FC-5432-10A-C2-C

FUSE FC-5432-10A-(C1~C4)-C Features / Applications :       OverCurrent Protection: Protect batteries from abnormal overcurrent behavior. OverVoltage Protection: Protect batteries from abnormal overvoltage behavior. Surface mountable fuse Halogen free Fast response time UL certificated: E314624 / TUV file number: TA50201483 Electrical Specifications : Characteristics Feature Rated Voltage(*1) 35VDC Rated Breaking Capacity 50A Re-flow Temp.(MAX) 260℃ Fuse Resistance(Typical) 2.5~4.5mΩ C1: 1.25~2.65Ω C2: 1.7~2.65Ω Heater Resistance C3: 5.0~8.0Ω C4: 9.8~16.5Ω C1: 4.0~7.0V C2: 4.0~9.0V Operating Voltage C3: 7.0~14.0V C4: 10.5~19.5V Note: Maximum voltage is not the operating voltage for the heater. 1 DOCUMENT : FC543210A-C REVISION : A5 FC-5432-10A-(C1~C4)-C Outline Drawing : Dimensions Top View Bottom view L 5.40 ± 0.25 W 3.20 ± 0.20 T 1.05 ± 0.10 a 2.20 ± 0.20 b 0.85 ± 0.20 c 0.45 ± 0.20 d 1.70 ± 0.20 e 1.05 ± 0.20 f 1.60 ± 0.20 g 1.40 ± 0.20 h 0.65 ± 0.20 Side View Unit: mm Type Designation : FC (1) - 5432 (2) - 10A (3) - Note: (1) FC：Series number (2) 5432：5.4 mm * 3.2 mm size (3) 10A：Rated current (4) C□：Cells C1：One cell C2：Two cells C3：Three cells C4：Four cells (5) C：C version 2 DOCUMENT : FC543210A-C REVISION : A5 C□ (4) - C (5) FC-5432-10A-(C1~C4)-C Characteristics : Electric performance Item Specification and Requirement Fusing Time vs Electric Power Fusing Time vs Voltage ※10AC1 Heater resistance is about 1.9Ω ※10AC2 Heater resistance is about 2.3Ω ※10AC3 Heater resistance is about 6.3Ω ※10AC4 Heater resistance is about 13.5Ω Fusing Time by Heater vs Ambient Temperature ※Testing Power: 6.5W 3 DOCUMENT : FC543210A-C REVISION : A5 FC-5432-10A-(C1~C4)-C Fusing Time vs Current ※10A Fuse resistance is about 3.2 mΩ (Fusing Current = 20A) Fusing Time by Current vs Ambient Temperature ※10A Fuse resistance is about 3.2mΩ (Fusing Current = 20A) Current Carrying Capacity ※Measure the current to reach the surface temperature which is 100℃ with different ambient temperature. ※Fuse resistance is about 3.2 mΩ 4 DOCUMENT : FC543210A-C REVISION : A5 FC-5432-10A-(C1~C4)-C Reliability Test Item Carrying capacity (UL248-14) Temperature Rise (UL248-14) Condition of Test 100% of rated current, 4hr 100% of rated current, measure of surface temperature. Requirements Without melting T < 75℃ 200% rated current; Fusing time (UL248-14) C1、C3、C4: 6W~39W shall be applied to heater. Clearing time < 1 min C2: 6W~40W shall be applied to heater. Interrupting Ability Residual Resistance (UL248-14) Solderability (JEDEC J-STD-020D) After the fuse is interrupted, rated voltage applied for 30sec again. Measure DC resistance after fusing. Current Rush Withstand Uniform coating of solder Immersion Duration: 3  0.5 second cover minimum of 95% Refer to JIS C 5201-1 4.17 surface being immersed R:  10% Without distinct damage in appearance R < 10% -55℃/25℃/125℃/25℃, 100 cycles. Without distinct damage in appearance 80A-10ms-On, 9990ms-Off, 500cycle. No fusing 5 DOCUMENT : FC543210A-C REVISION : A5 > 10kΩ Temperature of Solder: 245  5℃ High Temperature Exposure Kept at 100℃ for 1,000 hours. (JESD22-A103C) Thermal Shock (JESD22-A104C) No mechanical damages FC-5432-10A-(C1~C4)-C Recommended Solder Pad Dimensions: The printed circuit board thickness is 1.2mm. The thickness of tin plated copper layers is 2oz. Recommended thickness of solder printing board is 0.12mm at least. Type a b c d 10A 11.7 1.5 6 1.5 Unit: mm Chip setting 6 DOCUMENT : FC543210A-C REVISION : A5 FC-5432-10A-(C1~C4)-C Packaging : Tape packaging dimensions Direction The direction shall be seen from the top cover tape side. Unreeling direction 7 DOCUMENT : FC543210A-C REVISION : A5 FC-5432-10A-(C1~C4)-C Reel dimensions Number of Taping: 2,000 pieces/reel Peel strength of top cover tape : The peel speed shall be about 300mm/min. Label Marking: The following items shall be marked on the reel: 1. 2. 3. 4. 5. Type designation Quantity Manufacturing date code Manufacturer’s name The country of origin 8 DOCUMENT : FC543210A-C REVISION : A5 FC-5432-10A-(C1~C4)-C Sn plating Reflow Profile : Tp Temperature 260℃ tp:30 5 Sec max. Max. Ramp Up Rate =3℃/s Max. Ramp Down Rate =6℃/s 217℃ 60~150 Sec Preheat Area 200℃ 150℃ 60~120 Sec 25℃ 25°C to Peak ( 8 minutes max.) Time Reflow Soldering Method: Reflow Soldering Tp: 255~260℃ Max. 5 seconds 217℃ 60~150 seconds 150~200℃ 60~120 seconds Pre-Heat Time 25℃ to peak temperature 8 minutes max. Note: Meet JEDEC J-STD-020D Characteristics : Functional temperature range: -25~85℃ Operating temperature range: -10~65℃ (Fusing time