FHS-A9015S00

FHS-A9015S00 DELTA ELECTRONICS, INC. Application: Picture: Intel Nehalem LGA1156 (45nm) & Intel Sandy Bridge LGA1155 (32nm) Thermal & Mechanical Spec Thermal performance for 45 W CPU HSK Assembly Weight: 120 g (ref.) Clipping Force: 16 Kgf (ref.) Component Specification: 1. Heat Sink Type: Thermal Shrink Material: Aluminum A6063 Dimension: 90*90*30 mm 2. Thermal interface material Material: Dow Corning TC-5630 or Equivalent. 3. Fan (90x90x17 mm with Thermistor & PWM Control) Rated Voltage: 12 V Life Time: Superflo bearing 50000 hrs Connector: a. Lead wire: UL 10368 -F- AWG#28 pin 1: black wire--------(-) pin 2: yellow wire----------(+) pin 3: green wire---------(F00) pin 4: blue wire------------(PWM) b. Housing: Molex 47054-1000 or equivalent c. Terminal: Molex 2759T 08-50-0113 or equivalent * All readings are typical values at rated voltage. * Specifications are subject to change without notice DELTA ELECTRONICS, INC. 252, Shang Ying Road, Kuei San TAOYUAN SHIEN 333, TAIWAN,R.O.C. TEL: 886-3-3591968 EXT 2073 FAX: 886-3-3591991 DELTA PRODUCTS CORPORATION 4405 CUSHING PARKWAY FREMONT, CA 94538, U.S.A. TEL: 1-510-668-5100 FAX: 1-510-668-0680 DELTA ELECTRONICS(JAPAN), INC. DELTA SHIBADAIMON BLDG. 2-1-14 SHIBADAIMON, MINATO-KU, TOKYO, 105-0012, JAPAN TEL: 81-3-5733-1111 FAX: 81-3-5733-1211 DELTA ELECTRONICS EUROPE LTD. WEGALAAN 16, 2132 JC HOOFDDORP, THE NETHERLANDS TEL: 31-23-566-8989 FAX: 31-23-5668910 Date: July-2009 Delta Electronics Corp. APPROVAL SHEET Customer Name： ： Model Name： ： COOLER Model Name： ： FHS-A9015S00 Customer Part No： ： Spec Issue Date： ： 2015/12/14 Spec Revision： ： 02 PLEASE SEND ONE COPY OF THIS SPECIFICATION BACK AFTER YOU SIGNED APPROVAL FOR PRODUCTION PRE-ARRANGMENT. Approved By: Date: Approval Check Designer Skyler.Huang Form No. ︰tMP—D029 Form Rev. ︰00 Delta Electronics Corp. REV. Description Drawn Checked Approved Issue Date 00 ISSUE SPEC REEK.LI2011/11/25 01 ADD ROHS Skyler 2013/03/08 Skyler 2015/12/14 2011/11/25 2011/11/25 2011/11/25 1. Change the grease from 02 TC-1996 to TC-5630 2. Update RoHS Description: SAMPLE REVISION CODE LIST Part No. REV DELTA MODEL : FHS-A9015S00 Form No. ︰tMP—D029 TOTAL 78 PAGE Form Rev. 02 ︰00 Delta Electronics Corp. CONTENTS Item Element Description Page 1 Specification 5 2 Print 6 3 Packing Plan 14 4 Fan 17 5 RoHS Certification 28 Form No. ︰tMP—D029 Note Form Rev. ︰00 Delta Electronics Corp. 1. SPECIFICATION Characters Item Scope Description THIS SPECIFICATION DEFINES THE ELECTRICAL AND MECHANICAL CHARACTERISTICS OF THE HEATSINK Application Specification a: thermal Resistance b: total weight c: clip force INTEL CPU COOLER ℃ 0.52 ( /W) (REF.) 120 g (REF.) 16 kgf (REF.) BOM Item Form No. Part Name Material Part NO. Q’TY 1 Heatsink A6063-T5 3346771500 1 pce 2 FASTENER CAP PC 3470415400 4 pce 3 FASTENER BASE PC 3470415500 4 pce 4 LABEL PE 3267128700 1 pce 5 FAN PBT 3622920411 1 pce 6 TIM DOW TC-5630 4021107300 0.12g ︰tMP—D029 Remark Rev 02 Form Rev. ︰00 Delta Electronics Corp. 2. PRINT Assembly Drawing Form No. ︰tMP—D029 Form Rev. ︰00 Delta Electronics Corp. Parts Drawing Form No. ︰tMP—D029 Form Rev. ︰00 Delta Electronics Corp. 3. PACKING PLAN Packing Specification Form No. ︰tMP—D029 