pitch tolerance: ±0.25 (0.01) Physical Outline Case Size Case Material Weight : : : DS_DC02S/D_03152012 31.8x20.3x10.2mm (1.25x0.8x0.40 Inches) Non-Conductive Black Plastic (flammability to UL 94V-0 rated) 12.4g E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P3 Part Numbering System D C 02 S 05 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_DC02S/D_03152012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Delta Electronics: DC02D1205A DC02S2412A DC02S1212A DC02D0505A DC02D2405A DC02S2415A DC02S0512A DC02S1215A DC02D2412A DC02D1212A DC02S0515A DC02D0512A DC02S2405A DC02S0505A DC02D2415A DC02D1215A DC02S1205A DC02D0515A