FD-4030-12A-C2-C

FUSE FD-4030-12A-(C1~C4)-C Features / Applications :       OverCurrent Protection: Protect batteries from abnormal overcurrent behavior. OverVoltage Protection: Protect batteries from abnormal overvoltage behavior. Surface mountable fuse Halogen free Fast response time UL certificated: E314624 / TUV file number: TA50201483 Electrical Specifications : Characteristics Feature Rated Voltage(*1) 35VDC Rated Breaking Capacity 50A Re-flow Temp.(MAX) 260℃ Fuse Resistance(Typical) 2~4mΩ C1: 0.63~1.35Ω C2: 2.00~2.65Ω Heater Resistance C3: 5.00~9.00Ω C4: 9.80~18.0Ω C1: 3.00~4.50V C2: 4.00~9.00V Operating Voltage C3: 7.40~14.0V C4: 10.5~19.6V Note: Maximum voltage is not the operating voltage for the heater. 1 DOCUMENT : FD403012A-C REVISION : A3 FD-4030-12A-(C1~C4)-C Outline Drawing : Dimensions L W T a b Top View c Bottom view d e f g h i j Side View - 4030 (2) - 12A (3) - Note: (1) FD：Series number (2) 4030：4.0 mm * 3.0 mm size (3) 12A：Rated current (4) C□：Cells C1：One cell C2：Two cell C3：Three cell C4：Four cell (5) C：C version 2 DOCUMENT : FD403012A-C REVISION : A3 0.20 0.20 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Unit: mm Type Designation : FD (1) 4.00 ± 3.00 ± 0.85 ± 1.40 ± 0.80 ± 0.60 ± 1.40 ± 0.60 ± 0.70 ± 0.92 ± 2.20 ± 1.20 ± 0.60 ± C□ (4) - C (5) FD-4030-12A-(C1~C4)-C Characteristics : Electric performance Item Specification and Requirement Fusing Time vs Electric Power Fusing Time vs Voltage ※12AC1 Heater resistance is about 1.00 Ω ※12AC2 Heater resistance is about 2.30 Ω ※12AC3 Heater resistance is about 7.00 Ω ※12AC4 Heater resistance is about 13.9 Ω Fusing Time by Heater vs Ambient Temperature ※Testing Power: 6W 3 DOCUMENT : FD403012A-C REVISION : A3 FD-4030-12A-(C1~C4)-C Fusing Time vs Current ※12A Fuse resistance is about 3.0 mΩ Fusing Time by Current vs Ambient Temperature ※12A Fuse resistance is about 3.0 mΩ (Fusing Current = 24A) Current Carrying Capacity ※Measure the current to reach the surface temperature which is 100℃ with different ambient temperature. ※Fuse resistance is about 3.0 mΩ 4 DOCUMENT : FD403012A-C REVISION : A3 FD-4030-12A-(C1~C4)-C Reliability Test Item Carrying capacity (UL248-14) Temperature Rise (UL248-14) Condition of Test 100% of rated current, 4hr 100% of rated current, measure of surface temperature. Requirements Without melting T < 75℃ 200% rated current; Fusing time (UL248-14) C1、C3、C4 : 6W~39W shall be applied to heater. Clearing time < 1 min C2 : 6W~40W shall be applied to heater. Interrupting Ability Residual Resistance (UL248-14) Solderability (JEDEC J-STD-020D) After the fuse is interrupted, rated voltage applied for 30sec again. Measure DC resistance after fusing. Current Rush Withstand Uniform coating of solder Immersion Duration: 3  0.5 second cover minimum of 95% Refer to JIS C 5201-1 4.17 surface being immersed R:  10% Without distinct damage in appearance R < 10% -55℃/25℃/125℃/25℃, 100 cycles. Without distinct damage in appearance 80A-10ms-On, 9990ms-Off, 500cycle. No fusing 5 DOCUMENT : FD403012A-C REVISION : A3 > 10kΩ Temperature of Solder: 245  5℃ High Temperature Exposure Kept at 100℃ for 1,000 hours. (JESD22-A103C) Thermal Shock (JESD22-A104C) No mechanical damages FD-4030-12A-(C1~C4)-C Recommended Solder Pad Dimensions: The printed circuit board thickness is 0.6mm. The thickness of tin plated copper layers is 2oz. Recommended thickness of solder printing board is 0.12mm at least. Type a b c 12A 8.0 2.0 14 Unit: mm Chip setting 6 DOCUMENT : FD403012A-C REVISION : A3 FD-4030-12A-(C1~C4)-C Packaging : Tape packaging dimensions Direction The direction shall be seen from the top cover tape side. Unreeling direction 7 DOCUMENT : FD403012A-C REVISION : A3 FD-4030-12A-(C1~C4)-C Reel dimensions Number of Taping: 2,000 pieces/reel Peel strength of top cover tape : The peel speed shall be about 300mm/min. Label Marking: The following items shall be marked on the reel: 1. 2. 3. 4. 5. Type designation Quantity Manufacturing date code Manufacturer’s name The country of origin 8 DOCUMENT : FD403012A-C REVISION : A3 FD-4030-12A-(C1~C4)-C Sn plating Reflow Profile : Tp Temperature 260℃ tp:30 5 Sec max. Max. Ramp Up Rate =3℃/s Max. Ramp Down Rate =6℃/s 217℃ 60~150 Sec Preheat Area 200℃ 150℃ 60~120 Sec 25℃ 25°C to Peak ( 8 minutes max.) Time Reflow Soldering Method: Reflow Soldering Tp: 255~260℃ Max. 5 seconds 217℃ 60~150 seconds 150~200℃ 60~120 seconds Pre-Heat Time 25℃ to peak temperature 8 minutes max. Note: Meet JEDEC J-STD-020D Characteristics : Functional temperature range: -25~85℃ Operating temperature range: -10~65℃ (Fusing time