Form Rev. ︰00 Delta Electronics Corp. 4. FAN Form No. ︰tMP—D029 Form Rev. ︰00 SPECIFICATION FOR APPROVAL Customer TMPBU Description DC FAN Part No. REV. Delta Model No. AUC0912D-AF1F REV. 00 Sample Issue No. Sample Issue Date SEP.15.2010 PLEASE SEND ONE COPY OF THIS SPECIFICAITON BACK AFTER YOU SIGNED APPROVAL FOR PRODUCTION PRE-ARRANGMENT. APPROVED BY: DATE : DELTA ELECTRONICS, INC. TAOYUAN PLANT 252, SHANG YING ROAD, KUEI SAN INDUSTRIAL ZONE TAOYUAN SHIEN, TAIWAN, R.O.C. TEL:886-(0)3-3591968 FAX:886-(0)3-3591991 Application Notice 1. Delta will not guarantee the performance of the products if the application condition falls outside the parameters set forth in the specification. 2. A written request should be submitted to Delta prior to approval if deviation from this specification is required. 3. Please exercise caution when handling fans. Damage may be caused when pressure is applied to the impeller, if the fans are handled by the lead wires, or if the fan was hard-dropped to the production floor. 4. Except as pertains to some special designs, there is no guarantee that the products will be free from any such safety problems or failures as caused by the introduction of powder, droplets of water or encroachment of insect into the hub. 5. The above-mentioned conditions are representative of some unique examples and viewed as the first point of reference prior to all other information. 6. It is very important to establish the correct polarity before connecting the fan to the power source. Positive (+) and Negative (-). Damage may be caused to the fans if connection is with reverse polarity, if there is no foolproof method to protect against such error specifically mentioned in this spec. 7. Delta fans without special protection are not suitable where any corrosive fluids are introduced to their environment. 8. Please ensure all fans are stored according to the storage temperature limits specified. Do not store fans in a high humidity environment. We highly recommend performance testing is conducted before shipping, if the fans have been stored over 6 months. 9. Not all fans are provided with the Lock Rotor Protection feature. If you impair the rotation of the impeller for the fans that do not have this function, the performance of those fans will lead to failure. 10. Please be cautious when mounting the fan. Incorrect mounting of fans may cause excess resonance, vibration and subsequent noise. 11. It is important to consider safety when testing the fans. A suitable fan guard should be fitted to the fan to guard against any potential for personal injury. 12. Except where specifically stated, all tests are carried out at room (ambient) temperature and relative humidity conditions of 25oC, 65% RH. The test value is only for fan performance itself. 13. Be certain to connect an “ 4.7µF or greater” capacitor to the fan externally when the application calls for using multiple fans in parallel, to avoid any unstable power. Doc. No: FMBG-ES Form 001 Rev. 0001 Date: June 24, 2009 Delta Electronics Corp. 5. ROHS 5.1. PBT 5.2. AL6063-T5 5.3. PC 5.4. PET、INK、COATING 5.5. DOW TC-5630 Form No.︰tMP—D029 Form Rev.︰00 Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Page 1 of 13. KINGFA SCI. & TECH. CO., LTD. . NO.33 KEFENG ROAD,SCIENCE CITY,GUANGZHOU HI-TECHINDUSTRIAL DEVELOPMENT ZONE,GUANGZHOU CITY CHINA. . The following sample(s) was/were submitted and identified on behalf of the clients as : PBT-NPG30 . SGS Job No. : CP15-009615 - GZ . Date of Sample Received : . 09 Mar 2015. Testing Period : . 09 Mar 2015 - 13 Mar 2015 . Test Requested : . Selected test(s) as requested by client. . Test Method : . Please refer to next page(s). . Test Results : . Please refer to next page(s). . Conclusion :. Based on the performed tests on submitted sample(s), the results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBBs), Polybrominated diphenyl ethers (PBDEs) comply with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC. . Signed for and on behalf of SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch. Alkene Liang. Approved Signatory . Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Page 2 of 13. Test Results : . Test Part Description : . Specimen No.. SN1. SGS Sample ID. CAN15-030477.002 Description. Black plastic grains . Remarks :. (1) 1 mg/kg = 0.0001% . (2) MDL = Method Detection Limit . (3) ND = Not Detected ( < MDL ) . (4) "-" = Not Regulated . RoHS Directive 2011/65/EU. Test Method : . (1)With reference to IEC 62321-5:2013, determination of Cadmium by ICP-OES. (2)With reference to IEC 62321-5:2013, determination of Lead by ICP-OES. (3)With reference to IEC 62321-4:2013, determination of Mercury by ICP-OES. (4)With reference to IEC 62321:2008, determination of Hexavalent Chromium by Colorimetric Method using UV-Vis. (5)With reference to IEC 62321:2008, determination of PBBs and PBDEs by GC-MS. . Test Item(s). Limit. Unit. MDL. 002. Cadmium (Cd) . 100 mg/kg. 2 ND Lead (Pb). 1,000 mg/kg. 2 5 Mercury (Hg). 1,000 mg/kg. 2 ND Hexavalent Chromium (CrVI) . 1,000 mg/kg. 2 ND Sum of PBBs . 1,000 mg/kg. - ND Monobromobiphenyl . - mg/kg. 5 ND Dibromobiphenyl . - mg/kg. 5 ND Tribromobiphenyl . - mg/kg. 5 ND Tetrabromobiphenyl . - mg/kg. 5 ND Pentabromobiphenyl . - mg/kg. 5 ND Hexabromobiphenyl . - mg/kg. 5 ND Heptabromobiphenyl . - mg/kg. 5 ND Octabromobiphenyl . - mg/kg. 5 ND Nonabromobiphenyl . - mg/kg. 5 ND Decabromobiphenyl . Sum of PBDEs . Monobromodiphenyl ether . - mg/kg. 5 ND 1,000 mg/kg. - ND - mg/kg. 5 ND Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Limit. Unit. MDL. 002. Dibromodiphenyl ether . - mg/kg. 5 ND Tribromodiphenyl ether . - mg/kg. 5 ND Tetrabromodiphenyl ether . - mg/kg. 5 ND Pentabromodiphenyl ether . - mg/kg. 5 ND Hexabromodiphenyl ether . - mg/kg. 5 ND Heptabromodiphenyl ether . - mg/kg. 5 ND Octabromodiphenyl ether . - mg/kg. 5 ND Nonabromodiphenyl ether . - mg/kg. 5 ND Decabromodiphenyl ether . - mg/kg. 5 ND Test Item(s). Page 3 of 13. Notes :. (1) The maximum permissible limit is quoted from the directive 2011/65/EU, Annex II . Halogen. Test Method : . With reference to EN 14582: 2007, analysis was performed by Ion Chromatograph (IC). . Test Item(s). Chlorine (Cl). Bromine (Br). Unit. MDL. 002. mg/kg. mg/kg. 50 50 ND ND Elementary Analysis. Test Method : . With reference to US EPA Method 3052:1996, analysis was performed by ICP-OES. . Test Item(s). Sb₂O₃. Unit. MDL. 002. mg/kg. 12 ND Notes :. (1) ◆ Calculated concentration of Sb₂O₃ is based on the identified Sb . Polynuclear Aromatic Hydrocarbons (PAHs). Test Method : . With reference to ZEK 01.4-08 of German ZLS and its amendments, analysis was performed by GC-MS.. Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . CAS NO. Unit. MDL. 002. Naphthalene(NAP) . 91-20-3. mg/kg. 0.1 ND Acenaphthylene(ANY) . 208-96-8. mg/kg. 0.1 ND Acenaphthene(ANA) . 83-32-9. mg/kg. 0.1 ND Fluorene(FLU) . 86-73-7. mg/kg. 0.1 ND Phenanthrene(PHE) . 85-01-8. mg/kg. 0.1 ND Anthracene(ANT) . 120-12-7. mg/kg. 0.1 ND Fluoranthene(FLT) . 206-44-0. mg/kg. 0.1 ND Pyrene(PYR) . 129-00-0. mg/kg. 0.1 ND Benzo(a)anthracene(BaA) . 56-55-3. mg/kg. 0.1 ND Chrysene(CHR) . 218-01-9. mg/kg. 0.1 ND 205-99-2/205-82-3 . 207-08-9. mg/kg. 0.1 ND mg/kg. 0.1 ND Benzo(e)pyrene(BeP) . 192-97-2. mg/kg. 0.1 ND Benzo(a)pyrene(BaP) . 50-32-8. mg/kg. 0.1 ND Indeno(1,2,3-c,d)pyrene(IPY) . 193-39-5. mg/kg. 0.1 ND Dibenzo(a,h)anthracene(DBA) . 53-70-3. mg/kg. 0.1 ND Benzo(g,h,i)perylene(BPE) . 191-24-2. mg/kg. 0.1 ND mg/kg. - ND Test Item(s). Benzo(b)fluoranthene(BbF) + Benzo(j)fluoranthene(BjF) . Benzo(k)fluoranthene(BkF) . Sum of 18 PAHs . Page 4 of 13. Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Phthalate. Test Method : . With reference to EN14372: 2004. Analysis was performed by GC-MS. . CAS NO. Unit. MDL. 002. Dibutyl Phthalate (DBP) . 84-74-2. %(w/w). 0.003 ND Benzylbutyl Phthalate (BBP) . 85-68-7. %(w/w). 0.003 ND Bis(2-ethylhexyl) Phthalate (DEHP). 117-81-7. %(w/w). 0.003 ND Diisononyl Phthalate (DINP) . 28553-12-0 / 68515-48-0. %(w/w). 0.010 ND Di-n-octyl Phthalate (DNOP) . 117-84-0. %(w/w). 0.003 ND Test Item(s). Page 5 of 13. Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . CAS NO. Unit. MDL. 002. 26761-40-0 / 68515-49-1. %(w/w). 0.010 ND Dimethyl Phthalate (DMP) . 131-11-3. %(w/w). 0.003 ND Diethyl Phthalate (DEP) . 84-66-2. %(w/w). 0.003 ND Diisobutyl Phthalate (DIBP) . 84-69-5. %(w/w). 0.003 ND Dinonyl Phthalate (DNP) . 84-76-4. %(w/w). 0.003 ND 27554-26-3. %(w/w). 0.010 ND Dipropyl Phthalate (DPrP) . 131-16-8. %(w/w). 0.003 ND Dicyclohexyl Phthalate (DCHP) . 84-61-7. %(w/w). 0.003 ND Di-n-pentyl Phthalate (DnPP) . 131-18-0. %(w/w). 0.003 ND Dibenzyl Phthalate (DBzP) . 523-31-9. %(w/w). 0.003 ND Diphenyl Phthalate (DPhP) . 84-62-8. %(w/w). 0.003 ND Di-n-hexyl Phthalate (DnHP) . 84-75-3. %(w/w). 0.003 ND Test Item(s). Diisodecyl Phthalate (DIDP) . Diisooctyl Phthalate (DIOP) . Page 6 of 13. Notes :. (1)DBP,BBP,DEHP Reference information: Entry 51 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 2005/84/EC): i) Shall not be used as substances or in mixtures, in concentrations greater than 0.1 % by weight of the plasticised material, in toys and childcare articles.   Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Page 7 of 13. ii) Toys and childcare articles containing these phthalates in a concentration greater than 0.1 % by weight of the plasticised material shall not be placed on the market. Please refer to Regulation (EC) No 552/2009 to get more detail information (2)DINP, DNOP, DIDP Reference information: Entry 52 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 2005/84/EC).   i) Shall not be used as substances or in mixtures, in concentrations greater than 0.1 % by weight of the plasticised material, in toys and childcare articles which can be placed in the mouth by children. ii) Such toys and childcare articles containing these phthalates in a concentration greater than 0.1 % by weight of the plasticised material shall not be placed on the market. Please refer to Regulation (EC) No 552/2009 to get more detail information . Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Page 8 of 13. ATTACHMENTS RoHS Testing Flow Chart 1) Name of the person who made testing: Bruce Xiao / Sunny Hu 2) Name of the person in charge of testing: Bella Wang / Cutey Yu 3) These samples were dissolved totally by pre -conditioning method according to below flow chart (Cr6+ and PBBs/PBDEs test method excluded ). Sample Preparation Sample Measurement Pb/Cd/Hg Acid digestion with microwave/ hotplate Sample solvent extraction Filtration Concentration/ Dilution of extraction solution Solution Residue Filtration 1) Alkali Fusion / Dry Ashing 2) Acid to dissolve ICP-OES/AAS DATA Cr6+ PBBs/PBDEs GC-MS DATA Nonmetallic material Adding digestion reagent Heating to 90~95℃ for extraction Filtration and pH adjustment Adding 1,5diphenylcarbazide for color development Metallic material Positive Spot test Negative Boiling water extraction Adding 1,5diphenylcarbazide for color development UV-Vis A red color indicates the presence of Cr 6+. If necessary , confirm with UV-Vis. DATA DATA Test Report. No. CANEC1503047702 ATTACHMENTS Phthalates Testing Flow Chart 1) Name of the person who made testing: Sunny Hu 2) Name of the person in charge of testing: Cutey Yu Sample cutting / preparation Sample Measurem ent Solvent extraction Concentration/Dilution Filtration GC-MS DATA Date: 13 Mar 2015 . Page 9 of 13. Test Report. No. CANEC1503047702 ATTACHMENTS PAHs Testing Flow Chart 1) Name of the person who made testing: Sunny Hu 2) Name of the person in charge of testing: Cutey Yu Sample cutting / preparation Sample Measurement Solvent extraction Concentration/Dilution Filtration GC-MS DATA Date: 13 Mar 2015 . Page 10 of 13. Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . ATTACHMENTS Halogen Testing Flow Chart 1) Name of the person who made testing: Hanming Xiao 2) Name of the person in charge of testing: Bella Wang Sample cutting / preparation Sample Measur ement Combustion in oxygen bomb Dissolved in an absorption solution Filtration Analyzed by ion chromatography. Double confirm by other instruments, if necessary DATA Page 11 of 13. Test Report. No. CANEC1503047702 ATTACHMENTS Elementary Testing Flow Chart 1) Name of the person who made testing : Bruce Xiao 2) Name of the person in charge of testing : Bella Wang Sample cutting / preparation Sample Measurement Acid digestion Filtration Solution ICP-OES/AAS DATA Date: 13 Mar 2015 . Page 12 of 13. Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Sample photo: . CANEC1503047702 CAN15-030477.002 . SGS authenticate the photo on original report only . *** End of Report *** . Page 13 of 13. 
         !"#  "" $
 %&% '($ )& 
*$& &%"+
"
$# +& "
,$    -"%$&"
.//012/34050 672188181187./.9/1 ':
 /621162//; 1/ ++7  )"